Prof. Dai Gil Lee

Dept. of Mechanical Engineering

KAIST, Daejeon, South Korea

Professor

Email: dglee@kaist.ac.kr

Qualifications

1985 Ph.D., MIT, Department of Mechanical Engineering

1977 M.Eng., KAIST, Department of Mechanical Engineering

1975 B.Eng., Seoul National University, Department of Mechanical Engineering

Publications(selected)

1. Choi, C., Lee, G. J., Chang, S., Song, Y. M., & Kim, D. H. (2024). Nanomaterial-based artificial vision systems: from bioinspired electronic eyes to in-sensor processing devices. ACS nano, 18(2), 1241-1256.
2. Jeong, K. I., Oh, J., Song, S. A., Lee, D., Lee, D. G., & Kim, S. S. (2021). A review of composite bipolar plates in proton exchange membrane fuel cells: Electrical properties and gas permeability. Composite Structures, 262, 113617.
3. Lim, J., Jung, J. W., Kim, N. Y., Lee, G. Y., Lee, H. J., Lee, Y., ... & Kim, S. O. (2020). N2-dopant of graphene with electrochemically switchable bifunctional ORR/OER catalysis for Zn-air battery. Energy Storage Materials, 32, 517-524.
4. Heo, S. Y., Lee, G. J., Kim, D. H., Kim, Y. J., Ishii, S., Kim, M. S., ... & Song, Y. M. (2020). A Janus emitter for passive heat release from enclosures. Science advances, 6(36), eabb1906.
5. Lee, D., Oh, Y., Nam, S., Choe, J., & Lee, D. G. (2017). Adhesion characteristics of fiber-exposed glass composites. Composite Structures, 165, 9-14.
6. Lee, D., Choe, J., Nam, S., Lim, J. W., Choi, I., & Lee, D. G. (2017). Development of non-woven carbon felt composite bipolar plates using the soft layer method. Composite Structures, 160, 976-982.
7. Choe, J., Kim, M., Kim, J., & Lee, D. G. (2016). A microwave foaming method for fabricating glass fiber reinforced phenolic foam. Composite Structures, 152, 239-246.
8. Yuk, S., Choo, M. J., Lee, D., Guim, H., Kim, T. H., Lee, D. G., ... & Kim, H. T. (2016). Three-Dimensional Interlocking Interface: Mechanical Nanofastener for High Interfacial Robustness of Polymer Electrolyte Membrane Fuel Cells. Advanced Materials (Deerfield Beach, Fla.), 29(2).
9. Kang, H. S., Choi, J., Cho, W., Lee, H., Lee, D., Lee, D. G., & Kim, H. T. (2016). Silver nanowire networks embedded in a cure-controlled optical adhesive film for a transparent and highly conductive electrode. Journal of Materials Chemistry C, 4(41), 9834-9840.
10. Hwang, J. S., Choi, T. G., Lee, D., Lyu, M. Y., Lee, D. G., & Yang, D. Y. (2016). Development of a bendable pyramidal kagome structure and its structural characteristics. Composite Structures, 142, 87-95.
11. Nam, S., Lee, D., Kim, J., & Lee, D. G. (2016). Development of a fluoroelastomer/glass fiber composite flow frame for a vanadium redox flow battery (VRFB). Composite Structures, 145, 113-118.
12. Lee, J., Lee, D., Park, J., Choi, I., Lim, J. W., Kim, S., & Lee, D. G. (2016). Carbon/epoxy composite foot structure for biped robots. Composite Structures, 140, 344-350.
13. Yoon, K. R., Lee, G. Y., Jung, J. W., Kim, N. H., Kim, S. O., & Kim, I. D. (2016). One-dimensional RuO2/Mn2O3 hollow architectures as efficient bifunctional catalysts for lithium–oxygen batteries. Nano letters, 16(3), 2076-2083.
14. Kim, J. E., Lim, J., Lee, G. Y., Choi, S. H., Maiti, U. N., Lee, W. J., ... & Kim, S. O. (2016). Subnanometer cobalt-hydroxide-anchored N-doped carbon nanotube forest for bifunctional oxygen catalyst. ACS applied materials & interfaces, 8(3), 1571-1577.
15. Kim M, Lim J., and Lee D. (2015), Surface Modification of Carbon Fiber Phenolic Bipolar Plate for the HT-PEMFC with Nano-carbon Black and Carbon Felts, Composite Structures, 119, 630-637.
16. Choi I., Lee D., and Lee D. (2015), Optimum Design Method of a Nano-composite Radar Absorbing Structure Considering Dielectric Properties in the X-band Frequency Range, Composite Structures, 119, 218-226.
17. Choe J., Kim K., and Lee D. (2015), Corrugated Carbon/epoxy Composite Bipolar Plate for the vanadium Redox Flow Battery, Composite Structures, 119, 534-542.
18. Lee D., Choi I., and Lee D. (2015), Development of a Damage Tolerant Structure for Nano-composite Radar Absorbing Structures," Composite Structures, 119, 107-114.
19. Kim K., Choe J., Nam S., Kim B. and Lee D. (2015), Surface Crack Closing Method for the Carbon Composite Bipolar Plates of a Redox Flow Battery," Composite Structures, 119, 436-442.

Profile Details

http://me.kaist.ac.kr/eng/pop/team.html?uid=77&LANGUAGE_TYPE=eng
https://scholar.google.com/citations?user=fiStd-IAAAAJ&hl=en