[1]
|
Highly efficient ultrasonic-assisted preconcentration of trace amounts of Ag (I), Pb (II), and Cd (II) ions using 3-mercaptopropyl trimethoxysilane-functionalized …
|
|
2021 |
|
|
[2]
|
Influence of CeO2 reinforcement on Microstructure, Mechanical and Wear Behaviour of AA2219 squeeze cast composites
|
|
2021 |
|
|
[3]
|
Influence of CeO2 reinforcement on Microstructure, Mechanical and Wear Behaviour of AA2219 squeeze cast composit
|
|
Journal of Materials Research and Technology,
2021 |
|
|
[4]
|
Slip band formation in low and high solute aluminum: a combined experimental and modeling study
|
|
… and Simulation in …,
2021 |
|
|
[5]
|
Experimental investigation of hot tensile properties of Al-8Si-0.4 Mg alloy with varying Ni addition
|
|
2020 |
|
|
[6]
|
Green and facile synthesis of water-soluble carbon dots from ethanolic shallot extract for chromium ion sensing in milk, fruit juices, and wastewater samples
|
|
2020 |
|
|
[7]
|
Wear Behavioral and Mechanical Studies on Liquid Forged VAL12 Alloy Strengthened by Lanthanum Oxide Dispersoids
|
|
2020 |
|
|
[8]
|
Tailored VAL12 alloy with La2O3 dispersoids and their effect on microstructural and mechanical properties
|
|
2020 |
|
|
[9]
|
Microstructural and mechanical properties elucidation on VAL12 aerospace alloy tailored with La2O3 dispersoids fabricated by squeeze casting technique for …
|
|
2020 |
|
|
[10]
|
Karakterizacija zlitin Al-Zn-Mg-Cu
|
|
2020 |
|
|
[11]
|
Role of Sintering, Co-particles on Properties of Milled Al-Zn-Mg-Cu Matrix Produced via PM
|
|
2018 |
|
|
[12]
|
Effect of Si Addition on Microstructure and Tribological Properties of Al-0.1 Mg-0.35 Ni-(4, 6, 8, 10) wt% Si Alloy
|
|
2017 |
|
|
[13]
|
Preiskava nastajanja vročih razpok pri zlitinah Al-Zn
|
|
2017 |
|
|
[14]
|
Two Step and Regression Re-aging Heat Treatment of Al-5.2% Zn-2.3% Mg Alloy Applied in Cigarette Making Machines
|
|
2016 |
|
|
[15]
|
Correlation between mechanical properties of selected 7xxx series aluminum alloys obtained by semi-continuous casting
|
|
Metallurgy and Foundry Engineering,
2016 |
|
|
[16]
|
Assessment of retrogression and re-aging treatment on microstructural and mechanical properties of Al-Zn-Mg-Cu P/M alloy
|
|
INTERNATIONAL CONFERENCE ON MATHEMATICS, ENGINEERING AND INDUSTRIAL APPLICATIONS 2014 (ICoMEIA 2014),
2015 |
|
|
[17]
|
EFFECT OF Al 2 O 3 PARTICULATES ON THE PROPERTIES OF THE SINTERED Al-Zn-Mg-Cu-Ni-Co ALLOY AFTER T6 AND RRA TREATMENTS.
|
|
Digest Journal of Nanomaterials & Biostructures (DJNB),
2015 |
|
|
[18]
|
Effect of friction stir processing on the microstructure and hardness of an aluminum-zinc-magnesium-copper alloy with nickel additives
|
|
The Physics of Metals and Metallography,
2015 |
|
|
[19]
|
Effects of Be, Sr, Fe and Mg interactions on the microstructure and mechanical properties of aluminum based aeronautical alloys
|
|
2015 |
|
|
[20]
|
EFFECT OF Al2O3 PARTICULATES ON THE PROPERTIES OF THE SINTERED Al-Zn-Mg-Cu-Ni-Co ALLOY AFTER T6 AND RRA TREATMENTS.
|
|
Digest Journal of …,
2015 |
|
|
[21]
|
Influence cobalt on microstructural and hardness property of Al-Zn-Mg-Cu-Fe-Cr-Ni P/M alloys
|
|
AIP Conference Proceedings,
2015 |
|
|
[22]
|
Characteristics of Al-Zn-Mg-Cu Alloys with Nickel Additives Synthesized via Mechanical Alloying, Cold Compaction, and Heat Treatment.
|
|
Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ),
2014 |
|
|
[23]
|
Characteristics of Al–Zn–Mg–Cu Alloys with Nickel Additives Synthesized via Mechanical Alloying, Cold Compaction, and Heat Treatment
|
|
NULL
2014 |
|
|
[24]
|
EFFECTIVENESS OF ALUMINA DISPERSOIDS PARTICLES WITHIN (7XXX SERIES) ALUMINUM ALLOY UNDER THE RETROGRESSION AND REAGING TREATMENTS
|
|
Digest Journal of Nanomaterials & Biostructures ,
2014 |
|
|
[25]
|
EFFECTIVENESS OF ALUMINA DISPERSOIDS PARTICLES WITHIN (7XXX SERIES) ALUMINUM ALLOY UNDER THE RETROGRESSION AND REAGING …
|
|
2014 |
|
|