Effect of Silicon Additions on the Wear Properties of Grey Cast Iron

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org

Google-based Impact Factor: 1
Citations h5-index & Ranking*

Journals Menu

"Effect of Silicon Additions on the Wear Properties of Grey Cast Iron"
written by Johnson O. Agunsoye, Talabi S. Isaac, Olumuyiwa I. Awe, Afemefuna T. Onwuegbuzie,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.2, 2013

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Effect of Prosopis Juliflora Thorns on Mechanical Properties of Plastic Waste Reinforced Epoxy Composites
	Polymers, 2022

[2]	Effect of Detonation-Sprayed Cr3C2 and Ni–Cr Coatings on Performance Properties of Gray Cast Iron Gears
	Metal Science and Heat Treatment, 2022

[3]	Machinability of high strength molybdenum-refined graphite grey cast iron and conventional vermicular automobile engine heads using heptagonal and double …
	2022

[4]	Влияние покрытий из карбида хрома Cr 3 C 2 и Ni-Cr-сплава, полученных детонационным напылением, на эксплуатационные свойства зубчатых шестерен …
	Металловедение и термическая …, 2022

[5]	Intermetallic Phases in Alloyed Cast Iron with 18% Si Addition
	2020

[6]	Development microstructural characteristics and properties of carbidic ductile cast iron
	2020

[7]	Effect of silicon addition on microstructure and mechanical properties of grey cast Iron: An overview
	2020

[8]	Electrochemical study and gravimetric behaviour of gray cast iron in varying concentrations of blends as alternative material for gears in ethanol environment
	2020

[9]	Influence of S and Mn on mechanical properties and microstructure of grey cast iron: An overview
	2020

[10]	Internal Cracks and Non-Metallic Inclusions as Root Causes of Casting Failure in Sugar Mill Roller Shafts
	2019

[11]	Fundición aleada para la fabricación de tamboras de automóvil
	2019

[12]	Разработка технологии изготовления деталей/компонентов двигателя внутреннего сгорания с применением аддитивных методов производства
	2019

[13]	Karakteristik Lelah Besi Cor Kelabu Terhadap Hasil Penambahan Silisium Melalui Metode Open Ladle
	Prosiding Seminar Nasional Sains …, 2019

[14]	Model development for estimating the aging behaviors of gray cast iron (GCI) alloy at different times and temperatures.
	2018

[15]	The Effects of Silicon on The Hardness and Wear of Ferritic Grey Cast Iron on Shoe Brake of Train
	IOP Conference Series …, 2018

[16]	Study The Wear Properties of Al-Cr-Mo Grey Cast Iron Alloys Produced For Metal Cutting Tools Application
	2018

[17]	Model development for estimating the aging behaviors of gray cast iron (GCI) alloy at different times and temperatures
	The International Journal of Advanced Manufacturing Technology, 2018

[18]	Comportamiento de las propiedades mecánicas de la aleación ИЧ XH 4 para emplearla en molinos de bolas
	2018

[19]	Caracterización metalográfica y mecánica de una fundición aleada para ser empleada en la industria del transporte
	2018

[20]	Caracterización de la fundición x28h2 en bruto de colada empleada en la fabricación de impelentes de bombas warman
	2018

[21]	Wear Behaviour of Low Alloy Grey Cast Iron (NF-Grey 7): The Effect of Ferrosilicon and Carbonised Coconut Shell Nanoparticle Addition
	2017

[22]	Reaction of Copper Adding on the Mechanical and Wear Capabilities of Iron based Powder-Metal Compacts
	2017

[23]	Effect of manganese, silicon and chromium additions on microstructure and wear characteristics of grey cast iron for sugar industries applications
	Wear, 2017

[24]	Wear Behaviour Of Low Alloy Grey Cast Iron (NF-GREY7): The Effect Of Ferrosilicon And Carbonised Coconut Shell Nanoparticle Addition
	UNILAG Journal of …, 2017

[25]	WEAR BEHAVIOUR OF LOW ALLOY GREY CAST IRON (NF-GREY7): THE EFFECT OF FERROSILICON AND CARBONISED COCONUT SHELL NANOPARTICLE …
	2017

[26]	PENGARUH VARIASI UNSUR SILIKON TERHADAP KETANGGUHAN BESI COR KELABU (GREY CAST IRON)
	2017

[27]	A REVIEW ON SAND CASTING PROCESS
	2016

[28]	Anti-Wear Enhancement of Silicon-Grey Cast Iron for the Production of Grinding Plates: Effect of Snail Shell Powder as Carbide Forming Material
	Silicon, 2016

[29]	WEAR BEHAVIOUR OF NF-GREY 8 ALLOYED WITH FEMN NANOPARTICLES.
	2016

[30]	TIG Eritilmiş Yüzey Otomotiv Silindir Liner Uygulaması Titanyum Alaşım Modifiye
	International Journal of Automotive Engineering and Technologies, 2015

[31]	Wet Sliding Wear Optimization of Gray Cast Iron using Taguchi Technique
	International Journal of Vehicle Structures & Systems, 2015

[32]	TIG Melted Surface Modified Titanium Alloy for Automotive Cylinder Liner Application
	International Journal of Automotive Engineering and Technologies, 2015

[33]	Wet Sliding Wear Optimization of Gray Cast Iron using Taguchi Technique.
	International Journal of Vehicle Structures & Systems (IJVSS), 2015

[34]	TIG melted surface modified titanium alloy for cylinder liner application
	2015

[35]	Wear Resistance of Different Types of Cast Iron used in Glass Blow Mould
	2015

[36]	The Effect of Molybdenum on the Tribological Behavior of Nfgrey (8) Cast Iron
	2014

[37]	Wear and Friction Behavior of Friction Pairs Tested with Different Types of Grey Cast Iron and Low Met Friction Material
	SAE Technical Paper, 2014

[38]	V 含量对低合金耐磨铸铁组织及性能的影响
	铸造技术, 2014

[39]	The Effect of Copper Addition on the Mechanical and Wear Properties of Grey Cast Iron
	Journal of Minerals and Materials Characterization and Engineering, 2014

[40]	Учредители: ООО" Фолиум

[1]	Effect of increased mechanical strength on the machinability of graphite cast irons in face milling The International Journal of Advanced Manufacturing Technology, 2023 DOI:10.1007/s00170-023-11012-0

[2]	Plastic deformation in nanoindentation of Alx(CuCrFeNi)1−x high entropy alloy Journal of Alloys and Compounds, 2023 DOI:10.1016/j.jallcom.2023.172172

[3]	Friction and Wear Behavior of High-Silicon Lamellar Graphite Cast Iron Truck Brake Discs Çukurova Üniversitesi Mühendislik Fakültesi Dergisi, 2023 DOI:10.21605/cukurovaumfd.1410373

[4]	Effect of Prosopis Juliflora Thorns on Mechanical Properties of Plastic Waste Reinforced Epoxy Composites Polymers, 2022 DOI:10.3390/polym14071278

[5]	Effects of Chemical Composition on Microstructure and Properties of High Phosphorus Grey Cast Iron Brake Shoe International Journal of Metalcasting, 2022 DOI:10.1007/s40962-021-00671-y

[6]	Effect of Detonation-Sprayed Cr3C2 and Ni – Cr Coatings on Performance Properties of Gray Cast Iron Gears Metal Science and Heat Treatment, 2022 DOI:10.1007/s11041-022-00758-1

[7]	Development microstructural characteristics and properties of carbidic ductile cast iron PROCEEDINGS OF ADVANCED MATERIAL, ENGINEERING & TECHNOLOGY, 2020 DOI:10.1063/5.0026175

[8]	Internal Cracks and Non-Metallic Inclusions as Root Causes of Casting Failure in Sugar Mill Roller Shafts Materials, 2019 DOI:10.3390/ma12152474

[9]	Development of a technology for the manufacturing of parts/components of an internal combustion engine involving additive manufacturing methods Power and Autonomous equipment, 2019 DOI:10.32464/2618-8716-2019-2-3-166-184

[10]	Model development for estimating the aging behaviors of gray cast iron (GCI) alloy at different times and temperatures The International Journal of Advanced Manufacturing Technology, 2018 DOI:10.1007/s00170-018-1587-8

[11]	The Effects of Silicon on The Hardness and Wear of Ferritic Grey Cast Iron on Shoe Brake of Train IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/384/1/012017

[12]	Wear and Friction Behavior of Friction Pairs Tested with Different Types of Grey Cast Iron and Low Met Friction Material SAE International Journal of Passenger Cars - Mechanical Systems, 2014 DOI:10.4271/2014-01-2525

[13]	The Effect of Copper Addition on the Mechanical and Wear Properties of Grey Cast Iron Journal of Minerals and Materials Characterization and Engineering, 2014 DOI:10.4236/jmmce.2014.25048

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Home

About SCIRP

Service

Policies