Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Studies on Mechanical Characterization of Polypropylene/Na+-MMT Nanocomposites"
written by V. Selvakumar, K. Palanikumar, K. Palanivelu,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.8, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Synthesis and characterization of novel SEBS-g-MA/OMMT nanocomposites with thermal and mechanical resilience
Chemical Papers, 2024
[2] Optimization of Mechanical and Morphological Properties of Polypropylene Reinforced with Natural Rubber-Perlite Nanoparticles Using Response Surface …
… of Metallurgical & …, 2023
[3] Comparative study on mechanical, thermal, and morphological properties of nanocomposites based on polyetherimide (PEI)/silicone rubber reinforced with different …
Polymer Bulletin, 2023
[4] بهینه سازی خواص مکانیکی و ساختاری پلی پروپیلن تقویت شده با ترکیب لاستیک طبیعی-نانوذرات پرلیت با استفاده از روش سطح پاسخ‎
مهندسی متالورژی و مواد, 2023
[5] An experimental investigation on mechanical properties of Fe2O3 microparticles reinforced polypropylene
Journal of Materials …, 2022
[6] Novel Ternary Epoxy Resin Composites Obtained by Blending Graphene Oxide and Polypropylene Fillers: An Avenue for the Enhancement of Mechanical …
Journal of Inorganic and …, 2022
[7] Evaluation of the effect of nanomaterials and fibers on the mechanical behavior of polymer-based nanocomposites using Box–Behnken response surface …
Polymer Bulletin, 2022
[8] Experimental study of tensile and impact mechanical properties in polymer-based hybrid nanocomposites by response surface methodology
Journal of Aeronautical …, 2022
[9] بررسی تجربی خواص مکانیکی کشش و ضربه در نانوکامپوزیت‌های هیبریدی پایه پلیمری به روش رویه پاسخ‎
نشریه علمی پژوهشی مهندسی …, 2022
[10] State-of-the-Art nanoclay reinforcement in green polymeric nanocomposite: From design to new opportunities
Minerals, 2022
[11] A study on the nanoparticle emissions into environment during mechanical drilling of polyester, polypropylene, and epoxy nanocomposite materials
… Environmental Safety of …, 2021
[12] The impacts of climate change in relation to plastic waste on the Umgeni River system.
2021
[13] Biocomposites of Epoxidized Natural Rubber/Poly (lactic acid) Modified with Natural Fillers (Part I)
2021
[14] Polymer Nanocomposites: Polymer Composites: Design, Manufacturing, and Applications
Polymer-Based Composites, 2021
[15] Anticorrosion activities of polymethacrylic acid and grafted/modified polymethacrylic acid on pure aluminium in acid medium
2021
[16] Preparation and characterization of Ni0. 5Zn0. 5Co0. 2Fe1. 8O4 filled polypropylene composites
2021
[17] An experimental study on the effect of nanomaterials and fibers on the mechanical properties of polymer composites
Buildings, 2021
[18] Low-Temperature Thermal Degradation of Disinfected COVID-19 Non-Woven Polypropylene—Based Isolation Gown Wastes into Carbonaceous Char
Polymers, 2021
[19] An Experimental Study on the Effect of Nanomaterials and Fibers on the Mechanical Properties of Polymer Composites. Buildings 2022, 12, 7
2021
[20] Predicting the Tensile Properties of Recycled Polypropylene (r-PP)/Mengkuang Leaf Fibre (MLF) Composite using Mathematical Modelling
2020
[21] Experimental analysis of tensile properties nanocomposites based on polypropylene/Carboxylated Nitrile Rubber/Silica nano powder by using response surface …
2019
[22] Mechanical and Thermal Properties of Polypropylene/Silica Aerogel Composites
2019
[23] Synthesis of Montmorillonite Nanoclay Reinforced Chitin-cellulose Nanocomposite Film
2019
[24] Nano Indendation Hardness Testing Of PP-CNT Composites
2019
[25] Mechanical and Dynamic Properties of Basalt Fiber-Reinforced Composites with Nanoclay Particles
2019
[26] Optimization of Mechanical Properties of trinary Nanocomposites Based on Polypropylene/Nitrile Rubber/Silica Nano-Powder by Using Response Surface …
2019
[27] بهینه سازی خواص مکانیکی نانو کامپوزیت‌های سه تایی بر پایه پلی پروپیلن/لاستیک نیتریل/نانوپودر سیلیکا به روش رویه پاسخ‎
2019
[28] Optimization of Mechanical Properties of trinary Nanocomposites Based on Polypropylene/Nitrile Rubber /Silica Nano-Powder by Using Response Surface methodology
2018
[29] Correlation between morphology, deformation behavior and filler dimensionality of polyolefin elastomer based nanocomposites
2018
[30] An investigation of titanium dioxide nanoparticles effect on the impact strength, tensile strength and elastic modulus of polypropylene/linear low density …
2018
[31] Preparation and properties of nanocomposites based on polyetherimide (PEI)/silicone rubber reinforced with halloysite nanotubes
2018
[32] A study on effect of titanium dioxide nanoparticles on the elastic modulus, impact and tensile strengths of polypropylene/linear low density polyethylene (PP/LLDPE) …
2018
[33] Introduction of polymer-based nanocomposites
Polymer-based Nanocomposites for Energy and Environmental Applications, 2018
[34] ENVIRONMENTAL DEGRADATION OF DURIAN SKIN NANOFIBRE BIOCOMPOSITE
2018
[35] "An investigation of titanium dioxide nanoparticles effect on the impact strength, tensile strength and elastic modulus of polypropylene/linear low density polyethylene (PP/LLDPE) blends"
Journal of Science and Technology of Composites, 2018
[36] Mechanical properties of kenaf fiber and montmorillonite reinforced recycled polyethylene terephthalate/recycled polypropylene
Materials Today: Proceedings, 2018
[37] بررسی تاثیر نانو ذرات اکسید تیتانیوم بر استحکام ضربه، استحکام کششی و مدول الاستیک ترکیبات پایه پلی پروپیلن/پلی اتیلن خطی با چگالی کم‎
2018
[38] A study on effect of titanium dioxide nanoparticles on the elastic modulus, impact and tensile strengths of polypropylene/linear low density polyethylene …
… of science and …, 2018
[39] Environmental Particle Emissions due to Automated Drillingof Polypropylene Composites and Nanocomposites Reinforcedwith Talc, Montmorillonite and Wollastonite
IOP Conference Series: Materials Science and Engineering, 2017
[40] Investigation of The Mechanical and Thermal Properties of Graphene Oxide Filled Polypropylene Composites
Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi, 2017
[41] Grafen Oksit Katkılı Polipropilen Polimer Kompozitlerin Mekanik ve Termal Özelliklerin İncelenmesi
Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi, 2017
[42] Investigation of Polypropylene-Montmorillonite Clay Nanocomposite Films Containing a Pro-degradant Additive
Journal of Polymers and the Environment, 2017
[43] بررسی تاثیر نانو ذرات اکسید تیتانیوم بر استحکام ضربه، استحکام کششی و مدول الاستیک ترکیبات پایه پلی‌پروپیلن/پلی‌اتیلن خطی با چگالی کم‎
2017
[44] Polimerik Malzemelerin Darbe Dayanımına Nano Katkıların Etkisi
2017
[45] Environmental Particle Emissions due to Automated Drilling of Polypropylene Composites and Nanocomposites Reinforced with Talc, Montmorillonite and …
IOP Conference Series: Materials Science and Engineering, 2017
[46] Tube-like natural halloysite/poly (tetrafluoroethylene) nanocomposites: simultaneous enhancement in thermal and mechanical properties
Materials Research Express, 2017
[47] بررسی خواص مکانیکی نانو کامپوزیت‌های سه تایی پلی‌پروپیلن-پلی اتیلن خطی چگالی پایین-نانو ذرات اکسید تیتانیوم به کمک روش رویه پاسخ‎
2017
[48] Mechanical Properties of Nanocomposites Based on Polypropylene-linear Low Density Polyethylene-titanium Dioxide Nano Particles by Response …
journal of Tabriz mechanical …, 2017
[49] Environmental Particle Emissions due to Automated Drilling of Polypropylene Composites and Nanocomposites Reinforced with Talc, Montmorillonite and …
2017
[50] Morphology and mechanical properties of polypropylene/ethylene acrylic acid/maleic anhybride-grafted polypropylene/organoclay nanocomposites: The role of …
2017
[51] Discussion of the definition of building contracting in Turkey in alegal framework
Bilecik ?eyh Edebali üniversitesi Fen Bilimleri Dergisi, 2017
[52] Experimental, analytical and numerical investigation of polypropylene nanocomposites microhardness
2016
[53] Deriving parameters of pressure-dependent yield surface for polymeric composites using kriging-based optimization method
Modares Mechanical Engineering, 2016
[54] بررسی تجربی، عددی و تحلیلی میکروسختی نانوکامپوزیت های پلی پروپیلن‎
علوم و فناوری کامپوزیت, 2016
[55] Optimization of mechanical properties of polypropylene/talc/graphene composites using response surface methodology
Polymer Testing, 2016
[56] Parametric Study of Injection Moulding Using Polypropylene H200mk Grade
INTERNATIONAL JOURNAL OF SCIENCE, 2016
[57] Deriving parameters of pressure-dependent yield surface for polymeric composites using kriging-based optimization method
2016
[58] MECHANICAL, THERMAL AND MORPHOLOGICAL STUDIES OF EPOXIDIZED PALM OIL/UNSATURATED POLYESTER/MONTMORILLONITE COMPOSITES
Thesis, 2016
[59] Predicting of mechanical properties of PP/LLDPE/TiO 2 nano-composites by response surface methodology
Composites Part B: Engineering, 2016
[60] تعیین پارامترهای سطح تسلیم وابسته به فشار برای کامپوزیت های پلیمری به روش بهینه سازی بر پایه مدل کریجینگ‎
مهندسی مکانیک مدرس, 2016
[61] Determination of the extended Drucker–Prager parameters using the surrogate-based optimization method for polypropylene nanocomposites
The Journal of Strain Analysis for Engineering Design, 2016
[62] Mechanical and thermo-mechanical properties of short carbon fiber reinforced polypropylene composites using exfoliated graphene nanoplatelets coating
Journal of Industrial and Engineering Chemistry, 2016
[63] Experimental and analytical investigations into the effects of inorganic filler on the polypropylene nanocomposite microhardness
Journal of Thermoplastic Composite Materials, 2016
[64] An investigation of TiO2 nanoparticles effect on morphology, thermal, and mechanical properties of epoxy/silica composites
Journal of Vinyl and Additive Technology, 2016
[65] Morphology and mechanical properties of polypropylene/ethylene acrylic acid/maleic anhybride-grafted polypropylene/organoclay nanocomposites The role of compatibilizers and organoclay content
Journal of Thermoplastic Composite Materials, 2015
[66] Mechanical, Thermal, and Microstructural Analysis of Polyvinyl Alcohol/Montmorillonite Nanocomposites
Journal of Nanomaterials, 2015
[67] Qin Tian1, 2, 3, 4, Shuhao Qin2, Fuzhong Wu1, Huixin Jin1
2015
[68] La conducta antisocial y los ambientes en los que se desarrolla: caso de los menores del centro especializado de readaptación y tratamiento para menores infractores no. 1 del Estado de Durango
2014
[69] Influencia de la criomolienda en la morfología y propiedades de materiales compuestos de polipropileno y organoarcillas
Ingenierías, 2014
[70] PP-g-MAH 对PP/OMMT 复合材料性能和结构的影响
工程塑料应用, 2014
[71] Influence of thermal conditions on the tensile properties of basalt fiber reinforced polypropylene–clay nanocomposites
Materials & Design, 2014
[72] In-situ nanomechanical studies of deformation and damage mechanisms in nanocomposites monitored using scanning electron microscopy
Materials Letters, 2014
[73] Strength Degradation of Mechanical Properties of Unidirectional E-Glass Fiber Epoxy Resin Nanoclay Composites under Hygrothermal Loading Conditions
Procedia Materials Science, 2014
[74] Reinforcing Effect of Montmorillonite Nanoclay on Mechanical Properties of High Density Polyethylene Nanocomposites
Applied Mechanics and Materials, 2014
[75] PE/Clay Nanocomposite with Bimodal Molecular Weight Distribution Produced Via In-Situ Polymerization
Journal of Inorganic and Organometallic Polymers and Materials, 2014
[76] Effect of cloisite 30B on the thermal and tensile behavior of poly (butylene adipate-co-terephthalate)/poly (vinyl chloride) nanoblends
Polymer Bulletin, 2014
[77] Mechanical Properties of Nanocomposites Based on Polypropylene-linear Low Density Polyethylene-titanium Dioxide Nano Particles by Response Surface Methodology
2014
[78] FACULTAD DE INGENIERÍA MECÁNICA Y ELÉCTRICA DIVISIÓN DE ESTUDIOS DE POSTGRADO
2013
[79] PE/clay nanocomposites produced via in situ polymerization by highly active clay-supported Ziegler–Natta catalyst
Polymer bulletin, 2013
[80] FACULTAD DE INGENIERÍA MECÁNICA Y ELÉCTRICA DIVISIÓN DE ESTUDIOS DE POSGRADO
2013
[81] Polylactic acid/polycaprolactone nanocomposite: Influence of montmorillonite and impact modifier on mechanical, thermal, and morphological properties
Journal of Elastomers and Plastics, 2013
[82] Fusion level optimization of rigid PVC nanocompounds by using response surface methodology
Journal of Vinyl and Additive Technology, 2013
[83] A study on some properties of polypropylene based nanocomposites made using almond shell flour and organoclay
Asian Journal of Chemistry, 2013
[84] Effect of montmorillonoite modification and maleic anhydride‐grafted polypropylene on the microstructure and mechanical properties of polypropylene …
Journal of applied polymer science, 2013
[85] Оптимизация механических свойств композитных материалов c использованием нанотрубок и волокон
2012
[86] An Investigation of Thermal, Physical, and Electrical Properties and Morphological Behavior on Nanoepoxy Composite Insulation
Nanotechnology, IEEE Transactions on, 2012
[87] Efecto de la criomolienda sobre la morfología y propiedades de materiales compuestos de polipropileno con organoarcillas
2012
[88] Проведение экспериментальных исследований
ИМ Кузяев
Free SCIRP Newsletters
Copyright © 2006-2025 Scientific Research Publishing Inc. All Rights Reserved.
Top