Natural Resources

Volume 2, Issue 4 (December 2011)

ISSN Print: 2158-706X   ISSN Online: 2158-7086

Google-based Impact Factor: 0.89  Citations  h5-index & Ranking

Recycling of Ornamental Stones Hazardous Wastes

HTML  Download Download as PDF (Size: 2301KB)  PP. 244-249  
DOI: 10.4236/nr.2011.24031    3,763 Downloads   8,211 Views  Citations

Affiliation(s)

.

ABSTRACT

Sawing and polishing of the ornamental stones always generate large amount of solid and wet hazardous wastes, which pollute the environment. In Shak Al-Thoaban area, East Cairo, Egypt, huge amounts of these wastes were accumulated, during the last years, as rejects “Solid” and wet “Sahala” wastes, representing one of the main sources of environmental pollution. The aim of this work is to characterize and evaluate these wastes for recycling in quicklime production. Hence, samples of both wastes were investigated for their chemical and mineral composition applying XRF, XRD, DTA and TGA methods. Free lime content and reactivity (RDIN) of both samples were also determined after calcination for differnt soaking times (0.25 - 2.0 hrs) at 1000℃. The results were interpreted in relation to composition and microstructure of the fired samples as revealed by TLM and SEM methods. The RDIN reactivity of the resulted lime is changeable along soaking time at 1000℃because of the microfabric of its crystallites. The lime of the “Solid” sample is preserving the original limestone microstructure that contributes in its higher RDIN reactivity values at all soaking times. The relatively higher degree of grain growth of lime crystallites in the “Sahala” sample leads to its lower reactivity. The optimum soaking times for the highest lime reactivity are 0.25 and 1 hr. for the “Solid” and “Sahala” samples, respectively. On increasing soaking time up to 2 hrs, both samples show minimum RDIN values. The “Solid” sample also gives higher free lime content than the “Sahala” one at all soaking times. It is gradually increased in the former sample up to a maximum (96% - 97%) on increasing soaking time up to 1-2hrs. On the other side, a maximum free lime (~95%) is detected in “Sahala” sample at 0.25hr soaking time and gradually decreased to (87%) up to 2hrs.

Share and Cite:

A. Soltan, Z. Taman and B. El-Kaliouby, "Recycling of Ornamental Stones Hazardous Wastes," Natural Resources, Vol. 2 No. 4, 2011, pp. 244-249. doi: 10.4236/nr.2011.24031.

Cited by

[1] Field-testing and characterization of Technosols made from industrial and agricultural residues for restoring degraded slopes in semiarid SE Spain
2021
[2] Amelioration of Soil Expansion Using Calcined Ornamental Stones Hazardous Carbonate Wastes
2021
[3] Synthesis and Physical Characteristics of New Glasses from Some Environmental Wastes
Silicon, 2018
[4] Fabrication and Characterization of Glass and Glass-Ceramic from Cement Dust and Limestone Dust
Silicon, 2018
[5] Європейська інтеграція: поводження з відходами каменеобробних підприємств в Україні
2017
[6] EUROPEAN INTEGRATION: TREATMENT OF STONE PROCESSING ENTERPRISES WASTE IN UKRAINE
2017
[7] Management of waste of stone processing in the framework of Euro integration of Ukraine
2017
[8] Efficient removal of mercury from aqueous solutions and industrial effluent
Journal of Environmental Science and Health, Part A, 2015
[9] Studying Effect of SiO2 on Elastic Properties of Glasses Based On Environmental Tailings Using a Nondestructive Ultrasonic Method
Int. J. New. Hor. Phys, 2015
[10] Marble Stone Waste as Raw Material for Autoclaved Sand-Lime Bricks
InterCeram: International Ceramic Review, 2013

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.