Recycled, Bio-Based, and Blended Composite Materials for 3D Printing Filament: Pros and Cons

Journals Menu

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org

Google-based Impact Factor: 1.34
Citations

Journals Menu

"Recycled, Bio-Based, and Blended Composite Materials for 3D Printing Filament: Pros and Cons—A Review"
written by Khanh Q. Nguyen, Pascal Y. Vuillaume, Lei Hu, Jorge López-Beceiro, Patrice Cousin, Saïd Elkoun, Mathieu Robert,
published by Materials Sciences and Applications, Vol.14 No.3, 2023

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	3D Printable Multifunctional Electrochemical Nano‐Doped Biofilament
	Advanced Functional …, 2024

[2]	Effect of in situ thermal treatment on interlayer adhesion of 3D printed polyetherimide (PEI) parts produced by fused deposition modeling (FDM)
	Materials Today …, 2024

[3]	Advancements in precision agriculture: exploring the role of 3D printing in designing all-terrain vehicles for farming applications
	Int. J. Sci. Res., 2024

[4]	Use of high-performance polymeric materials in customized low-cost robotic grippers for biomechatronic applications: experimental and analytical research
	Frontiers in …, 2024

[5]	Influence of thermal treatment on surface roughness, microstructural, and mechanical properties of 3D printed ABS
	Material Forming …, 2024

[6]	Sustainable 3D printing with recycled materials: a review
	Journal of Mechanical …, 2023

[7]	Recycled PLA for 3D Printing: A Comparison of Recycled PLA Filaments from Waste of Different Origins after Repeated Cycles of Extrusion
	Carvajal, ÁH Muñoz, JJ Garrido-González… - Polymers, 2023

[8]	Novel and Accessible Physical Recycling for Expanded Polystyrene Waste with the Use of Acetone as a Solvent and Additive Manufacturing (Direct Ink-Write 3D …
	Sobrino, A Cortés, R Calderón-Villajos… - Polymers, 2023

[9]	The Education, Scholarships, Apprenticeships and Youth Entrepreneurship EUROPEAN NETWORK FOR 3DPRINTING OF BIOMIMETIC MECHATRONIC …

[1]	Vibration response on the rod of vortex bladeless wind power generator for a sandwich beam with various face sheets and cores based on different boundary conditions Mechanics Based Design of Structures and Machines, 2025 DOI:10.1080/15397734.2024.2391920

[2]	Comprehensive Green Materials 2025 DOI:10.1016/B978-0-443-15738-7.00068-4

[3]	Effect of in situ thermal treatment on interlayer adhesion of 3D printed polyetherimide (PEI) parts produced by fused deposition modeling (FDM) Materials Today Communications, 2024 DOI:10.1016/j.mtcomm.2024.108588

[4]	Use of high-performance polymeric materials in customized low-cost robotic grippers for biomechatronic applications: experimental and analytical research Frontiers in Materials, 2024 DOI:10.3389/fmats.2024.1304339

[5]	Effect of in situ thermal treatment on interlayer adhesion of 3D printed polyetherimide (PEI) parts produced by fused deposition modeling (FDM) Materials Today Communications, 2024 DOI:10.1016/j.mtcomm.2024.108588

[6]	Fabrication of three‐dimensional micropatterned hydrophobic surfaces by fused filament fabrication printing technology Applied Research, 2024 DOI:10.1002/appl.202400003

[7]	Vibration response on the rod of vortex bladeless wind power generator for a sandwich beam with various face sheets and cores based on different boundary conditions Mechanics Based Design of Structures and Machines, 2024 DOI:10.1080/15397734.2024.2391920

[8]	Effect of in situ thermal treatment on ABS parts produced by fused deposition modeling (FDM) The International Journal of Advanced Manufacturing Technology, 2024 DOI:10.1007/s00170-024-14656-8

[9]	Fabrication of three‐dimensional micropatterned hydrophobic surfaces by fused filament fabrication printing technology Applied Research, 2024 DOI:10.1002/appl.202400003

[10]	Sustainable 3D printing with recycled materials: a review Journal of Mechanical Science and Technology, 2023 DOI:10.1007/s12206-023-1001-9

Follow SCIRP

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

Materials Sciences and Applications

Journals Menu

Home

About SCIRP

Service

Policies