Author(s)

Xiaoming Yang¹, Yang Gao², Wenzhong Zhang¹, Yanchun Wang^1*, Meihua Lan³

¹School of Geophysics and Information Technology, China University of Geosciences 1, Beijing, China.
²Key Laboratory of Coal Resources Exploration and Comprehensive Utilization, Ministry of Land and Resources, Xi’an, China.
³Information Center Computer Office, Daqing Drilling & Exploration Engineering Corporation No.1 Geo-Logging Company, Daqing, China.

In order to suppress the surface wave in three-component seismic exploration, according to the polarization characteristics of body wave and surface wave, a time-frequency domain polarization filtering method based on wavelet transform was studied. A covariance matrix was constructed in the time-frequency domain for the three-component seismic data, measured the polarization parameters of seismic waves. Combining the corresponding eigenvalues and eigenvectors of the matrix, the elliptic rate and elevation angle were used as constraints, and the polarization filter function was built to separate the surface waves. The separated surface waves were inversely transformed and then were adaptively subtracted from the original records. After the polarization filtering suppressed the surface wave, the signal-to-noise ratio of the converted wave was effectively improved. It laid a good foundation for the next seismic data processing and seismic exploration development. The actual data processing results show that the method can effectively extract surface waves from three-component seismic records and avoid the interference of surface waves on seismic signals.

Three-Component Seismic Data, Surface Wave, Polarization Filtering, Adaptation

Yang, X. , Gao, Y. , Zhang, W. , Wang, Y. and Lan, M. (2019) Polarization Filtering Method for Suppressing Surface Wave in Time-Frequency Domain. International Journal of Geosciences, 10, 481-490. doi: 10.4236/ijg.2019.104028.