Author(s)

Yahui Wu¹, Ruwan Gajaweera², Jeremy Everard²

¹Department of Research and Development, Anhui Tatfook Technology Co., Ltd., Shenzhen, China.
²Department of Electronic Engineering, University of York, York, UK.

This paper presents a study of a non-uniform pitch helical resonator (NPHR) structure and the coupling mechanisms to design dual-passband filters. The previous research analyzes NPHR as a type of step impedance resonator (SIR), however, it does not give analytical equations or prediction for the dual-resonance characteristics of the NPHR structure discussed in this paper. Consequently, a circuit model is proposed to analyze the dual-resonance characteristics of NPHRs. Analytical equations are derived, showing that the frequency ratio of a dual-band NPHR can be determined by the ratio of turns. EM simulation and experimental results have shown good agreement with the circuit analysis. The derived analytical equations from circuit model can be used for fast design of NPHRs. A step-width aperture is proposed to independently control the coupling coefficients at the each band of NPHRs. A third order dual-passband filter has been designed and fabricated. The filter has 3.3% and 3% fractional bandwidths at 789 MHz and 2402 MHz, respectively. The designed prototype filter shows that NPHRs can be utilized to realize compact filters with dual-band characteristics. The filter design can be extended from engineering perspective for application in wireless communication systems.

Helical Filter, Dual-Band, Circuit Model, Step-Width Aperture

Wu, Y. , Gajaweera, R. and Everard, J. (2022) Non-Uniform Pitch Helical Resonators for Dual-Passband Filter Design. Wireless Engineering and Technology, 13, 19-31. doi: 10.4236/wet.2022.132002.