Author(s)

Nagwa Ibrahim Mohammed Ibrahim¹, Amnah Mohammed Elharbi², Abdulrahman Albadri³

¹Department of Physics, Science College, Qassim University, Buraydah, Saudi Arabia.
²Department of Physics, Science College, Al Baha University, Baha, Saudi Arabia.
³Microelectronics and Semiconductors Institute, King Abdulaziz City for Science and Technology, Riyadh, Saudi Arabia.

In this study, organic solar cells (OSCs) with an active layer, a blend of polymer of non-fullerene (NFA) Y6 as an acceptor, and donor PBDB-T-2F as donor were simulated through the one-dimensional solar capacitance simulator (SCAPS-1D) software to examine the performance of this type of organic polymer thin-film solar cell by varying the thickness of the active layer. PFN-Br interfacial layer entrenched in OPV devices gives overall enhanced open-circuit voltage, short-circuit current density and fill factor thus improving device performance. PEDOT: PSS is an electro-conductive polymer solution that has been extensively utilized in solar cell devices as a hole transport layer (HTL) due to its strong hole affinity, good thermal and mechanical stability, high work function, and high transparency in the visible range. The structure of the organic solar cell is ITO/PEDOT: PSS/BTP-4F: PBDB-T-2F/PFN-Br/Ag. Firstly, the active layer thickness was optimized to 100 nm; after that, the active-layer thickness was varied up to 900 nm. The results of these simulations demonstrated that the active layer thickness improves efficiency significantly up to 500 nm, then it decreased with increasing the thickness of the active layer from 600 nm, also notice that the short circuit current and the fill factor decrease with increasing the active layer from 600 nm, while the open voltage circuit increased with increasing the thickness of the active layer. The optimum thickness is 500 nm.

Organic Solar Cells, PEDOT:PSS, BTP-4F (Y6), PBDB-T-2F (PM6), PFN-Br, SCAPS 1D

Ibrahim, N. , Elharbi, A. and Albadri, A. (2024) Study the Effect of Thickness on the Performance of PM6:Y6 Organic Solar Using SCAPS Simulation. Advances in Materials Physics and Chemistry, 14, 55-65. doi: 10.4236/ampc.2024.144005.