Open Journal of Metal

Volume 2, Issue 1 (March 2012)

ISSN Print: 2164-2761   ISSN Online: 2164-277X

Google-based Impact Factor: 0.22  Citations  

Thermal Stability of Ni-Fe Alloy Foils Continuously Electrodeposited in a Fluorborate Bath

HTML  Download Download as PDF (Size: 1862KB)  PP. 18-23  
DOI: 10.4236/ojmetal.2012.21003    6,888 Downloads   13,622 Views  Citations

ABSTRACT

Nanocrystalline Ni-Fe alloy foils were fabricated by using a continuous electrodeposition system, and then they were annealed at different temperatures ranging from room temperature to 650 ℃. A ductile-brittle-ductile evolution of these alloy foils was observed along with the increase of annealing temperature, and was affected by iron content. The first and second transformation took place at below 300 ℃ and over 500 ℃, respectively. Iron improved thermal stability of nanocrystalline Ni-Fe alloys. The XRD data indicated that for Ni100-xFex (x > 55) alloys bcc to fcc phase transformed at 300 ℃ and completely at 500℃.

Share and Cite:

W. Chang, Y. Wei, J. Guo and F. He, "Thermal Stability of Ni-Fe Alloy Foils Continuously Electrodeposited in a Fluorborate Bath," Open Journal of Metal, Vol. 2 No. 1, 2012, pp. 18-23. doi: 10.4236/ojmetal.2012.21003.

Cited by

[1] Periodic ultrasound-assisted electrodeposition of Fe–Ni alloy foil
Materials Research Bulletin, 2022
[2] Influence of ultrasonic in low thermal expansion Fe-Ni electrodeposition process for micro-electroforming
Ultrasonics Sonochemistry, 2022
[3] Effects of processing parameters and heat treatment on the microstructure and magnetic properties of the in-situ synthesized Fe-Ni permalloy produced using direct …
Journal of Alloys and …, 2022
[4] Experimental Research Regarding the Rolling Technology of the Fe-Ni Alloys
Archives of Metallurgy and Materials, 2022
[5] Keyword: iron-nickel; rolling technology; mechanical characteristics
2022
[6] Reducing the Internal Stress of Fe-Ni Magnetic Film Using the Electrochemical Method
Processes, 2021
[7] Catalysts by pyrolysis: Direct observation of chemical and morphological transformations leading to transition metal-nitrogen-carbon materials
2021
[8] Ni-Fe alloy nanostructured electrodes for water splitting in alkaline electrolyser
2021
[9] Thermal stability of nano-crystalline nickel electrodeposited into porous alumina
2020
[10] Correlation between the bath composition and nanoporosity of DC‐electrodeposited Ni‐Fe alloy
2020
[11] Steam reforming of ethylene over nickel based spinel oxides
2020
[12] Ultrasound-assisted electrodeposition of Fe-Ni film for OLED mask
Materials Research Bulletin, 2020
[13] Effect of Annealing on Hardness and Elastic Modulus of Invar36 Thin Films Deposited by Direct Current Sputtering for Strain Gauge Applications
… Journal of Thin Film …, 2019
[14] Studying the thermodynamic properties of composite magnetic material based on anodic alumina
2019
[15] Mechanical and fracture behaviour of the three-scale hierarchy structure in As-deposited and annealed nanocrystalline electrodeposited Ni–Fe alloys
2019
[16] Effect of Cobalt on the Nano-Mechanical and Magnetic Properties of Electroformed Fe–Ni–Co Thin Film
2019
[17] Magnetooptical response of permalloy multilayer structures on different substrate in the IR–VIS–UV spectral range
2019
[18] ДИАГНОСТИКА МАТЕРИАЛОВ
2019
[19] Novel NiFe/NiFe-LDH composites as competitive catalysts for clean energy purposes
Applied Surface Science, 2018
[20] Microstructure, texture and tensile behavior of pulsed electrodeposited Ni–Al composites produced using organic additive-free sulfamate bath loaded with Al …
Materials Characterization, 2018
[21] Basic research on electroforming of Fe–Ni shell with low thermal expansion
2018
[22] X-ray imaging of powder consolidation during laser additive manufacturing
2017
[23] Invar Electrodeposition for Controlled Expansion Interconnects
2017
[24] Effect of current density and pH in obtaining the Ni-Fe alloy by electrodeposition
2017
[25] Efeito da densidade de corrente e pH na obtenção da liga Ni-Fe por eletrodeposição
Revista Materia, 2017
[26] Electrodeposition of Ni–Fe alloys, composites, and nano coatings-A review
Journal of Alloys and Compounds, 2016
[27] Effect of microstructure of vacuum-deposited Fe100− xNix (30< x< 39) foils with FCC structure on their mechanical properties
Journal of Alloys and Compounds, 2015
[28] Effect of microstructure of vacuum-deposited Fe< sub> 100< sub>?< i> x Ni< i> x(30<< i> x< 39) foils with FCC structure on their mechanical properties
Journal of Alloys and Compounds, 2015
[29] Structure and Properties of Nanostructured Vacuum-Deposited Foils of Invar Fe–(35–38 wt%) Ni Alloys
Journal of Materials Science & Technology, 2015
[30] Structure and properties of electrodeposited functional Ni–Fe/TiN nanocomposite coatings
Surface and Coatings Technology, 2015
[31] Electrodeposition and electro-catalytic study of nanocrystalline Ni–Fe alloy
International Journal of Hydrogen Energy, 2014
[32] Effect of deposition conditions of Fe100 ? xNix (30 < x < 40) condensates on their structure
Surface and Coatings Technology, 2014
[33] Effect of deposition conditions of Fe100− xNix (30< x< 40) condensates on their structure
Surface and Coatings Technology, 2014
[34] Electrofabrication of multilayer Fe–Ni alloy coatings for better corrosion protection
Applied Physics A, 2014
[35] Effects of Production Parameters and Heat Treatment on the Microstructure and Magnetic Properties of The In-Situ Synthesized Fe-Ni Permalloy Produced Using …
[36] Vacancy-Pba Derived Nanoparticle Containing Defect-Rich Crystal Structure and P, S Dual-Doping as an Outstanding Oxygen Evolution Electrocatalyst

Journals Menu
Follow SCIRP
Contact us
+1 323-425-8868
customer@scirp.org
WhatsApp +86 18163351462(WhatsApp)
Click here to send a message to me 1655362766
Paper Publishing WeChat

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.