Author(s)

Haydar Aygün

School of Media Arts and Technology, Southampton Solent University, East Park Terrace, Southampton, UK.

Sound absorbers including porous materials are used widely for noise control. The most widely-exploited and acknowledged absorption mechanism in porous materials is viscous friction due to relative motion between solid and fluid. Acoustical performance of woven (carpet) and nonwoven (felt) materials made of wool using a traditional technique was investigated. Absorption coefficient of felt was measured using standing wave tube method with and without an air cavity. Data were compared with predictions determined using the laws of Delany and Bazely. Very good agreement between data and predictions was observed. Sound absorption coefficients of both materials also were measured using an impedance gun technique over a wider frequency range. Absorption coefficient obtained using impedance gun method shows that the absorption coefficient of felt is higher than the absorption coefficient of carpet for mid and higher frequencies. Furthermore insertion loss (IL) of the felt was measured in a circular duct. It is found that felt can attenuate sound pressure level between 1 dB and 10 dB.

Absorption Coefficient, Insertion Loss, Carpet, Felt, Sound Propagation

Aygün, H. (2017) Characterization of Acoustical Properties of Felt and Carpet Made of Natural and Environmentally Friendly Materials. Open Journal of Acoustics, 7, 27-38. doi: 10.4236/oja.2017.72004.