Biography

Nasir Hayat

Department of Mechanical Engineering

University of Engineering and Technology, Pakistan

Professor


Email: nasirhayat@uet.edu.pk


Qualifications

2003 Ph.D., Toyohashi University of Technology

1996 M. Engg., University of Melbourne

1991 B. Engg., University of Engineering and Technology


Publications (Selected)

  1. Nasir Hayat and Andrew Wirth, “Genetic Algorithms and Machine Scheduling with Class Setups”, International Journal of Computer and Engineering Management, Vol.5, 1997 (Cited Journal Article)
  2. N. Hayat, H. Toda, T. Kobayashi, N. Wade, “Fatigue Characteristics of AC4CH Aluminum Cast Alloys Fabricated by Inclined Cooling Plate Technique”, International Journal of Cast Metals Research, Vol.14, No.5, 2002
  3. N. Hayat, H. Toda, T. Kobayashi, N. Wade, “Experimental Investigations of Fatigue Characteristics of AC4CH Aluminum Cast Alloys Fabricated through Rheocast and Squeeze Cast Methods”, Materials Science Forum, Vol.396, 2002
  4. N. Hayat, H. Toda, T. Kobayashi, N. Wade, “Study of Damage Behavior of Cast Aluminum Alloys Fabricated through Rheocasting”, Japan Society of Plasticity/Semi-solid Processing of Alloys and Composites, 2002
  5. N. Hayat, T. Kobayashi, H. Toda, H. Kojima, “Grain Size Refinement through Gas Bubble Stirring in AC4CH Cast Aluminum Alloys”, International Journal of Cast Metals Research, Vol.15, No.5, 2002 (Cited Journal Article)
  6. N. Hayat, T. Kobayashi, H. Toda, H. Kojima, “Orientational Relationship and Fatigue Characteristics of Aluminum Cast Alloys Fabricated through Rheocast and Squeeze Cast Methods”, Japan Institute of Metals, 2002
  7. N. HAYAT, T KOBAYASHI, H TODA, L WANG, “Effect of gas bubbling conditions on the grain refinement in AC4CH cast aluminum alloy”, Meeting of JIM, VOL.131st; NO.;PAGE.499(2002)
  8. H. Toda, T. Kobayashi, T. Noguchi, D. Sugiyama, H. Miura and N. Hayat, “Fatigue characteristics of Aluminum Cast Alloy fabricated through rheocasting”, Casting Technology, Journal of Japan Foundry Engineering Society, Vol. 74, No.2, 2002. (Japanese)
  9. G. Hussain, G. Lin, and N. Hayat, “The effect of variation in the curvature of part formability in incremental forming: an experimental investigation”, International Journal of Machine Tools and Manufacture, 2007, 47, 2177-2181, (Cited Journal Article)
  10. G. Hussain, G. Lin, and N. Hayat, “Tool and lubrication for negative incremental forming of a commercially pure titanium sheet”, Journal of Materials Processing Technology, Vol. 203, Issues 1-3, 2008, Pages 193-201, (Cited Journal Article)
  11. G. Hussain, N. Hayat, and L. Gao “An experimental study on the effect of thinning bad on the sheet formability in negative incremental forming”, International Journal of Machine Tools and Manufacture, 2008, 28, 1170-1178 (Cited Journal Article)
  12. G. Hussain, G. Lin, and N. Hayat, “A new formability indicator in single point incremental forming”, Journal of Material Processing Technology, Vol.209, Issue.9, 2009, pages.4237-4242 (Cited Journal Article)
  13. G Hussain, L Gao, N Hayat, “Empirical modelling of the influence of operating parameters on the spifability of a titanium sheet using response surface methodology”, Proceedings of the Institution of Mechanical Engineers, PartB, Journal of Engineering Manufacture, Vol. 223, No. 1, 2009, 73-81
  14. Hussain, L. Gao, and N. Hayat, Empirical modelling of the influence of operating parameters on the spifability of a titanium sheet using response surface methodology, Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture 2009, vol. 223, no.1, pp. 73-81
  15. G. Hussain, G. Lin, and N. Hayat, “The formability of annealed and pre-aged AA-2024 sheets in single point incremental forming”, The International Journal of Advanced Manufacturing Technology, Vol.46, No.5-8, 2010, pages. 543-549 (Cited Journal Article)
  16. Ghulam Hussain, Gao Lin and Nasir Hayat, A new parameter and its effect on the formability in single point incremental forming: A fundamental investigation, Journal of Mechanical Science and Technology, Volume 24, Number 8 (2010), 1617-1621
  17. G. Hussain, G. Lin, Nasir Hayat, “New Methodologies for the determination of Precise Forming Limit Curve in Single Point Incremental Forming Process, Advanced Materials Research, Vols. 97-101, 2010, pp.126-129
  18. G. Hussain, L. Gao, and N. Hayat, On the Effect of Curvature Radius on the SPIF-ABILITY, Advanced Material Research., (Volumes 129 - 131), pp.1222-1227, 2010
  19. Ghulam Hussain, Nasir Hayat, Lin Gao, Role of Material Properties in Improving Sheet Formability in SPIF Process, Advanced Materials Research (Volumes 139 - 141), October, pp.600-604, 2010
  20. Ghulam Hussain, Gao Lin and Nasir Hayat, Improving profile accuracy in SPIF process through statistical optimization of forming parameters, Journal of Mechanical Science and Technology, Volume 25, Number 1 (2011), 177-182
  21. G. Hussain, L. Gao & N. Hayat, Forming Parameters and Forming Defects in Incremental Forming of an Aluminum Sheet: Correlation, Empirical Modeling, and Optimization: Part A, Materials and Manufacturing Processes Volume 26, Issue 12, 1546-1553, 2011,
  22. Muhammad Mahmood Aslam Bhutta, Nasir Hayat, Ahmed Uzair Farooq, Zain Ali, Sh. Rehan Jamil, Zahid Hussain, Vertical axis wind turbine – A review of various configurations and design techniques, Renewable and Sustainable Energy Reviews, Volume 16, Issue 4, May 2012, Pages 1926-1939
  23. Muhammad Mahmood Aslam Bhutta, Nasir Hayat, Muhammad Hassan Bashir, Ahmer Rais Khan, Kanwar Naveed Ahmad, Sarfaraz Khan, CFD applications in various heat exchangers design: A review, Applied Thermal Engineering, Volume 32, January 2012, Pages 1-12(Cited Journal Article)
  24. G. Hussain , L Gao, N. Hayat, Pyramid as test geometry to evaluate formability in incremental forming: Recent results, Journal of Mechanical Science and Technology, Volume 26, Number 8 (2012), 2337-2345
  25. G. Hussain, H. R. Khan, L. Gao & N. Hayat, Guidelines for Tool-Size Selection for Single Point Incremental Forming of an Aerospace Alloy, Materials and Manufacturing Processes, Accepted author version posted online: 05 Jul 2012
  26. Muhammad Mahmood Aslam Bhutta, Nasir Hayat, , Horizontal axis wind turbine – A review of various configurations and design techniques, Renewable and Sustainable Energy Reviews, ready to be submitted

Free SCIRP Newsletters
Copyright © 2006-2025 Scientific Research Publishing Inc. All Rights Reserved.
Top