[1]
|
Advancements in 3D‐printed artificial tendon
Journal of Biomedical Materials Research Part B: Applied Biomaterials,
2024
DOI:10.1002/jbm.b.35364
|
|
|
[2]
|
3D SCAFFOLDS BY 3D BIOPRINTING
International Journal of Current Pharmaceutical Research,
2023
DOI:10.22159/ijcpr.2023v15i6.3075
|
|
|
[3]
|
Development, Properties, and Industrial Applications of 3D Printed Polymer Composites
Advances in Chemical and Materials Engineering,
2023
DOI:10.4018/978-1-6684-6009-2.ch006
|
|
|
[4]
|
Bone Tissue Regeneration: Rapid Prototyping Technology in Scaffold Design
Journal of The Institution of Engineers (India): Series C,
2022
DOI:10.1007/s40032-022-00872-2
|
|
|
[5]
|
A Review of Bone Regeneration Mechanisms and Bone Scaffold Fabrication Techniques (Conventional and Non-Conventional)
Journal of The Institution of Engineers (India): Series C,
2022
DOI:10.1007/s40032-022-00880-2
|
|
|
[6]
|
Inner strut morphology is the key parameter in producing highly porous and mechanically stable poly(ε-caprolactone) scaffolds via selective laser sintering
Materials Science and Engineering: C,
2021
DOI:10.1016/j.msec.2021.111986
|
|
|
[7]
|
Design of 3D printed scaffolds for bone tissue engineering: A review
Bioprinting,
2021
DOI:10.1016/j.bprint.2021.e00167
|
|
|
[8]
|
Fabrication of a Porous Three-Dimensional Scaffold with Interconnected Flow Channels: Co-Cultured Liver Cells and In Vitro Hemocompatibility Assessment
Applied Sciences,
2021
DOI:10.3390/app11062473
|
|
|
[9]
|
Advances in 3D Printing for Tissue Engineering
Materials,
2021
DOI:10.3390/ma14123149
|
|
|
[10]
|
A Review of Biomaterials and Scaffold Fabrication for Organ-on-a-Chip (OOAC) Systems
Bioengineering,
2021
DOI:10.3390/bioengineering8080113
|
|
|
[11]
|
Design of 3D printed scaffolds for bone tissue engineering: A review
Bioprinting,
2021
DOI:10.1016/j.bprint.2021.e00167
|
|
|
[12]
|
Inner strut morphology is the key parameter in producing highly porous and mechanically stable poly(ε-caprolactone) scaffolds via selective laser sintering
Materials Science and Engineering: C,
2021
DOI:10.1016/j.msec.2021.111986
|
|
|
[13]
|
A 3D‐printed polycaprolactone/β‐tricalcium phosphate mandibular prosthesis: A pilot animal study
The Laryngoscope,
2020
DOI:10.1002/lary.27908
|
|
|
[14]
|
Konstruktion für die Additive Fertigung 2018
2020
DOI:10.1007/978-3-662-59058-4_10
|
|
|
[15]
|
Recent advances in additive manufacturing technology for bone tissue engineering scaffolds
The International Journal of Advanced Manufacturing Technology,
2020
DOI:10.1007/s00170-020-05444-1
|
|
|
[16]
|
3D Printing in Biomedical Engineering
Materials Horizons: From Nature to Nanomaterials,
2020
DOI:10.1007/978-981-15-5424-7_15
|
|
|
[17]
|
Melt-based, solvent-free additive manufacturing of biodegradable polymeric scaffolds with designer microstructures for tailored mechanical/biological properties and clinical applications
Virtual and Physical Prototyping,
2020
DOI:10.1080/17452759.2020.1808937
|
|
|
[18]
|
3D Printing for Hip Implant Applications: A Review
Polymers,
2020
DOI:10.3390/polym12112682
|
|
|
[19]
|
Cellulose-Based Superabsorbent Hydrogels
Polymers and Polymeric Composites: A Reference Series,
2019
DOI:10.1007/978-3-319-77830-3_28
|
|
|
[20]
|
Structural, thermal and mechanical changes in poly(l-lactide)/hydroxyapatite composite extruded foils modified by CO2 laser irradiation
European Polymer Journal,
2019
DOI:10.1016/j.eurpolymj.2019.02.030
|
|
|
[21]
|
Akermanite reinforced PHBV scaffolds manufactured using selective laser sintering
Journal of Biomedical Materials Research Part B: Applied Biomaterials,
2019
DOI:10.1002/jbm.b.34349
|
|
|
[22]
|
Akermanite reinforced PHBV scaffolds manufactured using selective laser sintering
Journal of Biomedical Materials Research Part B: Applied Biomaterials,
2019
DOI:10.1002/jbm.b.34349
|
|
|
[23]
|
Bioprinting for Liver Transplantation
Bioengineering,
2019
DOI:10.3390/bioengineering6040095
|
|
|
[24]
|
Synthesis, microstructure, and mechanical behaviour of a unique porous PHBV scaffold manufactured using selective laser sintering
Journal of the Mechanical Behavior of Biomedical Materials,
2018
DOI:10.1016/j.jmbbm.2018.05.007
|
|
|
[25]
|
Cellulose-Based Superabsorbent Hydrogels
Polymers and Polymeric Composites: A Reference Series,
2018
DOI:10.1007/978-3-319-76573-0_28-1
|
|
|
[26]
|
Implementation of Industrial Additive Manufacturing: Intelligent Implants and Drug Delivery Systems
Journal of Functional Biomaterials,
2018
DOI:10.3390/jfb9030041
|
|
|
[27]
|
3D Printing Cellulose Hydrogels Using LASER Induced Thermal Gelation
Journal of Manufacturing and Materials Processing,
2018
DOI:10.3390/jmmp2030042
|
|
|
[28]
|
Additive Manufacturing with 3D Printing: Progress from Bench to Bedside
The AAPS Journal,
2018
DOI:10.1208/s12248-018-0225-6
|
|
|
[29]
|
Manufacturing the Gas Diffusion Layer for PEM Fuel Cell Using a Novel 3D Printing Technique and Critical Assessment of the Challenges Encountered
Materials,
2017
DOI:10.3390/ma10070796
|
|
|
[30]
|
Biocompatible 3D printed polymers via fused deposition modelling direct C2C12 cellular phenotype in vitro
Lab Chip,
2017
DOI:10.1039/C7LC00577F
|
|
|
[31]
|
Microsystems for Enhanced Control of Cell Behavior
Studies in Mechanobiology, Tissue Engineering and Biomaterials,
2016
DOI:10.1007/978-3-319-29328-8_16
|
|
|
[32]
|
Microsystems for Enhanced Control of Cell Behavior
Studies in Mechanobiology, Tissue Engineering and Biomaterials,
2016
DOI:10.1007/978-3-319-29328-8_15
|
|
|
[33]
|
Microsystems for Enhanced Control of Cell Behavior
Studies in Mechanobiology, Tissue Engineering and Biomaterials,
2016
DOI:10.1007/978-3-319-29328-8_18
|
|
|
[34]
|
Composite scaffolds for osteochondral repair obtained by combination of additive manufacturing, leaching processes and hMSC-CM functionalization
Materials Science and Engineering: C,
2016
DOI:10.1016/j.msec.2015.10.015
|
|
|
[35]
|
Assessment of biocompatibility of 3D printed photopolymers using zebrafish embryo toxicity assays
Lab Chip,
2016
DOI:10.1039/C5LC01374G
|
|
|
[36]
|
Biofabrication
Techniques in Orthopaedics,
2016
DOI:10.1097/BTO.0000000000000184
|
|
|
[37]
|
Design, analysis and fabrication of polyamide/ hydroxyapatite porous structured scaffold using selective laser sintering method for bio-medical applications
Journal of Mechanical Science and Technology,
2016
DOI:10.1007/s12206-016-1049-x
|
|
|
[38]
|
Open-Source Selective Laser Sintering (OpenSLS) of Nylon and Biocompatible Polycaprolactone
PLOS ONE,
2016
DOI:10.1371/journal.pone.0147399
|
|
|
[39]
|
Biofabrication: The Future of Regenerative Medicine
Techniques in Orthopaedics,
2016
DOI:10.1097/BTO.0000000000000184
|
|
|
[40]
|
A New File Format to Describe Fiber-reinforced Composite Workpiece Structure for Additive Technology Machines
Procedia Engineering,
2015
DOI:10.1016/j.proeng.2015.12.016
|
|
|
[41]
|
Evaluation of a Multiscale Modelling Methodology to Predict the Mechanical Properties of PCL/β-TCP Sintered Scaffold Materials
Annals of Biomedical Engineering,
2015
DOI:10.1007/s10439-014-1199-x
|
|
|
[42]
|
Optimisation of process parameters for lattice structures
Rapid Prototyping Journal,
2015
DOI:10.1108/RPJ-10-2012-0096
|
|
|
[43]
|
Improving the finite element model accuracy of tissue engineering scaffolds produced by selective laser sintering
Journal of Materials Science: Materials in Medicine,
2015
DOI:10.1007/s10856-014-5376-0
|
|
|
[44]
|
Recent advances in 3D printing of biomaterials
Journal of Biological Engineering,
2015
DOI:10.1186/s13036-015-0001-4
|
|
|
[45]
|
Evaluating the effect of increasing ceramic content on the mechanical properties, material microstructure and degradation of selective laser sintered polycaprolactone/β-tricalcium phosphate materials
Medical Engineering & Physics,
2015
DOI:10.1016/j.medengphy.2015.05.009
|
|
|
[46]
|
Controlling the porosity of collagen, gelatin and elastin biomaterials by ultrashort laser pulses
Applied Surface Science,
2014
DOI:10.1016/j.apsusc.2013.11.145
|
|
|
[47]
|
Predicting the Elastic Properties of Selective Laser Sintered PCL/β-TCP Bone Scaffold Materials Using Computational Modelling
Annals of Biomedical Engineering,
2014
DOI:10.1007/s10439-013-0913-4
|
|
|
[48]
|
Fabrication of dual-pore scaffolds using SLUP (salt leaching using powder) and WNM (wire-network molding) techniques
Materials Science and Engineering: C,
2014
DOI:10.1016/j.msec.2014.10.009
|
|
|
[49]
|
Free-Form Rapid Prototyped Porous PDMS Scaffolds Incorporating Growth Factors Promote Chondrogenesis
Advances in Materials Science and Engineering,
2014
DOI:10.1155/2014/612976
|
|
|
[50]
|
Processing and characterization of laser sintered hydroxyapatite scaffold for tissue engineering
Biotechnology and Bioprocess Engineering,
2013
DOI:10.1007/s12257-012-0508-1
|
|
|
[51]
|
Additive manufacturing of lab-on-a-chip devices: promises and challenges
Micro/Nano Materials, Devices, and Systems,
2013
DOI:10.1117/12.2033400
|
|
|
[52]
|
Characterization and Development of Biosystems and Biomaterials
Advanced Structured Materials,
2013
DOI:10.1007/978-3-642-31470-4_3
|
|
|
[53]
|
DEVELOPMENT OF COMPLEX POROUS POLYVINYL ALCOHOL SCAFFOLDS: MICROSTRUCTURE, MECHANICAL, AND BIOLOGICAL EVALUATIONS
Journal of Mechanics in Medicine and Biology,
2013
DOI:10.1142/S0219519413500346
|
|
|
[54]
|
Characterization and Development of Biosystems and Biomaterials
Advanced Structured Materials,
2013
DOI:10.1007/978-3-642-31470-4_3
|
|
|
[55]
|
Rapid Prototyping for Biomedical Engineering: Current Capabilities and Challenges
Annual Review of Biomedical Engineering,
2012
DOI:10.1146/annurev-bioeng-071811-150112
|
|
|
[56]
|
Tissue Engineering Using Novel Rapid Prototyped Diamond‐Like Carbon Coated Scaffolds
Plasma Processes and Polymers,
2012
DOI:10.1002/ppap.201100094
|
|
|
[57]
|
Fabrication, mechanical and in vivo performance of polycaprolactone/tricalcium phosphate composite scaffolds
Acta Biomaterialia,
2012
DOI:10.1016/j.actbio.2012.05.018
|
|
|
[58]
|
Fabrication, mechanical and in vivo performance of polycaprolactone/tricalcium phosphate composite scaffolds
Acta Biomaterialia,
2012
DOI:10.1016/j.actbio.2012.05.018
|
|
|
[59]
|
Tissue Engineering Using Novel Rapid Prototyped Diamond-Like Carbon Coated Scaffolds
Plasma Processes and Polymers,
2012
DOI:10.1002/ppap.201100094
|
|
|