Biography

Prof. Alicia Esther Ares

Materials Institute of Misiones

National Council of Scientific and Technical Research, Argentina

Professor


Email: aares@fceqyn.unam.edu.ar


Qualifications

2000 Ph.D., National Atomic Energy Commission and National University of General San Martin, Buenos Aires, Argentina, Science and Technology of Materials

1997 M.Sc., National Atomic Energy Commission and National University of General San Martin, Buenos Aires, Argentina, Science and Technology of Materials


Publications (Selected)

  1. Kramer, G. R., Bruera, F. A., Zapata, P. D., & Ares, A. E. (2025). Aluminum Oxide Coatings as Nanoadsorbents for the Treatment of Effluents Colored with Eriochrome Black T. Coatings, 15(4), 488.
  2. Ibañez, E. R., Alonso, P. R., & Ares, A. E. (2025, March). Structure and Mechanical Properties of Directionally Solidified Al–Si Alloys. In TMS Annual Meeting & Exhibition (pp. 411-418). Cham: Springer Nature Switzerland.
  3. Román, A. S., Ibañez, E. R., Zadorozne, N. S., Méndez, C. M., & Ares, A. E. (2024). Corrosion Susceptibility and Microhardness of Al-Ni Alloys with Different Grain Structures. Applied Sciences, 14(19), 8862.
  4. Dib, J., Strubbia, R., Abdelnabe, J. P., Prieto, G., Gómez, B., Méndez, C., ... & Hereñú, S. (2024). Improved tribological behaviour of super duplex stainless steel through plasma nitriding at ultra-low temperature without prior polishing. Surface and Coatings Technology, 483, 130806.
  5. Schmidt, F. A., Ares, A. E., & Méndez, C. M. (2024, February). Aloe Saponaria Gel as a Green Corrosion Inhibitor of Carbon Steel in an Acid Medium. In TMS Annual Meeting & Exhibition (pp. 1183-1193). Cham: Springer Nature Switzerland.
  6. Román, A. S., Igoa, G. M. B., Ibañez, E. R., Zadorozne, N. S., Méndez, C. M., & Ares, A. E. (2024, February). Influence of Alloying Agents on the Biodegradability of Zinc. In TMS Annual Meeting & Exhibition (pp. 366-376). Cham: Springer Nature Switzerland.
  7. Ibañez, E. R., Rodríguez, C. D., Alonso, P. R., & Ares, A. E. (2024, February). Effect of Silicon Content on Solidification Parameters and Microhardness of Al–Si Alloys. In TMS Annual Meeting & Exhibition (pp. 399-408). Cham: Springer Nature Switzerland.
  8. Román, A. S., Ibañez, E. R., Zadorozne, N. S., Méndez, C. M., & Ares, A. E. (2024). Corrosion Susceptibility and Microhardness of Al-Ni Alloys with Different Grain Structures. Applied Sciences, 14(19), 8862.
  9. Duarte, J. A., Möller, O., Boni, A. E., Ares, A. E., & Seufert, A. (2023). Caracterización Probabilistica de Cerámicas para Mamposterias de Ladrillos Huecos en Misiones, Argentina. + INGENIO-Revista de Ciencia Tecnología e Innovación, 4(2), 58-76.
  10. Ibañez, E. R., Alonso, P. R., & Ares, A. E. (2023). Neutron/X-ray diffraction study of crystalline texture and residual stresses of directional solidified Al-Si alloys at different cooling rates. Acta Cryst, 79, C114.
  11. Méndez, C. M., Gervasi, C. A., Pozzi, G., & Ares, A. E. (2023). Corrosion inhibition of aluminum in acidic solution by Ilex paraguariensis (Yerba Mate) extract as a green inhibitor. Coatings, 13(2), 434.
  12. Kociubczyk, A. I., Grau, J. E., Sarutti, J. L., Méndez, C. M., Gregorutti, R. W., & Ares, A. E. (2023). Solidification analysis, microhardness, and corrosion resistance of a cast hip prosthesis in ASTM F745 austenitic stainless steel. Journal of Materials Engineering and Performance, 32(3), 1065-1075.
  13. Dib, J., Gómez, B., Strubbia, R., Ares, A., Méndez, C., Fuster, V., & Hereñú, S. (2023). Characterization of plasma nitrided duplex stainless steel: influence of prior shot peening and nitriding atmosphere. Journal of Materials Engineering and Performance, 32(1), 406-414.
  14. Román, A. S., Ibañez, E. R., Méndez, C. M., Pedrozo, M., Kramer, G. R., Zadorozne, N. S., ... & Ares, A. E. (2022). Electrochemical Properties of Diluted Al-Mg Alloys With Columnar-To-Equiaxed Transition. Frontiers in Materials, 9, 857671.
  15. Bruera, F. A., Kramer, G. R., Velázquez, J. E., Sadañoski, M. A., Fonseca, M. I., Ares, A. E., & Zapata, P. D. (2022). Laccase immobilization on nanoporous aluminum oxide for black liquor treatment. Surfaces and Interfaces, 30, 101879.
  16. Ganz, N., Ares, A. E., & Kuna, H. D. (2021). Procedure to improve the accuracy of dental implant failures by data science techniques. Journal of Computer Science and Technology, 21(2), e13-e13.
  17. Bruera, F. A., Kramer, G. R., Vera, M. L., & Ares, A. E. (2021). Low-cost nanostructured coating of anodic aluminium oxide synthesized in sulphuric acid as electrolyte. Coatings, 11(3), 309.
  18. Ganz, N. B., Ares, A. E., & Kuna, H. D. (2020). Predicción de fracasos en implantes dentales mediante la integración de múltiples clasificadores. Revista de Ciencia y Tecnología, (34), 1-10.
  19. Román, A. S., Méndez, C. M., Gervasi, C. A., Rebak, R. B., & Ares, A. E. (2021). Corrosion resistance of aluminum-copper alloys with different grain structures. Journal of Materials Engineering and Performance, 30(1), 131-144.
  20. Bruera, F. A., Kramer, G. R., Vera, M. L., & Ares, A. E. (2020). Evaluation of the influence of synthesis conditions on the morphology of nanostructured anodic aluminum oxide coatings on Al 1050. Surfaces and Interfaces, 18, 100448.
  21. Friedrich, M. S., Ares, A. E., & Méndez, C. M. (2020). Corrosion inhibition effect of Aloe Saponaria gel on the corrosion resistance of aluminum. In Light Metals 2020 (pp. 452-459). Springer International Publishing.
  22. Bruera, F. A., Kramer, G. R., Vera, M. L., & Ares, A. E. (2019). Evaluation of surface pretreatment stages of Al 1050 to obtain nanostructured anodic films. Superlattices and Microstructures, 130, 103-116.
  23. Bruera, F. A., Kramer, G. R., Vera, M. L., & Ares, A. E. (2019). Synthesis and morphological characterization of nanoporous aluminum oxide films by using a single anodization step. Coatings, 9(2), 115.
  24. Kramer, G. R., Méndez, C. M., & Ares, A. E. (2018). Evaluation of corrosion resistance of commercial aluminum alloys in ethanol solutions. Materials Research, 21, e20170272.
  25. Schreiner, M. S., Zschach, L. G., Ares, A. E., & Méndez, C. M. EFECTO INHIBIDOR DEL GEL DE ALOE SAPONARIA EN LA CORROSIÓN DEL ALUMINIO EN UNA SOLUCIÓN DE HCL.


Profile Details

https://orcid.org/0000-0001-5384-8476

https://scholar.google.com/citations?user=sxJG038AAAAJ&hl=es

https://www.researchgate.net/profile/Alicia-Ares

Free SCIRP Newsletters
Copyright © 2006-2025 Scientific Research Publishing Inc. All Rights Reserved.
Top