The Comparison of the Mechanical Characteristics of ABS Using Three Different Plastic Production Techniques

Journals Menu

Follow SCIRP

ISSN Print: 2333-9705
ISSN Online: 2333-9721
www.scirp.org/journal/oalibj
E-mail: service@oalib.com

Citations

"The Comparison of the Mechanical Characteristics of ABS Using Three Different Plastic Production Techniques"
written by Yousuf Pasha Shaik, Naresh Kumar Naidu, Venkat Reddy Yadavalli, Manish Reddy Muthyala,
published by Open Access Library Journal, Vol.10 No.5, 2023

has been cited by the following article(s):

[1]	Unveiling the physico‐mechanical properties of kenaf yarn fiber‐reinforced acrylonitrile butadiene styrene composites: Effect of quasi‐isotropic lay‐up sequences
	Polymer …, 2024

[2]	Review and Assessment of Existing and Future Techniques for Traceability with Particular Focus on Applicability to ABS Plastics
	Polymers, 2024

[3]	Effect of ABS Content on Thermal Stability, Tensile Strength, Friction, and Wear of PMMA/ABS blends
	Journal of Materials, 2024

[4]	FDM 3D-Print on Thermoplastic Polyurethane (TPU) with Different Process Parameters Using Gyroid and Zigzag Infill Patterns
	Open Access Library Journal, 2024

[1]	Transforming orthodontic retention: potential of 3D printing and biocompatible material characteristics Journal of Medical Engineering & Technology, 2025 DOI:10.1080/03091902.2025.2466198

[2]	Review and Assessment of Existing and Future Techniques for Traceability with Particular Focus on Applicability to ABS Plastics Polymers, 2024 DOI:10.3390/polym16101343

[3]	Unveiling the physico‐mechanical properties of kenaf yarn fiber‐reinforced acrylonitrile butadiene styrene composites: Effect of quasi‐isotropic lay‐up sequences Polymer Composites, 2024 DOI:10.1002/pc.28414

[4]	Influence of 3D Printing on the Elastic Properties of ABS Polymer Filament Samples Акустический журнал, 2024 DOI:10.31857/S0320791924020039

[5]	Multiparameter Fiber Bragg Grating (FBG)-Based Sensor Fabricated Using 3-D Printing Technology for Precise Measurement of Vertical Earth and Pore Pressure IEEE Sensors Journal, 2024 DOI:10.1109/JSEN.2024.3424403

[6]	Influence of 3D Printing on the Elastic Properties of ABS Polymer Filament Samples Akustičeskij žurnal, 2024 DOI:10.31857/S0320791924020039

Follow SCIRP