Dr. Khaled A. Sallam

Mechanical and Aerospace Engineering

Oklahoma State University, USA

Associate Professor

Email: khaled.sallam@okstate.edu

Qualifications

2002 Ph.D., Aerospace Engineering, University of Michigan, USA.

2000 M.Sc., Aerospace Engineering, University of Michigan, USA.

1993 B.Sc., Mechanical Power Engineering, Cairo University, Egypt.

Publications (selected)

1. B. Kafle, B. V.M. da Silva, K.A. Sallam, “Temporal Variation of Droplet Spreading on Dense and Microporous Tubular Surfaces,” International Journal of Heat and Fluid Flow, Volume 110, 2024, 109616, https://doi.org/10.1016/j.ijheatfluidflow.2024.109616. .
2. A.J. Williamson and K.A. Sallam*, “Improving Vapor Compression Cycle Performance using Compressor-Expander Heat Transfer,” ASHRAE Journal, Volume 65, No. 4, 44-49, April 2023.
3. M.S. Raza and K.A. Sallam*, “Primary Breakup of Liquid Fan Sheet in Crossflow,” J. Aerosol Science, Volume 169, March 2023, 106135. https://doi.org/10.1016/j.jaerosci.2022.106135, IF: 4.586.
4. A.J. Williamson, S. Srivastava, and K.A. Sallam*, “Validating Confined Flame Noise Simulation Using External Sensor,” Sensors 2022, 22(20), 8039; https://doi.org/10.3390/s22208039, IF: 3.847.
5. S. Srivastava, A.M. Sheridan, M. Henneke, M.S. Raza, and K.A. Sallam*, “Structure of Choked Gas Jet,” J. Fluids Eng. Oct 2022, 144(10): 101301, https://doi.org/10.1115/1.4054139.
6. N. Indrawan*, A. Kumar, M. Moliere, K.A. Sallam, R.L. Huhnke, “Distributed power generation via gasification of biomass and municipal solid waste: A review,” Journal of the Energy Institute (2020), doi: https://doi.org/10.1016/j.joei.2020.07.001.
7. J. Lee and K.A. Sallam* (2017), “Column Thickness Variation of 100-mm Liquid Jets in Still Air,” Atomization and Sprays, 17 (1): 1-13.
8. Lee, J., and Sallam*, K.A., (2014), “Three Dimensional Trajectory of Electrospun Polymer Solution Jet using Digital Holographic Microscopy,” Polymer Engineering and Science, Vol. 54, No. 8, pp. 1765-1773.
9. Olinger, D.S., Sallam*, K.A., Lin, K.-C., and Carter, C.D., (2014) "Digital Holographic Analysis of the Near Field of Aerated-Liquid Jets in Crossflow," Journal of Propulsion and Power, Vol. 30, No. 6, pp. 1636-1645, https://doi.org/10.2514/1.B34984.
10. Osta, A.R., Lee, J., Sallam*, K.A., and Fezzaa, K., (2012), “Study of the Effects of the Injector Length/Diameter ratio on the Surface Properties of Turbulent Liquid Jets in Still Air using X-ray Imaging,” International Journal of Multiphase Flow, Vol. 38, pp. 87–98.

Profile Details

https://www.sallamresearchlab.com

https://orcid.org/0000-0003-2627-0060

https://ceat.okstate.edu/mae/faculty-staff/faculty-bios/khaled-sallam.html