|
[1]
|
مطالعه تجربي اثر پودر آلومينيوم نانو ساختار بر خواص يك PBX پايه HMX
|
|
NULL |
|
|
|
[2]
|
Failure Prediction in 3D Printed Kevlar/Glass Fiber-Reinforced Nylon Structures with a Hole and Different Fiber Orientations
|
|
Polymers,
2022 |
|
|
|
[3]
|
Comparative Study of Separation Performance of Hydroxy Sodalite Infused Polysulfone (HSOD/PSf) and Silica Sodalite Infused Polysulfone (SSOD/PSf) Membrane …
|
|
Journal of Membrane …,
2022 |
|
|
|
[4]
|
Failure Prediction in 3D Printed Kevlar/Glass Fiber-Reinforced Nylon Structures with a Hole and Different Fiber Orientations. Polymers 2022, 14, 4464
|
|
2022 |
|
|
|
[5]
|
Production of nanocellulose by enzymatic treatment for application in polymer composites
|
|
2021 |
|
|
|
[6]
|
Selection of appropriate reinforcement for nylon material through mechanical and damping characteristics
|
|
2021 |
|
|
|
[7]
|
Mechanical behaviour and empirical modelling of maize stalk nanoparticle reinforced epoxy composites
|
|
2020 |
|
|
|
[8]
|
Investigation on mechanical properties and wear performance of Nylon-6/Boron Nitride polymer composites by using Taguchi Technique
|
|
2020 |
|
|
|
[9]
|
Kaya Yünü Mineral Elyaf ve Mika Takviyeli Poliamid-6 Kompozitinin Termoset Polyester Kompozit Diske Karşı Aşınma Davranışları
|
|
Bilecik ?eyh Edebali üniversitesi Fen Bilimleri Dergisi,
2020 |
|
|
|
[10]
|
Enhancing tribo-mechanical properties and thermal stability of nylon 6 by hexagonal boron nitride fillers
|
|
2020 |
|
|
|
[11]
|
Investigation the Impact of Inorganic Fillers on the Electrical and Physical Properties of Resin Epoxy
|
|
2020 |
|
|
|
[12]
|
Impact of synergism of LDH with PNCC on the thermal and mechanical properties of polyester nanocomposites
|
|
2019 |
|
|
|
[13]
|
Investigation on the mechanical, thermal propertiesof polyamide 6/polypropylene blends with natural talc as filler
|
|
2019 |
|
|
|
[14]
|
Experimental and Theoretical Investigation of the Physical Properties of new Composite Materials
|
|
2018 |
|
|
|
[15]
|
EFFECT OF SILANIZED ZIRCONIA ON SOME MECHANICAL PROPERTIES OF HEAT-POLYMERIZED POLY METHYL-METHACRYLATE DENTURE BASE MATERIAL
|
|
Egyptian dental journal,
2018 |
|
|
|
[16]
|
Prediction, evaluation and mechanism governing interphase strength in tensile fractured PA-6/MWCNT nanocomposites
|
|
Composites Part A: Applied Science and Manufacturing,
2018 |
|
|
|
[17]
|
Evaluation the Mechanical Properties of Kaolin Particulate Reinforced Epoxy Composites
|
|
2018 |
|
|
|
[18]
|
Mechanical Properties Of Composite Materials Reinforced With Short Random Glass Fibers And Ceramics Particles
|
|
International Journal of Scientific & Technology Research,
2018 |
|
|
|
[19]
|
Mechanical properties of composite materials reinforced with short random glass fibers and ceramic particles
|
|
2018 |
|
|
|
[20]
|
EFFECT OF SILANIZED ZIRCONIA ON SOME MECHANICAL PROPERTIE S OF HEAT-POLYMERIZED POLY METHYLMETHACRYLATE DENTURE BASE …
|
|
2018 |
|
|
|
[21]
|
Use of modified fly ash as a nucleating agent for semi crystalline polyamide
|
|
IJARIIE,
2018 |
|
|
|
[22]
|
The Effect of Some Fillers on the Residue Weight of Novolac-Epoxy Hybride Composites
|
|
Journal of Kufa-Physics,
2018 |
|
|
|
[23]
|
The Rheological Effect of SiO2 Nanoparticles Additives for NBR/CR Blends
|
|
Journal of Catalyst and Catalysis,
2017 |
|
|
|
[24]
|
Morphology, thermal, mechanical and electrical insulation properties of poly (4-methyl-1-pentene)/poly (ethylene-co-vinyl alcohol)-coated TiO 2 nanocomposites
|
|
Composites Part B: Engineering,
2017 |
|
|
|
[25]
|
Wear and mechanical properties of Nylon 66–Al2O3 microcomposite
|
|
Journal of Reinforced Plastics and Composites,
2017 |
|
|
|
[26]
|
Sustainable biocomposites from biobased polyamide 6, 10 and biocarbon from pyrolyzed miscanthus fibers
|
|
Journal of applied polymer science,
2017 |
|
|
|
[27]
|
Rheological and thermal properties of exfoliated graphite nanoplatelets‐filled impact modified polypropylene nanocomposites
|
|
Polymer Composites,
2017 |
|
|
|
[28]
|
Impact of Bis-(3-triethoxysilylpropyl) tetrasulphide on the properties of PMMA/Cellulose composite
|
|
Polymer,
2017 |
|
|
|
[29]
|
Characterization of new Functionalized Calcium Carbonate-Polycaprolactone Composite Material for Application in Geometry-constrained Drug Release Formulation …
|
|
Drug Development and Industrial Pharmacy,
2017 |
|
|
|
[30]
|
Design And Development Of Dielectric Elastomers And Elimination Of Electromechanical Instability Under Equi-Biaxial Loading.
|
|
2016 |
|
|
|
[31]
|
Viscosity of chitosan/montmorillonite mixtures for coatings on paperboard packages
|
|
2016 |
|
|
|
[32]
|
Investigation of Characterization and Mechanical Performances of Al2O3 and SiC Reinforced PA6 Hybrid Composites
|
|
Journal of Inorganic and Organometallic Polymers and Materials,
2016 |
|
|
|
[33]
|
KETAHANAN KOROSI LAPISAN KOMPOSIT PANI/CaCO3 DALAM LINGKUNGAN GEOTERMAL
|
|
2016 |
|
|
|
[34]
|
Experimental Study on the Effect of Nano-Structured Aluminum Powder on the Properties
|
|
2016 |
|
|
|
[35]
|
مطالعه تجربی اثر پودر آلومینیوم نانو ساختار بر خواص یک PBX پایه HMX
|
|
2016 |
|
|
|
[36]
|
Tensile and Compressive Properties of Kaolin Rienforced Epoxy
|
|
Al-Khwarizmi Engineering Journal,
2015 |
|
|
|
[37]
|
Study on Effect of Wollastonite on the Thermal Properties of Nylon-6 and Morphological Analysis
|
|
2015 |
|
|
|
[38]
|
Development of Polymer Composite Based Enabling Technologies for Lab-on-a-Chip Devices
|
|
2015 |
|
|
|
[39]
|
Effect of Untreated Wollastonite on Mechanical Properties of Nylon6
|
|
International Journal on Recent and Innovation Trends in Computing and Communication,
2015 |
|
|
|
[40]
|
Studies on Physical and Mechanical Properties of Silica Fume-Filled Nylon 66 Polymer Composites for Mechanical Components
|
|
Polymers & Polymer Composites,
2015 |
|
|
|
[41]
|
Development of Mold Compounds With Ultralow Coefficient of Thermal Expansion and High Glass Transition Temperature for Fan-Out Wafer-Level Packaging
|
|
2015 |
|
|
|
[42]
|
EFFECTIVE UTILIZATION OF INDUSTRIAL WASTE (FLYASH) TO ENHANCE THE PROPERTIES OF POLYMER COMPOSITES FOR MECHANICAL COMPONENTS
|
|
2015 |
|
|
|
[43]
|
ردوپ رثا یبرجت هعلاطم راتخاس ونان موینیمولآ صاوخ رب کی
|
|
2015 |
|
|
|
[44]
|
Evaluation of Thermal and Morphological Properties of Nylon 6/Cenosphere Composites
|
|
International Journal on Recent and Innovation Trends in Computing and Communication,
2015 |
|
|
|
[45]
|
Improving the electromechanical performance of dielectric elastomers using silicone rubber and dopamine coated barium titanate
|
|
Materials & Design,
2015 |
|
|
|
[46]
|
Characterization of Polyester Base-K^ sub 2^ CO^ sub 3^ Composite Used for Biomedical Applications
|
|
Journal of King Abdulaziz University,
2014 |
|
|
|
[47]
|
Thermal, mechanical and tribological performance of polymer composites rubbed against polymer composites in application in electrical contact breakers
|
|
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology,
2014 |
|
|
|
[48]
|
The comparison of properties of (rubber tree seed shell flour)‐filled polypropylene and high‐density polyethylene composites
|
|
Journal of Vinyl and Additive Technology,
2014 |
|
|
|
[49]
|
Studies on effect of titanate-coupling agent (0.5, 1.5, and 2.5%) on the mechanical, thermal, and morphological properties of fly ash–filled polypropylene composites
|
|
Journal of Thermoplastic Composite Materials ,
2014 |
|
|
|
[50]
|
Properties of Rubber Seed Shell Flour-Filled Polypropylene Composites: The Effect of Poly (ethylene co-Acrylic Acid)
|
|
BioResources,
2014 |
|
|
|
[51]
|
Effect Alkaline Additive to Polyester-based Composite for Biomedical Applications
|
|
International Journal of Science and Research,
2014 |
|
|
|
[52]
|
Characterization of Polyester Base-K2co3 Composite Used for Biomedical Applications= دراسة خصائص متراكبة ذات أساس من البوليستر-K2CO3 و المستخدم في …
|
|
2014 |
|
|
|
[53]
|
Characterization of Polyester Base-K2co3 Composite Used for Biomedical Applications= دراسة خصائص متراكبة ذات أساس من البوليستر-K2CO3 و المستخدم في …
|
|
2014 |
|
|
|
[54]
|
Characterization of Polyester Base-K2CO3 Composite Used for Biomedical Applications.
|
|
2014 |
|
|
|
[55]
|
Characterization of Polyester Base-K2CO3 Composite Used for Biomedical Applications
|
|
2014 |
|
|
|
[56]
|
Pomza partikül takviyeli polimer matrisli kompozitlerin üretimi ve erozif aşınma davranışının incelenmesi
|
|
2013 |
|
|
|
[57]
|
WATER ABSORPTION, FLAMMABILITY AND MECHANICAL PROPERTIES OF LINEAR LOW DENSITY POLYETHYLENE/EGG SHELL COMPOSITE
|
|
NULL
2013 |
|
|
|
[58]
|
Melt molding polymer composite and method of making and using the same
|
|
US Patent 8,487,034,
2013 |
|
|
|
[59]
|
Tribological Performance of Polymer Composites used in Electrical Engineering Applications
|
|
Journal of Polymer Engineering,
2013 |
|
|
|
[60]
|
FLEXURAL PROPERTIES OF CALCIUM META SILICATE REINFORCED POLYAMIDES
|
|
MV Kulkarni, K Elangovan, KH Reddy, AS Bhide,
2013 |
|
|
|
[61]
|
The formulation and study of the thermal stability and mechanical properties of an acrylic coating using chicken eggshell as a novel bio-filler
|
|
Progress in Organic Coatings ,
2013 |
|
|
|
[62]
|
Studies on the effect of maleic anhydride–grafted polypropylene with different MFI on mechanical, thermal and morphological properties of fly ash-filled PP composites
|
|
Journal of Thermoplastic Composite Materials,
2013 |
|
|
|
[63]
|
A Study on the Influence of Compatibilizer and Mica Filler on the Properties of Thermoplastic Polyurethane/Polyolefins Blends
|
|
NULL
2013 |
|
|
|
[64]
|
Mechanical and morphological properties of mica and short glass fiber reinforced polyamide 6 composites
|
|
International Journal of Polymeric Materials,
2012 |
|
|
|
[65]
|
A Study of the Effect of Iraqi Bentonite on Some Properties of Polymeric Blend
|
|
NJ Saleh, MA Muslim - uotechnology.edu.iq,
2012 |
|
|
|
[66]
|
Effect of Methyl Methacrylate–Acrylonitrile-Butadiene–Styrene (MABS) on the Mechanical and Thermal Properties of Poly (Methyl Methacrylate)(PMMA)-Fly Ash Cenospheres (FAC) Filled Composites
|
|
Journal of Minerals and Materials Characterization and Engineering,
2012 |
|
|
|
[67]
|
Effect of methyl methacrylate–acrylonitrile-butadiene–styrene (MABS) on the mechanical and thermal properties of poly (Methyl Methacrylate)(PMMA)-fly ash …
|
|
2012 |
|
|
|
[68]
|
Mechanical And Thermal Properties Of Nanoparticles Filled Silicone Rubber Composites
|
|
2012 |
|
|
|
[69]
|
Flexural and Hardness Testing on ABS and Glass Fiber Reinforced Nylon6
|
|
2011 |
|
|
|
[70]
|
Characterization of ceramic filled polymer matrix composite used for biomedical applications
|
|
Journal of Minerals and Materials Characterization and Engineering,
2011 |
|
|
|
[71]
|
Effects of mica and fly ash concentration on the properties of polyester thermoplastic elastomer composites
|
|
Journal of Thermoplastic Composite Materials,
2011 |
|
|
|
[72]
|
Effect of surface modification of fly ash reinforced in polyetheretherketone composites
|
|
Polymer Composites,
2011 |
|
|
|
[73]
|
Chemical modification of waste oil fly ash for improved mechanical and thermal properties of low density polyethylene composites
|
|
Journal of Polymer Research,
2011 |
|
|
|
[74]
|
Advanced hollow epoxy particle-filled composites
|
|
Journal of Composite Materials,
2011 |
|
|
|
[75]
|
Flexural properties of glass and graphite particles filled polymer composites
|
|
NULL
2011 |
|
|
|
[76]
|
Evaluation of thermal and dielectric behaviour of some anionic nylon 612 copolymers
|
|
Materials & Design,
2010 |
|
|
|
[77]
|
Anionic nylon 6/zinc composite materials: Evaluation of thermal and mechanical behavior
|
|
International Journal of Polymer Analysis and Characterization,
2010 |
|
|
|
[78]
|
Effect of Compatibilizers on Mechanical Thermal and Morphology Properties of HDPE/TiO2 Nanocomposites
|
|
Advanced Materials Research,
2010 |
|
|
|
[79]
|
EFFECT OF SIZES AND SHAPES OF ZINC OXIDE ON PROPERTIES OF POLYPROPYLENE WITH AND WITHOUT COMPATIBILIZER
|
|
NULL
2010 |
|
|
|
[80]
|
Effect of concentration of mica on properties of polyester thermoplastic elastomer composites
|
|
Journal of Minerals and Materials Characterization and Engineering,
2009 |
|
|
|
[81]
|
Influence of silicon carbide filler on mechanical and dielectric properties of glass fabric reinforced epoxy composites
|
|
Journal of applied polymer science,
2009 |
|
|
|
[82]
|
Preparation and characterization of polyaniline/CaCO3 composite and its application as anticorrosive coating on iron
|
|
Iranian Journal of Chemical Engineering,
2008 |
|
|
|
[83]
|
Effect of particle shape of silica mineral on the properties of epoxy composites
|
|
Composites Science and Technology,
2008 |
|
|
|
[84]
|
Modification of the dynamic damping behavior of fly ash filled unsaturated polyester resin/SBR latex blend composites
|
|
Journal of Reinforced Plastics and Composites,
2008 |
|
|
|
[85]
|
PREPARATION AND CHARACTERIZATION OF POLYANILINE/CACO3 COMPOSITE AND ITS APPLICATION AS ANTICORROSIVE COATING ON IRON (RESEARCH …
|
|
2008 |
|
|
|
[86]
|
Effect of silica and calcium carbonate fillers on the properties of woven glass fibre composites
|
|
Advanced Materials Research,
2007 |
|
|
|
[87]
|
Mechanical properties and processibilty of glass‐fiber‐, wollastonite‐, and fluoro‐rubber‐reinforced silicone rubber composites
|
|
Journal of applied polymer science,
2007 |
|
|
|
[88]
|
Effect of both uncoated and coated calcium carbonate on fracture toughness of HDPE/CaCO3 nanocomposites
|
|
Journal of Minerals and Materials Characterization and Engineering,
2007 |
|
|
|
[89]
|
Parametric study of tin-free antifouling model paint behavior using rotary experiments
|
|
Industrial & engineering chemistry research,
2006 |
|
|
|
[90]
|
Nylon 6/SiO2Nanocomposites Synthesized by in situAnionic Polymerization
|
|
High Performance Polymers,
2006 |
|
|
|
[91]
|
Effects of various fillers on CEM‐1 laminate punchability
|
|
Journal of applied polymer science,
2006 |
|
|
|
[92]
|
Effect of flyash on the mechanical, thermal, dielectric, rheological and morphological properties of filled nylon 6
|
|
Journal of Minerals and Materials Characterization and Engineering,
2004 |
|
|
|
[93]
|
Results in Materials
|
|
|
|
|