Author(s)

Victor J. Law^*, Denis P. Dowling

School of Mechanical and Materials Engineering, University College Dublin, Dublin, Ireland.

This paper reviews three complex interactions between microwave energy and microorganisms (bacteria, fungi, and viruses). The first interaction comprises the detection of viruses within human blood using a 50-Ohm transmission-line vector net-analyzer (typically 0 to 10 dBm @ 2 to 8.5 GHz) where the blood is placed within a test chamber that acts as a non-50-Ohm discontinuity. The second interaction employs 1 to 6.5 W @ 8 to 26 GHz for microwave feed-horn illumination to inactivate microorganisms at an applied power density of 10 to 100 mW^-2. The third interaction is within multi-mode microwave ovens, where microorganism cell membrane disruption occurs at a few 100 s of W @ 2.45 GHz and microorganism inactivation between 300 to 1800 W @ 2.45 GHz. Within the first microwave interaction, blood relaxation processes are examined. Whereas in the latter two microwave interactions, the following disruption, and inactivation mechanisms are examined: chemical cellular lysis and, microwave resonant absorption causing cell wall rupture, and thermodynamic analysis in terms of process energy budget and suspension energy density. In addition, oven-specific parameters are discussed.

Bacteria, Fungi Virus, Hepatitis C Virus, Human Immunodeficiency Virus, Detection, Disruption Inactivation, N95 Respirator, Microwave Oven

Law, V. and Dowling, D. (2022) Microwave Detection, Disruption, and Inactivation of Microorganisms. American Journal of Analytical Chemistry, 13, 135-161. doi: 10.4236/ajac.2022.134010.