Malicious activities or policy violations have been a concern for the past years. For example, many people have been victims of robbery on vehicles. A conceptual diagram of an Intrusion Detection System (IDS) [
1] [
2] for vehicles with remote signaling using an Arduino controller and radio-frequency technology is proposed in this paper. To address malicious activities on vehicles, two aspects are considered here, namely: notifier and detector. Firstly, an object-oriented C module that puts on and off a controller (installed inside the vehicle) and an anti-theft electronic editing that powered using an alternator and supported by a back-up battery are implemented. Secondly, a magnetic intrusion sensor, controlled by a proximity detector using radio-frequency technology, has been installed on each vehicle door. To enable IDS, a user needs to activate the monitoring system when leaving their vehicle. This is done using a remote system. In case the user does not activate the monitoring system while leaving the vehicle, a 5-meter-proximity detector will automatically lock the system and set off the monitoring system whenever the user is outside the detection zone. The detection zone is a 5-meter radius area centered at the controller. Here, monitoring consists of geolocating any intruders within the detection zone. This means, if any of the vehicle doors is opened while the system is still locked, the controller will activate the vehicle alarm for a few seconds, thereafter send an SMS notification to the owner. The system automatically unlocks as soon as the proximity detector is within the detection zone. The contribution of this paper, as compared to other similar work, is to reinforce the electronic implementation of IDS.