Biography

Prof. Alexandre Maitre

Universite de Limoges, France


Email: alexandre.maitre@unilim.fr


Qualifications

2005 HDR (Post-doctoral degree), University of Nancy I, France

1998 Ph.D., Universite de Limoges, France

1993 M.S., Universite de Limoges, France


Publications (selected)

  1. Benjira, A., Antou, G., André, D., Rochais, D., Piquero, T., Scaringella-Guerritat, Y., & Maître, A. (2025). In-depth characterization of the early sintering stages of an amorphous silica powder. Journal of the European Ceramic Society, 45(3), 117031.
  2. Igoa Saldaña, F., Gaudisson, T., Le Floch, S., Baptiste, B., Delbes, L., Malarewicz, V., ... & Portehault, D. (2024). Transforming nanocrystals into superhard boron carbide nanostructures. ACS nano, 18(44), 30473-30483.
  3. Aliouat, A., Antou, G., Pradeilles, N., Rat, V., & Maître, A. (2023). Investigation of consolidation mechanisms induced by applied electric/electromagnetic fields during the early stages of spark plasma sintering. Journal of Alloys and Compounds, 963, 171276.
  4. Coëffe-Desvaux, M., Pradeilles, N., Marchet, P., Vandenhende, M., Joinet, M., & Maître, A. (2022). Comparative study on electrical conductivity of CeO2-doped AlN ceramics sintered by hot-pressing and spark plasma sintering. Materials, 15(7), 2399.
  5. Boulesteix, R., Goldstein, A., Perrière, C., Maître, A., Katz, M., Coureau, C., & Sallé, C. (2021). Transparent ceramics green-microstructure optimization by pressure slip-casting: Cases of YAG and MgAl2O4. Journal of the European Ceramic Society, 41(3), 2085-2095.
  6. Perrière, C., Boulesteix, R., Maitre, A., Forestier, B., Jalocha, A., & Brenier, A. (2021). Study of dopant distribution in Cr4+: YAG transparent ceramics and its use as passively Q-switching media in Nd: YAG laser delivering 38 mJ per pulse. Optical Materials: X, 12, 100107.
  7. Boulesteix, R., Chevarin, C., Belon, R., Maître, A., Cochain, L., & Sallé, C. (2020). Manufacturing of large size and highly transparent Nd: YAG ceramics by pressure slip-casting and post-sintering by HIP: an experimental and simulation study. Materials, 13(9), 2199.
  8. Arena, H., Coulibaly, M., Soum-Glaude, A., Jonchere, A., Mesbah, A., Arrachart, G., ... & Deschanels, X. (2019). SiC-TiC nanocomposite for bulk solar absorbers applications: Effect of density and surface roughness on the optical properties. Solar Energy Materials and Solar Cells, 191, 199-208.
  9. Belon, R., Boulesteix, R., Geffroy, P. M., Maitre, A., Sallé, C., & Chartier, T. (2019). Tape casting of multilayer YAG-Nd: YAG transparent ceramics for laser applications: Study of green tapes properties. Journal of the European Ceramic Society, 39(6), 2161-2167.
  10. Bonnet, L., Boulesteix, R., Maître, A., Belon, R., Chrétien, L., & Sallé, C. (2018). Influence of (Nd+ Y)/Al ratio on sintering behavior and optical features of Y3-xNdxAl5O12 ceramics for laser applications. Optical Materials, 77, 264-272.
  11. Boulesteix, R., Bonnet, L., Maître, A., Chrétien, L., & Sallé, C. (2017). Silica reactivity during reaction‐sintering of Nd: YAG transparent ceramics. Journal of the American Ceramic Society, 100(3), 945-953.
  12. Réjasse, F., Rapaud, O., Trolliard, G., Masson, O., & Maitre, A. (2016). Experimental investigation and thermodynamic evaluation of the C–O–Zr ternary system. RSC advances, 6(102), 100122-100135.
  13. Chretien, L., Bonnet, L., Boulesteix, R., Maitre, A., Salle, C., & Brenier, A. (2016). Influence of hot isostatic pressing on sintering trajectory and optical properties of transparent Nd: YAG ceramics. Journal of the European Ceramic Society, 36(8), 2035-2042.
  14. R.Boulesteix, A. Maître, L.Chrétien, Y. Rabinovitch, C. Sallé,Microstructural evolution during vacuum sintering of yttrium aluminum garnet transparent ceramics: Toward the origin of residual porosity affecting the transparency,J. Am. Ceram. Soc. 96 (6) 2013 1724-1731.
  15. L. Jaffres, A. Labruyère, V. Couderc, J. Carreaud, A. Maître, R.Boulesteix, A. Brenier,Gain structuration in dual-wavelength Nd:YSAG ceramic lasers,Optics Express20 (23) (2012) 25596-25602.
  16. S. Noyau, P.Garcia,B.Pasquet, I.Roure, F.Audubert,A.Maître,Towardsmeasuring the Pu self-diffusion coefficient in polycrystalline U0.55Pu0.45O2±x,Defect and Diffusion Forum323-325 (2012) 203-208.
  17. P. Guyot, V. Rat, J.F. Coudert, A. Maître, N. Pradeilles,Does the Branly effect occur in Spark Plasma Sintering?,Journal of Physics D: Applied Physics, 45 (9) , art. no. 092001.
  18. M. Gendre, A. Maître, G. Trolliard,Synthesis of zirconium oxycarbide (ZrCxOy) powders: influence of stoichiometry on densification kinetics during spark plasma sintering and mechanical properties, J. Europ. Ceram. Soc., 31 [13] (2011) 2377-2385.
  19. D. Pizon, R. Lucas, S.Chehaidi, S. Foucaud, A. Maître,ZrC-SiC materials from the polymer-derived ceramics route, Advanced Engineering Materials, 13 [7] (2011) 599-603.
  20. R. Boulesteix, A. Maître, J.-F.Baumard, Y. Rabinovitch, F. Reynaud,Light scattering by pores in transparent Nd: YAG ceramics for lasers: Correlations between microstructure and optical properties,Optics Express,18 [14] (2010) 14637-14643.
  21. M. Gendre, A. Maître, G.Trolliard,A study of the densification mechanisms during spark plasma sintering of zirconium (oxy-)carbide powders,Acta Mater., 58 [7] (2010) 2598-2609.
  22. R. Boulesteix, A. Maître, J.-F. Baumard, Y. Rabinovitch, C. Sallé, S. Weber, M. Kilo,The effect of silica doping on neodymium diffusion in yttrium aluminum garnet ceramics: implications for sintering mechanisms,J. Europ. Ceram. Soc. 29 [12] (2009) 2517-2526.
  23. G. Antou, M. Gendre, G. Trolliard, A.Maître,Spark plasma sintering of zirconium carbide and oxycarbide: Finite element modeling of current density, temperature, and stress distributions,J. Mater.Res.,24 [2] (2009) 404-412.
  24. F. Rossi, M. Lambertin, L.Delfaut-Durut, A. Maître, M. Vilasi,Influence of the cooling rate on the ageing of lead-calcium alloys,J. Power Sources, 188 [1)] (2009) 296-300.
  25. L. Charpentier, A. Maître, M.Balat-Pichelin, S. Foucaud, F. Audubert,Influence of alumina on the passive oxidation at low oxygen pressure of hot-pressedα-SiC,Scripta Materialia,60 [7] (2009) 481-484.
  26. R. Boulesteix, A. Maître, J.-F. Baumard, C. Sallé, Y. Rabinovitch,Mechanism of the liquid phase sintering for Nd:YAG ceramics, Optical Materials, 31 [5] (2009) 711-715.
  27. J. Mouzon, A. Maître, N. Lehto, M. Odén,Fabrication of transparent yttria by HIP and the glass-canning method, J. Europ. Ceram. Soc, 29 [2] (2009) 311-316.
  28. A. Maître, D. Beyssen, R. Podor,Modelling of the grain growth and the densification of SnO2-based ceramics, Ceramics International, 34 [1] (2008) 27-35.
  29. A. Maître, A. Vande Put, J.-P. Laval, G. Trolliard,Role of boron on the Spark Plasma Sintering of silicon carbide,28 (2008) 1881-1890.
  30. F. Goutier, G. Trolliard, S. Valette, A. Maître,C. Estournes,Role of impurities on the SPS sintering for ZrCx-ZrB2composites, J. Europ. Ceram. Soc., 28 [3] (2008) 671-678.
  31. C. Sallé, A. Maître, J.-F. Baumard, Y. Rabinovitch,Effect of silica on the pressure-less sintering of Nd:YAG based ceramic, J. Am. Ceram. Soc, 91 [2] (2008) 406.
  32. Y. Cartigny, J.M. Fiorani, A. Maître, M. Vilasi,Pb-based composites materials for grids of acid battery, Materials Physics and Chemistry, 103 [2-3] (2007) 270-277.
  33. C. Marchand, A. Maître, A. Grimaud, A. Denoirjean, P. Lefort,Nitridation of Ti-6Al-4V powder in thermal plasma conditions and sintering of obtained TiN powder,Surface and Coatings Technology,201 [5] (2006) 1988-1994.
  34. A. Maître, D. Beyssen, R. Podor,Effect of ZrO2additions on sintering of SnO2-based ceramics,J. Europ. Ceram. Soc., 24 (2004) 3111.
  35. A. Maître, M. François, J.C. Gachon,Experimental study of theBi2O3-Fe2O3pseudo-binary system, Journal of Phase Equilibria,25 (2004) 59.
  36. A. Maître, G. Bourguignon, G. Medjahdi, E. McRae, M.H. Mathon,Experimental study of L12phase precipitation in the Pb(0.08)Ca(2.0)Sn alloy by resistivity and SANS measurements,Scripta Materialia,50 (2004) 686.
  37. A. Maître, G. Bourguignon, J.M. Fiorani, J. Ghanbaja, J. Steinmetz,Aging and overaging processes in Pb-0.08%Ca-x%Sn alloysusingTEM and DSC, Materials Science and Engineering A, A340 (2003) 103.
  38. G. Bourguignon, A. Maître, E. Rocca, J. Steinmetz, L. Torcheux,Electrochemical study in sulfuric acid of the hardening L12 phases of the PbCaSn alloys, J. Power Sources, 113 (2003) 301.
  39. A. Maître, G. Bourguignon, J.M. Fiorani, J. Ghanbaja, J. Steinmetz, Precipitation hardening in Pb-0.08%Ca-x%Sn alloys - the role of the pre-ageing, Materials Science and Engineering A, A358 (2003) 233.
  40. Y. Cartigny, J.M. Fiorani, A. Maître, M. Vilasi,Thermodynamic assessment on the Pb-Ca-Sn ternary system, Intermetallics, 11-12 (2003) 1205.
  41. S. Cahen N. David, J.M. Fiorani, A.Maître, M.Vilasi,Thermodynamic Modelling of the O-Sn System, Thermochimica Acta, 403 (2003) 275.
  42. B. Gaillard-Allemand, R. Podor, C.Rapin, M.Vilasi, A.Maître, P. Steinmetz,Experimental study of SnO2-ZrO2system, J. Europ. Ceram. Soc., 22 (2002) 2297.
  43. A. Maître, J.M. Fiorani, M. Vilasi, A thermodynamic study of phase equilibria in the Pb-Bi-Hg system,Journal of Phase Equilibria, 23 (2002) 329.
  44. A. Maître, A.Denoirjean, P. Fauchais, P. Lefort,Plasma-jet coating of preoxidized XC38 steel: influence of the nature of the oxide layer, Physical Chemistry Chemical Physic, 4 (2002) 3887.
  45. A. Maître, D. Tétard, P. Lefort,Role of some technological parameters during carburizing titanium dioxide, J. Europ. Ceram. Soc., 20 (2000) 15.
  46. A. Maître et P. Lefort,Carbon oxidation at high temperatures during carbothermal reduction of titanium dioxide, Phys. Chem. Chem. Phys. 1 (1999) 2311.
  47. A. Maître, P. Lefort,Solid state reaction of zirconia with carbon, J. of Solid State Ionics, 104 (1997) 109.


Profile Details

https://www.unilim.fr/alexandre-maitre-licence-pro-unique-france/
https://sciprofiles.com/profile/879853
https://orcid.org/0000-0002-4706-3741
https://www.researchgate.net/scientific-contributions/Alexandre-Maitre-42409484

Free SCIRP Newsletters
Copyright © 2006-2025 Scientific Research Publishing Inc. All Rights Reserved.
Top