Theoretical and Numerical Comparison of Limit Point Bifurcation and Maximum Force Criteria. Application to the Prediction of Diffuse Necking - Modeling and Numerical Simulation of Material Science

MNSMS > Vol.3 No.1, January 2013

Modeling and Numerical Simulation of Material Science

Volume 3, Issue 1 (January 2013)

ISSN Print: 2164-5345 ISSN Online: 2164-5353

Google-based Impact Factor: 0.7 Citations

Theoretical and Numerical Comparison of Limit Point Bifurcation and Maximum Force Criteria. Application to the Prediction of Diffuse Necking ()

HTML XML

Download as PDF (Size: 680KB) PP. 39-47

DOI: 10.4236/mnsms.2013.31006 4,770 Downloads 9,411 Views Citations

Author(s)

Guillaume Altmeyer

Affiliation(s)

Université de Lyon, CNRS INSA-Lyon, Villeurbanne, France.

ABSTRACT

A large number of criteria has been developed to predict material instabilities, but their choice is limited by the lack of existing comparison of their theoretical basis and application domains. To overcome this limitation, a theoretical and numerical comparison of two major models used to predict diffuse necking is present in this paper. Limit Point Bifurcation criterion is first introduced. An original formulation of the Maximum Force Criterion (MFC), taking into account the effects of damage and isotropic and kinematic hardenings, is then proposed. Strong connections are shown between them by comparing their theoretical basis. Numerical Forming Limit Diagrams at diffuse necking obtained with these criteria for different metallic materials are given. They illustrate the theoretical link and similar predictions are shown for both models.

KEYWORDS

Forming; Bifurcation Analysis; Maximum Force Criterion; Diffuse Necking; Forming Limit Diagram

Share and Cite:

G. Altmeyer, "Theoretical and Numerical Comparison of Limit Point Bifurcation and Maximum Force Criteria. Application to the Prediction of Diffuse Necking," Modeling and Numerical Simulation of Material Science, Vol. 3 No. 1, 2013, pp. 39-47. doi: 10.4236/mnsms.2013.31006.

Cited by

[1]	Probability and Mechanics of Ship Collision and Grounding
	2019

[2]	Investigation of tensile plastic instability and necking for AL2024T3 aluminum and S235JR steel alloys
	2019

[3]	The limit diagram under hot sheet metal forming. A review of constitutive models of material, viscous failure criteria and standard tests
	2018

[4]	Диаграмма предельных деформаций при горячей листовой штамповке металлов. Обзор моделей материала, критериев вязкого разрушения и …
	2018

[5]	The limit diagram under hot sheet metal forming: a review of constitutive models of material, viscous failure criteria and standard tests
	Journal of Samara State Technical University: Series Physical and Mathematical Sciences, 2017

[6]	Диаграмма предельных деформаций при горячей листовой штамповке металлов: обзор моделей материала, критериев вязкого разрушения и …
	2017

[7]	On the accuracy of fracture estimation in collision analysis of ship and offshore structures
	Marine Structures, 2015

[8]	Overview of the theoretical relations between necking and strain localization criteria.
	Congrès fran?ais de mécanique (21 ; 2013 ; Bordeaux (Gironde)), 2013

[9]	Overview of the theoretical relations between necking and strain localization criteria
	SAM, the Arts et Métiers ParisTech open access repository, 2013

[10]	Relations théoriques entre les critères d'instabilités plastiques
	21ème Congrès Fran?ais de Mécanique, 2013

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journals Menu

Home

About SCIRP

Service

Policies