Author(s)

K. Suresh¹, Dr. R. Arulmozhiyal²

¹Anna University, Chennai, India.
²Department of Electrical and Electronics Engineering, Research Head SONA-PEDAC, Sona College of Technology, Salem, India.

This paper proposes a design and implementation of the bi-directional DC-DC converter for Wind Energy Conversion System. The proposed project consists of boost DC/DC converter, bi-directional DC/DC converter (BDC), permanent magnet DC generator and batteries. A DC-DC boost converter is interface with proposed wind system to step up the initial generator voltage and maintain constant output voltage. The fluctuation nature of wind makes them unsuitable for standalone operation. To overcome the drawbacks an energy storage device is used in the proposed system to compensate the fluctuations and to maintain a smooth and continuous power flow in all operating modes to load. Bi-directional DC-DC converter (BDC) is capable of transforming energy between two DC buses. It can operate as a boost converter which supplies energy to the load when the wind generator output power is greater than the required load power. It also operates in buck mode which charges from DC bus when output power is less than the required load power. The proposed converter reduces the component losses and increases the performance of the overall system. The complete system is implemented in MATLAB/SIMULINK and verified with hardware.

Bidirectional DC/DC Converter, Boost DC/DC Converter, Wind Turbine Generation System (WTGS), Permanent Magnet DC Generator (PMDC)

Suresh, K. and Arulmozhiyal, D. (2016) Design and Implementation of Bi-Directional DC-DC Converter for Wind Energy System. Circuits and Systems, 7, 3705-3722. doi: 10.4236/cs.2016.711311.