[1]
|
Effect of hybrid silica incorporation on the mechanical properties of denture base acrylic resin
|
|
Atatürk üniversitesi Di? Hekimli?i Fakültesi Dergisi
NULL |
|
|
[2]
|
An investigated organic and inorganic reinforcement as an effective economical filler of poly (methyl methacrylate) nanocomposites
|
|
Sheikh, A Hassan - Scientific Reports,
2022 |
|
|
[3]
|
Investigation on the Potential Use of Polypropylene Mesh for the Reinforcement of Heat-Polymerized PMMA Denture Base Resin
|
|
Polymers,
2022 |
|
|
[4]
|
Effect of Reinforced Self-Cured Acrylic Resin on Flexural Strength
|
|
International Journal of …,
2022 |
|
|
[5]
|
Alternative Denture Base Materials for Allergic Patients
|
|
Oral Health Care,
2022 |
|
|
[6]
|
Incorporation of Treated Woven Carbon Fiber to Methacrylate Resin for Heat-Cured Acrylic Denture Composite
|
|
Journal of Biomimetics …,
2022 |
|
|
[7]
|
Effect of two cleansing materials on hardness and surface roughness of conventional and three-dimensional printed denture base materials
|
|
Olimy, A Salem - Tanta Dental Journal,
2022 |
|
|
[8]
|
Comparative Investigation on the Effect of Fiber Additives with Different Characteristics on the Mechanical Strength of Heat-cured PMMA Denture Base Resins
|
|
2022 |
|
|
[9]
|
Potency of Banana (Musa acuminata Linn.) Stem Fiber as a Reinforcement Material for Heat Cured Acrylic Resin
|
|
Materials Science Forum,
2022 |
|
|
[10]
|
The Impact of the Type and Concentration of Different Additives on the Water Sorption of Denture Base Resin
|
|
Al-Rafidain Dental Journal,
2022 |
|
|
[11]
|
Assessment of the Mechanical Properties of Hybrid Polymer Composites for Denture Applications.
|
|
Journal of Physical Science,
2022 |
|
|
[12]
|
Comparing Masticatory Efficiency of Implant Supported Overdenture With Two Different Denture Base Materials
|
|
Al-Azhar Assiut Dental …,
2022 |
|
|
[13]
|
PENGARUH PENAMBAHAN SERAT RAMI DAN BATANG PISANG TERHADAP KEKUATAN IMPAK DAN FLEKSURAL BASIS GIGI TIRUAN AKRILIK
|
|
B-Dent: Jurnal …,
2022 |
|
|
[14]
|
Evaluation of Impact Strength of Silver Nano-Particles Reinforced Heat-Activated Polymethylmethacrylate (Pmma) Resin at Various Proportions
|
|
Int J Cur Res Rev| Vol,
2021 |
|
|
[15]
|
Evaluation of flexural strength and radiopacity of polymethyl methacrylate incorporated with kenaf fiber
|
|
Annals of the …,
2021 |
|
|
[16]
|
Комплексная стоматологическая реабилитация пациентов с приобретенными сложночелюстными дефектами
|
|
2021 |
|
|
[17]
|
РОЛЬ ЛУЧЕВЫХ МЕТОДОВ ДИАГНОСТИКИ У ПАЦИЕНТОВ С ПРИОБРЕТЕННЫМИ ДЕФЕКТАМИ ЧЕЛЮСТНО-ЛИЦЕВОЙ ОБЛАСТИ
|
|
Российский электронный …,
2021 |
|
|
[18]
|
Evaluation of Flexural Strength of Polymethylmethacrylate Denture Base Resin Incorporated with Alkali and Heat-Treated Teak Wood Fibers and Ultra High …
|
|
Journal of Evolution of …,
2021 |
|
|
[19]
|
Impact strength of surface treated SS316L wires reinforced PMMA
|
|
Journal of the Mechanical …,
2021 |
|
|
[20]
|
Synthesis and Physical Characterization of PMMA/PP and PMMA/PAN Composites for Denture Applications
|
|
Journal of Applied …,
2021 |
|
|
[21]
|
Influence of dental glass fibers and orthopedic mesh on the failure loads of polymethyl methacrylate denture base resin
|
|
Saleh… - Polymers,
2021 |
|
|
[22]
|
Comparison of the Masticatory Force (with 3D Models) of Complete Denture Base Acrylic Resins with Reline and Reinforcing Materials
|
|
2021 |
|
|
[23]
|
Properties improvement of acrylic resin for denture application: effect of single and hybrid types of fillers with different weight loadings
|
|
2021 |
|
|
[24]
|
Perbedaan antara perlekatan Candida albicans pada glass fiber non dental dan e-glass fiber dental reinforced polymer setelah perendaman dalam NaOCl 0, 5% The …
|
|
2021 |
|
|
[25]
|
Flexural strength and anti-fungal activity of copper nano-particles on poly-methyl methacrylate denture base resins
|
|
2021 |
|
|
[26]
|
Reinforcement in Denture Base Resins-A Review
|
|
2021 |
|
|
[27]
|
Effect of carbon fibre layer with alumina and tri calcium phosphate on mechanical properties of denture base
|
|
2021 |
|
|
[28]
|
The comparison of surface hardness, water sorption and staining resistance between thermoplastic nylon and heat-cured acrylic resin.
|
|
2021 |
|
|
[29]
|
Effectof sisal fiber (Agavesisalana) andsurfacetreatmenton transverse strength in acrylic resin denture base repair
|
|
2021 |
|
|
[30]
|
Characteristics Polymer for Denture Base Modified by Siwak Particles
|
|
2020 |
|
|
[31]
|
STRENGTHENING THE REMOVABLE PROSTHESIS-CONTEMPORARY SOLUTION STILL VIABLE
|
|
2020 |
|
|
[32]
|
Effect of titanium oxide and zirconium oxide nanoparticle incorporation on the flexural strength of heat-activated polymethyl methacrylate denture base resins …
|
|
2020 |
|
|
[33]
|
MICROBIOLOGICAL CHARACTERISTICS OF THE ORAL CAVITY AFTER EXPOSURE OF VARIOUS FILLING MATERIALS
|
|
2020 |
|
|
[34]
|
Different Polymerization Methods for Dentistry Amount Internal Porosities: A Systematic Review
|
|
2020 |
|
|
[35]
|
Prosthodontic applications of polymethyl methacrylate (PMMA): an update
|
|
2020 |
|
|
[36]
|
Eighteen months follow-up with patient-centered outcomes assessment of complete dentures manufactured using a hybrid nanocomposite and additive CAD/CAM …
|
|
2020 |
|
|
[37]
|
Eighteen Months Follow-Up with Patient-Centered Outcomes Assessment of Complete Dentures Manufactured Using a Hybrid Nanocomposite and Additive CAD …
|
|
2020 |
|
|
[38]
|
Tensile and morphological properties of PMMA composite reinforced by Pistachio Shell powder used in denture applications
|
|
2020 |
|
|
[39]
|
AN OPTIMALLY SOLVING DENTISTRY INTERNAL PURITY IN HEAT POLYMERIZED ACRYLIC RESIN WITH DIFFERENT POLYMERIZATION METHODS
|
|
2020 |
|
|
[40]
|
COMPARISON OF FLEXURAL STRENGTH OF ZINC NANOPARTICLES REINFORCED RESIN WITH CONVENTIONAL HEAT CURED ACRYLIC RESIN
|
|
2020 |
|
|
[41]
|
Effect of different instrument systems on the quality of bio-ceramic obturation material
|
|
2020 |
|
|
[42]
|
Denture base reinforcing materials-A review
|
|
2020 |
|
|
[43]
|
Bergamot Essential Oil Effect against Candida Albicans Activity on Heat Cure Acrylic Denture Base
|
|
2020 |
|
|
[44]
|
Effect of Addition of Graphene and Carbon Nanotubes on Flexural Strength of Polymethylmethacrylate--A Comparative In-Vitro Study.
|
|
2020 |
|
|
[45]
|
UJI TEKAN POLYETHYLENE FIBER DENGAN FERULLE PADA INSISIVUS PERTAMA MAKSILA
|
|
2020 |
|
|
[46]
|
Isı ve Farklı Dozlarda Gama Işınları ile Polimerize Edilen Polietilen Fiberle Güçlendirilmiş Akrilik Rezinlerdeki Artık Monomer Miktarının HPLC ile Belirlenmesi
|
|
2020 |
|
|
[47]
|
Effects of biocompatible Nanofillers on mixed-mode I and II fracture toughness of PMMA base dentures
|
|
2020 |
|
|
[48]
|
Effects of denture cleansers on denture material properties—An observational Case—Control Study.
|
|
2020 |
|
|
[49]
|
Resistencia a la deflexión transversa de acrílico para base de dentadura con y sin insertos metálicos influenciados por cambios térmicos
|
|
2020 |
|
|
[50]
|
Enhancing the impact strength of acrylic resin base plate by adding non-dental E-glass fiber
|
|
Majalah Kedokteran Gigi Indonesia,
2020 |
|
|
[51]
|
Bergamot Essential Oil Effect against Candida Albicans Activity on Heat Cure Acrylic Denture Base.
|
|
2020 |
|
|
[52]
|
Влияние пломбировочных материалов на микробиоценоз полости рта
|
|
2020 |
|
|
[53]
|
PENGARUH PENAMBAHAN SERAT KACA PADA NILON TERMOPLASTIK DAUR ULANG DAN KOMBINASI TERHADAP KEKUATAN IMPAK
|
|
2020 |
|
|
[54]
|
Effect of Incorporation of Henna and Silver-nanoparticles on Surface Properties of PMMA Acrylic Resin
|
|
2020 |
|
|
[55]
|
Effect of Addition of Graphene and Carbon Nanotubes on Flexural Strength of Polymethylmethacrylate-A Comparative In-Vitro Study
|
|
Journal of Evolution of Medical and Dental …,
2020 |
|
|
[56]
|
Evaluation of the surface roughness of four different types of acrylic resin denture base materials: heat cure (HC), high impact heat cure (HIHC), heat cure clear (HCC) …
|
|
المجلة الليبية للعلوم والتقنية,
2020 |
|
|
[57]
|
Evaluation of Water Sorption of Various Heat-Curing Acrylic Resins and the Effect of Aqueous Environment on its Fracture Toughness
|
|
Libyan Journal of Dentistry,
2020 |
|
|
[58]
|
Evaluation of some properties of recycled polymethylmethacrylate incorporated to the acrylic resin
|
|
International Journal of …,
2020 |
|
|
[59]
|
PENGARUH PENAMBAHAN SERAT KACA PADA NILON TERMOPLASTIK DAUR ULANG TERHADAP KEKUATAN IMPAK
|
|
B-Dent: Jurnal Kedokteran Gigi …,
2020 |
|
|
[60]
|
ــــــــــــــــــــــــ ـــــ ـ ـــــــــ ــــــ ــــــــــ ــــــــــــــــــــــــــــــــــ
|
|
2020 |
|
|
[61]
|
Effects of denture base thicknesses and reinforcement on fracture strength in mandibular implant overdenture with bar attachment: under various acrylic resin …
|
|
2019 |
|
|
[62]
|
Hybrid denture acrylic composites with nanozirconia and electrospun polystyrene fibers
|
|
2019 |
|
|
[63]
|
Hybrid denture acrylic composites with nanozirconia and electrospun polystyrene fibers.
|
|
2019 |
|
|
[64]
|
Evaluation of the Flexural Strength of Heat Polymerized Poly (Methyl Methacrylate) Denture Resin Reinforced With Fibres: An In Vitro Study
|
|
2019 |
|
|
[65]
|
Evaluation of the antimicrobial activity of heat-cure denture base resin materials incorporated with silver nanoparticles
|
|
2019 |
|
|
[66]
|
A comparative study of heat-cured and gamma-cured fiber-reinforced denture-base acrylic resins: Residual monomer and flexural strength
|
|
2019 |
|
|
[67]
|
Perbedaan lama perendaman glass fiber non dental reinforced composite dalam saliva buatan terhadap perubahan dimensi The difference in immersion time of non …
|
|
2019 |
|
|
[68]
|
PERANAN PENAMBAHAN ZIRKONIUM OKSIDA PADA MAHKOTA PROVISIONAL RESIN AKRILIK POLIMERISASI PANASPERANAN PENAMBAHAN ZIRKONIUM …
|
|
2019 |
|
|
[69]
|
Effect of addition of silver nanoparticles on flexural and im-pact strength of heat cure acrylic resin
|
|
2019 |
|
|
[70]
|
Effects of Denture Base Thicknesses and Reinforcement on Fracture Strength in Mandibular Implant Overdenture with Bar Attachment: Under Various Acrylic Resin Types
|
|
European Journal of Dentistry,
2019 |
|
|
[71]
|
Importância do reforço em fibra de vidro na resistência de uma prótese removível
|
|
2019 |
|
|
[72]
|
Comparative Evaluation of Bond Strength between Ridge Lap Surface of Acrylic Teeth and Denture Base Resin: An In Vitro Study
|
|
2019 |
|
|
[73]
|
Monomer modifications of denture base acrylic resin: A systematic review and meta-analysis
|
|
2019 |
|
|
[74]
|
Synthesis of zirconia, organic and hybrid nanofibers for reinforcement of polymethyl methacrylate denture base: evaluation of flexural strength and modulus …
|
|
2019 |
|
|
[75]
|
EFFECT OF E-GLASS FIBER ADDITION ON MECHANICAL PROPERTIES OF HEAT-POLYMERIZED ACRYLIC RESIN DENTURE BASE
|
|
2019 |
|
|
[76]
|
Flexural Strength, Antimicrobial Activity and Color Stability of Ginger (zingiber officinale) Modified Heat Cured Denture Base Material
|
|
2019 |
|
|
[77]
|
Effects of Denture Base Thicknesses and Reinforcement on Fracture Strength in Mandibular Implant Overdenture with Bar Attachment: Under Various Acrylic …
|
|
2019 |
|
|
[78]
|
STUDYING THE EFFECT OF NATURAL BAMBOO AND RICE HUSK POWDERS ON COMPRESSIVE STRENGTH and HARDNESS OF ACRYLIC RESIN
|
|
2019 |
|
|
[79]
|
Recent Advances in Dental Composites: An Overview
|
|
2019 |
|
|
[80]
|
EVALUATION THE EFFECTS OF TWO METHODS OF INCORPORATION OF SILICA NANOPARTICLES INTO MICROWAVE TREATED AND UNTREATED …
|
|
2019 |
|
|
[81]
|
The effect of silicon carbide nanoparticles addition on some physical and mechanical properties of heat cured acrylic resin denture base material
|
|
2019 |
|
|
[82]
|
Effect of addition of silver nanoparticles on flexural and impact strength of heat cure acrylic resin
|
|
2019 |
|
|
[83]
|
PMMA/double-modified organoclay nanocomposites as fillers for denture base materials with improved mechanical properties
|
|
Journal of the Mechanical Behavior of Biomedical Materials,
2019 |
|
|
[84]
|
Effect of Thermocycling on Flexural Properties of Microcrystalline Cellulose‐Reinforced Denture Base Acrylic Resins
|
|
2019 |
|
|
[85]
|
Reinforcement of PMMA Denture Base Material with a Mixture of ZrO2 Nanoparticles and Glass Fibers
|
|
2019 |
|
|
[86]
|
Strength tests of the polymers used in dental prosthetics
|
|
2018 |
|
|
[87]
|
Pengaruh penambahan aluminium oksida terhadap kekuatan tarik dan tekan basis gigi tiruan resin akrilik polimerisasi panas The effect of addition of aluminium oxide …
|
|
2018 |
|
|
[88]
|
Review on poly-methyl methacrylate as denture base materials
|
|
2018 |
|
|
[89]
|
The Role of Antifungal Agents in Treating Denture Stomatitis
|
|
2018 |
|
|
[90]
|
Tribological Tests and Impact Tests of Acrylic Polymers for Dental Prosthetics
|
|
2018 |
|
|
[91]
|
Pengaruh Desinfeksi Basis Gigi Tiruan Resin Akrilik Polimerisasi Panas dengan Sodium Hipoklorit dan Minyak Jarak (Ricinus Communis Oil) Terhadap Jumlah …
|
|
2018 |
|
|
[92]
|
Pengaruh Penambahan Aluminium Oksida pada Bahan Basis Gigi Tiruan Resin Akrilik Polimerisasi Panas Terhadap Kekuatan Tensil dan Kompresif
|
|
2018 |
|
|
[93]
|
The effect of recycled polymethylmethacrylate on some physical and chemical properties of acrylic resin denture base
|
|
International Journal of Enhanced Research in Science, Technology & Engineering,
2018 |
|
|
[94]
|
Effect of Denture Base Reinforcement Using Light Cured E-Glass Fibers on the Level of Salivary Immunoglobulin A
|
|
2018 |
|
|
[95]
|
Effect of E-glass Fibers with Conventional Heat Activated PMMA Resin Flexural Strength and Fracture Toughness of Heat Activated PMMA Resin
|
|
2018 |
|
|
[96]
|
Reinforcement of Heat Cured Denture Base Material with Combination of Silanized Polyamide and Polyester Fibers and its Effect on Some Mechanical …
|
|
2018 |
|
|
[97]
|
Pengaruh Penambahan Nilon Murni Kedalam Nilon Daur Ulang terhadap Compressive Yield Strength Basis Gigi Tiruan Nilon Termoplastik
|
|
2018 |
|
|
[98]
|
Recent Advances and Future Perspectives for Reinforcement of Poly (methyl methacrylate) Denture Base Materials: A Literature Review
|
|
2018 |
|
|
[99]
|
Utjecaj ojačala na svojstva dentalnih akrilata
|
|
2018 |
|
|
[100]
|
The effects of adding various ratios of zirconium oxide nanoparticles to poly (methyl methacrylate) on physical and mechanical properties
|
|
Journal of oral science,
2018 |
|
|
[101]
|
COMPARISON OF THE INFRA-RED ABSORPTION PEAKS OF UNTREATED AND SILANE TREATED GLASS FIBERS THROUGH FOURIER TRANSFORM INFRA …
|
|
2018 |
|
|
[102]
|
Improving the Strength Properties of Denture Base Acrylic Resins Using Hibiscus Sabdariffa Natural Fiber
|
|
2018 |
|
|
[103]
|
Surface roughneSS, hardneSS, color Stability, Water Sorption and Water Solubility of pMMa denture baSeMaterial reinforced With SyntheSizedinorganic, organic, and …
|
|
2018 |
|
|
[104]
|
Microbiological evaluation of acrylic resin modified with silver and gold nanoparticles
|
|
2018 |
|
|
[105]
|
PENGARUH PENAMBAHAN SERAT KEPOMPONG ULAT SUTRA (Bombyx mori) TERDAHAP KEKUATAN TEKAN RESIN KOMPOSIT FLOWABLE
|
|
2018 |
|
|
[106]
|
EFFECT OF INCORPORATION OF SILVER NANO-PARTICLES ON THE REPAIRABILITY OF CONVENTIONAL AND MICROWAVE DENTURE BASES
|
|
2018 |
|
|
[107]
|
Surface Roughness, Hardness, Color Stability, Water Sorption and Water Solubility of PMMA Denture BaseMaterial Reinforced with SynthesizedInorganic …
|
|
2018 |
|
|
[108]
|
Comparison of biting force and masticatory efficiency in patient with different denture base material
|
|
2018 |
|
|
[109]
|
Reinforcement of Heat Cured Denture Base Material with Combination of Silanized Polyamide and Polyester Fibers and its Effect on Some Mechanical Properties
|
|
2018 |
|
|
[110]
|
The Difference of Impact Strength in Acrylic Resin Self-Cured with the Addition of Zirconium Dioxide (ZrO2) Nanoparticles
|
|
2018 |
|
|
[111]
|
Comparing the Shear Bond Strength with Acrylic Teeth, Hardness, Surface Roughness and Cost-benefit of three Different Denture Base Materials
|
|
2018 |
|
|
[112]
|
Physical and mechanical properties of heat activated acrylic denture base resin materials
|
|
2018 |
|
|
[113]
|
Effect of Addition Of Zirconium Oxide Nanoparticles on Flexural Strength and Porosity of Heat Cure Acrylic Resin
|
|
2018 |
|
|
[114]
|
Effect of Denture Base Reinforcement Using Light Cured E-Glass Fibers on the Level of Salivary Immunoglobulin A. Open Access Maced J Med Sci. 2018 Nov …
|
|
2018 |
|
|
[115]
|
Effect of Nanoparticles Incorporated to Denture Bases on Somephysicomechnicalproperties
|
|
2018 |
|
|
[116]
|
?MPLANT üSTü BAR TUTUCULU PROTEZLERDE FARKLI MALZEMELERLE Gü?LEND?R?LEN ?E??TL? AKR?L?K KA?DE KALINLIKLARININ KIRILMA DAYANIMINA ETK?S?
|
|
Thesis,
2018 |
|
|
[117]
|
Susunan Redaksi
|
|
2018 |
|
|
[118]
|
PENGARUH POSISI SILKWORM FIBER TERHADAP KEKUATAN DIAMETRAL SILKWORM FIBER REINFORCED COMPOSITE
|
|
2018 |
|
|
[119]
|
Effect of palm oil based microcrystalline cellulose on properties of acrylic denture base resins/Amira Ali Abdel Rahaman Ali
|
|
2017 |
|
|
[120]
|
Silane Coupling Agents–Benevolent Binders in Composites
|
|
2017 |
|
|
[121]
|
A comparative study to check fracture strength of provisional fixed partial dentures made of autopolymerizing polymethylmethacrylate resin reinforced with …
|
|
2017 |
|
|
[122]
|
Effect of Incorporating Two Different Woven Glass Fiber Reinforcent on the Flexural Strength of Acrylic Denture Base Materials
|
|
2017 |
|
|
[123]
|
Long Term Evaluation of Anterior Primary Resin Crown in Pediatric Patient
|
|
2017 |
|
|
[124]
|
Résines employées dans la fabrication des bases prothétiques amovibles complètes: données actuelles et perspectives
|
|
2017 |
|
|
[125]
|
Properties of different fillers in acrylic resin for denture application
|
|
2017 |
|
|
[126]
|
Effect of incorporating two different woven glass fiber reinforcement on the flexural strength of acrylic denture base materials
|
|
2017 |
|
|
[127]
|
Silane Coupling Agents-Benevolent Binders in Composites.
|
|
2017 |
|
|
[128]
|
Evaluation and Comparison of Flexural Strength of Conventional Heat Cured Denture Base Polymers with Nylon Denture Base Polymers: An In Vitro Study
|
|
2017 |
|
|
[129]
|
Evaluation of the biological activity of plant extracts of Algerian Solanum elaeagnifolium
|
|
Research journal of Pharmaceutical, Biological and Chemical Sciences,
2017 |
|
|
[130]
|
Preparation and Investigation of some Properties of Acrylic Resin Reinforced with Siwak Fiber Used for Denture Base Applications
|
|
2017 |
|
|
[131]
|
Influence of Silver Nanoparticles Incorporation on Flexural Strength of Heat-cure Acrylic Denture Base Resin Materials
|
|
Annual Research & Review in Biology,
2017 |
|
|
[132]
|
The efficacy of Hibiscus sabdariffa as a fibre-reinforcement material for denture base acrylic resins
|
|
2017 |
|
|
[133]
|
Fracture Strength of Acrylic Resin Reinforced with Glass Fibers in Simulated Implant-Supported Overdenture Abutments
|
|
2017 |
|
|
[134]
|
To Evaluate And Compare The Effect Of Different Curing Cycles On Residual Monomer, Porosity And Flexural Strength Of Denture Base Resin-An In Vitro Study
|
|
Doctoral dissertation, KLE University, Belagavi, Karnataka,
2017 |
|
|
[135]
|
The Effect of Additives on Denture Base Resin Properties
|
|
Journal of Al-Nahrain University,
2017 |
|
|
[136]
|
PMMA denture base material enhancement: a review of fiber, filler, and nanofiller addition
|
|
International journal of nanomedicine,
2017 |
|
|
[137]
|
HİBRİT SİLİKA İLAVESİNİN AKRİLİK KAİDE MATERYALİNİN MEKANİK ÖZELLİKLERİNE ETKİSİ
|
|
Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi,
2017 |
|
|
[138]
|
A comparative study to check fracture strength of provisional fixed partial dentures made of autopolymerizing polymethylmethacrylate resin reinforced with different materials: An in vitro study
|
|
The Journal of Indian Prosthodontic Society,
2017 |
|
|
[139]
|
Effect of Additives on Impact Strength of Denture Base Resin
|
|
Iraqi Journal of Science,
2017 |
|
|
[140]
|
Influencia de los cambios térmicos en la resistencia flexural de los acrílicos de termocurado para la base de dentaduras con y sin insertos metálicos: Estudio in vitro
|
|
Odontología,
2017 |
|
|
[141]
|
Jumlah Porositas Internal Resin Akrilik Polimerisasi Panas dengan Metode Polimerisasi yang Berbeda
|
|
2017 |
|
|
[142]
|
Pengaruh Penambahan Zirkonium Oksida pada Bahan Basis Gigi Tiruan Resin Akrilik Polimerisasi Panas Terhadap Kekuatan Impak dan Transversal
|
|
2017 |
|
|
[143]
|
PENGARUH PENAMBAHAN ZIRKONIUM OKSIDA DAN SERATPOLIPROPILEN TERHADAP KEKUATAN IMPAK DAN TRANSVERSALBAHAN BASIS GIGI TIRUAN RESIN AKRILIK POLIMERISASI PANAS
|
|
2017 |
|
|
[144]
|
Pengaruh Penambahan Zirkonium Oksida dan Serat Polipropilen Terhadap Kekuatan Impak dan Transversal pada Bahan Basis Gigi Tiruan Resin Akrilik …
|
|
2017 |
|
|
[145]
|
The Assessment of Some Physical and Mechanical Properties of PMMA Added Different Forms of Nano-ZrO2
|
|
2017 |
|
|
[146]
|
To Evaluate And Compare The Effect Of Different Curing Cycles On Residual Monomer, Porosity And Flexural Strength Of Denture Base Resin-An In Vitro …
|
|
2017 |
|
|
[147]
|
Pengaruh Perendaman Pada Saliva Buatan Selama 14 Hari Pada Glass Fiber Non Dental Dan Glass Fiber Dental Terhadap Perlekatan Bakteri Streptococcus …
|
|
2017 |
|
|
[148]
|
Pengaruh Penambahan Zirkonium Oksida dan Serat Polipropilen Terhadap Kekuatan Impak dan Transversal pada Bahan Basis Gigi Tiruan Resin Akrilik Polimerisasi …
|
|
2017 |
|
|
[149]
|
PENGARUH PENAMBAHAN ZIRKONIUM OKSIDA DAN SERAT POLIPROPILEN TERHADAP KEKUATAN IMPAK DAN TRANSVERSAL BAHAN BASIS GIGI TIRUAN …
|
|
2017 |
|
|
[150]
|
Effect of Mixing Silanized Poly Propylene and Siwak Fibers on Some Physical and Mechanical Properties of Heat Cure Resin Denture Base
|
|
2016 |
|
|
[151]
|
THE EFFECT OF COMPOSITION GLASS FIBRE NON DENTAL AND GLASS FIBER NON DENTAL IN FIBER REINFORCED COMPOSITE TO THE STREPTOCOCCUS …
|
|
2016 |
|
|
[152]
|
Evaluation of the Effect of silanized Zirconium Oxide nano-fillers and Plasma Treated polypropylene fibers Addition on some Properties of Heat Cured Acrylic Resin …
|
|
MUSTANSIRIA DENTAL JOURNAL,
2016 |
|
|
[153]
|
Fabrication of Hair and Copper Fiber Reinforced Polymethyl Methacrylate (PMMA) Composites and Evaluation of Their Mechanical Properties, Thermal …
|
|
2016 |
|
|
[154]
|
Evaluation of the morphology and structure of e glass fiber-reinforced composites for cranio-facial bone reconstruction
|
|
2016 |
|
|
[155]
|
Evaluation of the Mechanical and Radiopacity Properties of Poly (methyl methacrylate)/Barium Titanate-denture Base Composites
|
|
Polymers & Polymer Composites,
2016 |
|
|
[156]
|
Fabrication of hair and copper fiber reinforced Polymethyl methacrylate (PMMA) composites and evaluation of their mechanical properties, thermal conductivity and color stability for dental applications
|
|
Trends in Biomaterials and Artificial Organs,
2016 |
|
|
[157]
|
Fourier Transform Infrared (FT-IR) Spectroscopy of Modified Heat Cured Acrylic Resin Denture Base Material
|
|
International Journal of Enhanced Research in Science, Technology & Engineering,
2016 |
|
|
[158]
|
Effect Of Palatal Vault Depth On Flexural Strength Of Three Different High Impact Denture Base Resins - An In Vitro Study
|
|
Indian Journal Of Dental Sciences,
2016 |
|
|
[159]
|
The Effect of Silica and Prepolymer Nanoparticles on the Mechanical Properties of Denture Base Acrylic Resin
|
|
Journal of Prosthodontics,
2016 |
|
|
[160]
|
EVALUATION OF THE MORPHOLOGY AND STRUCTURE OF E GLASS FIBER-REINFORCED COMPOSITES FOR CRANIO-FACIAL BONE RECONSTRUCTION.
|
|
Studia Universitatis Babes-Bolyai, Chemia,
2016 |
|
|
[161]
|
PENGARUH POSISI SERAT KACA (FIBERGLASS) YANG BERBEDA TERHADAP KEKUATAN FLEKSURAL FIBER REINFORCED ACRYLIC RESIN
|
|
2016 |
|
|
[162]
|
Fabrication of hair and copper fiber reinforced polymethyl methacrylate (PMMA) composites and evaluation of their mechanical properties, thermal conductivity …
|
|
2016 |
|
|
[163]
|
Pengaruh Penambahan Nilon Termoplastik Murni Ke Dalam Nilon Daur Ulang Terhadap Kekuatan Transversal Basis Gigi Tiruan Nilon Termoplastik
|
|
2016 |
|
|
[164]
|
PENGARUH PENAMBAHAN SERAT KACA TERHADAP KEKASARAN PERMUKAAN DAN PENYERAPAN AIR BAHAN BASIS GIGI TIRUAN NILON TERMOPLASTIK
|
|
2016 |
|
|
[165]
|
Evaluation of the Effect of silanized Zirconium Oxide nano-fillers and Plasma Treated polypropylene fibers Addition on some Properties of Heat Cured Acrylic …
|
|
2016 |
|
|
[166]
|
Study of the effects of inorganic fibre fabric and mat reinforcement on the properties of polyurethane elastomers fabricated by injection moulding
|
|
2015 |
|
|
[167]
|
Evaluation and comparison of the transverse strength of two heat cure denture base resins repaired with auto polymerizing resin by wetting with Methyl …
|
|
British Journal of …,
2015 |
|
|
[168]
|
PENGARUH PENAMBAHAN SERAT KACA DAN SERAT POLIESTER TERHADAP KEKUATAN IMPAK BAHAN BASIS GIGITIRUAN RESIN AKRILIK …
|
|
B-Dent: Jurnal …,
2015 |
|
|
[169]
|
PENGARUH KOMPOSISI BEBERAPA GLASS FIBER NON DENTAL TERHADAP KEKUATAN FLEKSURAL FIBER REINFORCED COMPOSITES
|
|
B-Dent: Jurnal Kedokteran …,
2015 |
|
|
[170]
|
Evaluation and comparison of the transverse strength of two heat cure denture base resins repaired with auto polymerizing resin by wetting with Methyl Methacrylate …
|
|
2015 |
|
|
[171]
|
Vpliv vgradnje nanodelcev al (oh) 3 na lastnosti utrjenih akrilnih kompozitov
|
|
2015 |
|
|
[172]
|
Conventional and Contemporary polymers for the fabrication of denture prosthesis: part I–Overview, composition and properties
|
|
International Journal of Applied Dental Sciences,
2015 |
|
|
[173]
|
Effect of Glass Fibers or Metallic Filler on the Linear Dimensional Changes and Water Sorption of Acrylic Resin Denture Base Material
|
|
Int J Dentistry Oral Sci. S,
2015 |
|
|
[174]
|
Evaluation and Comparison of the Transverse Strength of Two Heat Cure Denture Base Resins Repaired with Auto Polymerizing Resin by Wetting with Methyl Methacrylate (MMA) at Different Time Intervals-An In vitro Study
|
|
British Journal of Medicine and Medical Research,
2015 |
|
|
[175]
|
The Effect of Zirconium Silicate Nanopowder Reinforcement on Some Mechanical and Physical Properties of Heat Cured Poly (Methyl Methacrylate) Denture Base Materials
|
|
Journal of Baghdad College of Dentistry,
2015 |
|
|
[176]
|
Poly (methyl methacrylate) denture base composites enhancement by various combinations of nitrile butadiene rubber/treated ceramic fillers
|
|
Journal of Thermoplastic Composite Materials,
2015 |
|
|
[177]
|
Exploration of Materials Used in 3-Dimensional Printing for the Dental Industry
|
|
Scripps Senior Theses,
2015 |
|
|
[178]
|
Effect of silver nanoparticles incorporation on viscoelastic properties of acrylic resin denture base material
|
|
European Journal of Dentistry,
2015 |
|
|
[179]
|
The effect of the addition of silanized Nano titania fillers on some physical and mechanical properties of heat cured acrylic denture base materials
|
|
Journal of Baghdad College of Dentistry,
2015 |
|
|
[180]
|
The effect of zirconium silicate nanopowder reinforcement on some mechanical and physical properties of heat cured poly (methyl methacrylate) denture base …
|
|
Journal of baghdad college of dentistry,
2015 |
|
|
[181]
|
PENGARUH ORIENTASI DAN VOLUMETRIK GLASS FIBER NON DENTAL TERHADAP KEKUATAN PERLEKATAN GESER FIBER REINFORCED COMPOSITES …
|
|
2015 |
|
|
[182]
|
Conventional and contemporary polymers for the fabrication of denture prosthesis: part I-overview, composition and properties
|
|
2015 |
|
|
[183]
|
The Effect of Zirconium Silicate Nanopowder Reinforcement on Some Mechanical and Physical Properties of Heat Cured Poly Methyl Methacrylate Denture Base …
|
|
2015 |
|
|
[184]
|
MASKING COMPLETE DENTURE REINFORCEMENTS OF METAL MESH - A TECHNICAL REPORT
|
|
International Journal of Current Research,
2015 |
|
|
[185]
|
Pemeriksaan komposisi glass fiber komersial dengan teknik x-ray fluorescence spectrometer (XRF)
|
|
2014 |
|
|
[186]
|
纳米 SiO_2 对 PMMA 基托树脂机械性能的影响
|
|
口腔颌面修复学杂志,
2014 |
|
|
[187]
|
of Dental Sciences
|
|
2014 |
|
|
[188]
|
Pengaruh Penambahan Serat Kaca dan Serat Polipropilen Terhadap Kekuatan Impak dan Transversal Pada Bahan Basis Gigi tiruan Resin Akrilik Polimerisasi Panas
|
|
dentika Dental Journal,
2014 |
|
|
[189]
|
Resistance to impact of cross-linked denture base biopolymer materials: Effect of relining, glass flakes reinforcement and cyclic loading
|
|
Journal of the Mechanical Behavior of Biomedical Materials,
2014 |
|
|
[190]
|
EFFECT OF ADDING MULTIDIRECTIONAL ORIENTED FIBERS ON MECHANICAL PROPERTIES OF DENTURE BASE RESIN
|
|
VYSOKÉ UČENÍ TECHNICKÉ V BRNĚ,
2014 |
|
|
[191]
|
Vickers Hardness and Specific Wear Rate of Poly Propylene Reinforced PMMA
|
|
M Mathew, K Shenoy, KS Ravishankar - ijss-sn.com,
2014 |
|
|
[192]
|
Perspectives for Titanium-Derived Fillers Usage on Denture Base Composite Construction: A Review Article
|
|
Advances in Materials Science and Engineering,
2014 |
|
|
[193]
|
Perbedaan Pengaruh Penambahan Serat Kaca dan Serat Poliester Terhadap Kekuatan Impak Bahan Basis Gigitiruan Resin Akrilik Polimerisasi panas
|
|
W Fransisca - 2014,
2014 |
|
|
[194]
|
Vickers hardness and Specifi c Wear rate of poly propylene reinforced PMMA
|
|
2014 |
|
|
[195]
|
The effect of addition of untreated and oxygen plasma treated polypropylene fibers on some properties of heat cured acrylic resin
|
|
Journal of Bagh College Dentistry ,
2013 |
|
|
[196]
|
Yrd. Doç. Dr. Pınar ÇEVİK1, Dr. Hakan ARINÇ2
|
|
|
|
|
[197]
|
Yrd. Doç. Dr. Pınar ÇEVİK
|
|
|
|
|
[198]
|
İmplantüstü bar tutuculu protezlerde farklı malzemelerle güçlendirilen çeşitli akrilik kaide kalınlıklarının kırılma dayanımına etkisi
|
|
|
|
|
[199]
|
Anxiety and depression assessment for patients with covid-19 during the isolation room in Wasit City.
|
|
Kinani, RM Jumaah
|
|
|
[200]
|
KUUMPOLÜMERISEERUVA AKRÜÜLI JA KARESTATUD AKRÜÜLHAMBA VAHELINE NAKKETUGEVUS
|
|
|
|
|
[201]
|
Farklı yöntemlerle polimerize edilen pmma kaide rezinlerine hibrit polimer ilavesinin mekanik özelliklere etkisi
|
|
|
|
|
[202]
|
ORTODONTILISE TRAADI JOOTELIIDESE TÕMBETUGEVUS KUI JOODIST ON JOOTMISEL ÜLEKUUMUTATUD
|
|
|
|
|
[203]
|
İmplant destekli mandibular overdenturelarda fiberle üretilmiş altyapıların stres analizi
|
|
|
|
|
[204]
|
Farklı yöntemlerle polimerize olan akrilik rezin sistemlerinin nanopartikül ilavesi sonucu mekanik ve fiziksel özelliklerinin değerlendirilmesi
|
|
|
|
|