has been cited by the following article(s):
[1]
|
Computational Alloy Design for Process-Related Uncertainties in Powder Metallurgy
|
|
Integrating Materials and …,
2022 |
|
|
[2]
|
Microstructure–Wear Resistance Relationship of Nitrogen-Containing High-Speed Tool Steel, AISIM41: Non-equilibrium Solidification
|
|
Metallography, Microstructure, and Analysis,
2022 |
|
|
[3]
|
Физическое моделирование решёток Браве в веб-среде
|
|
Системы. Методы …,
2021 |
|
|
[4]
|
Investigation of microstructure, mechanical and machinability properties of Mo-added steel produced by powder metallurgy method
|
|
2021 |
|
|
[5]
|
Исследование состава засаленного слоя алмазного шлифовального круга в поперечном разрезе
|
|
2020 |
|
|
[6]
|
Wear Characteristics of LASER Cladded Surface Coating
|
|
2020 |
|
|
[7]
|
Combined Electric Diamond Grinding of Materials Prone to Adhesive Diffusive Interaction
|
|
2019 |
|
|
[8]
|
Comparison of the Microstructure of M2 Steel Fabricated by Continuous Casting and with a Sand Mould
|
|
2019 |
|
|
[9]
|
Energy Calculation of Contact Surface Adhesion at Interaction in Different Media
|
|
2019 |
|
|
[10]
|
Efeito do superaquecimento na estrutura bruta de solidificação do aço AISI M2
|
|
2018 |
|
|
[11]
|
Non-equilibrium solidification and microsegregation in centrifugally cast high speed steel for rolls
|
|
2018 |
|
|
[12]
|
Defects in diamonds as the basic adhesion grinding
|
|
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017),
2017 |
|
|
[13]
|
Adhesive wear mechanism under combined electric diamond grinding
|
|
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017),
2017 |
|
|
[14]
|
Atomic visualization diamond cutting
|
|
2016 |
|
|
[15]
|
Termodinamska karakterizacija jekla 20MnCr5 pri kontroliranem valjanju: magistrsko delo
|
|
2016 |
|
|
[16]
|
The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings
|
|
Materials & Design,
2016 |
|
|
[17]
|
Атомная визуализация алмазного резания
|
|
2016 |
|
|
[18]
|
Pulsed plasma deposition of Fe-C-Cr-W coating on high-Cr-cast iron: Effect of layered morphology and heat treatment on the microstructure and hardness
|
|
Surface and Coatings Technology,
2016 |
|
|
[19]
|
On the evolution of secondary hardening carbides during continuous versus isothermal heat treatment of high speed steel HS 6-5-2
|
|
Materials Characterization,
2016 |
|
|
[20]
|
水冷铜模与砂模铸造 M2 钢显微组织对比
|
|
工程科学学报,
2016 |
|
|
[21]
|
Молекулярно-динамическое моделирование ювенильных поверхностей
|
|
2015 |
|
|
[22]
|
МЕХАНИКИ XXI ВЕКУ
|
|
|
|
|
[1]
|
Study on Equilibrium and Non-equilibrium Solidification of Boron-Containing High-Speed Tool Steel: Effect of Cooling Rate and Microstructure Investigation
Metallography, Microstructure, and Analysis,
2023
DOI:10.1007/s13632-023-00965-z
|
|
|
[2]
|
Computational Alloy Design for Process-Related Uncertainties in Powder Metallurgy
Integrating Materials and Manufacturing Innovation,
2022
DOI:10.1007/s40192-022-00255-6
|
|
|
[3]
|
Study on the Microstructure of Vanadium-Modified Tungsten High-Speed Steel-Coded SAE-AISI T1 Steel
Advances in Materials Science and Engineering,
2022
DOI:10.1155/2022/3469305
|
|
|
[4]
|
Comparison of the Microstructure of M2 Steel Fabricated by Continuous Casting and with a Sand Mould
Metals,
2019
DOI:10.3390/met9050560
|
|
|
[5]
|
Atomic visualization diamond cutting
Computer Research and Modeling,
2016
DOI:10.20537/2076-7633-2016-8-1-137-149
|
|
|