Dr.Mohammad R. Allazadeh

Hungarian Academy of Sciences, Hungary

Email: allazadeh@mfa.kfki.hu

Qualifications

2009  Ph.D., University of Pittsburgh, Pittsburgh, PA, USA, Mechanical Engineering and Material Science

2004  M.Sc., Brown University, Providence, RI, USA, Engineering Division

1999  M.Sc., University of Miskolc, Miskolc, Hungary, Mechanical Engineering

Publications (Selected)

Books

1. Mohammad Reza Allazadeh, "Analytical Solutions for Cutting Mechanism: Applicable in Metallic Materials and Rocks", LAP, LAMBERT Academic Publishing GmbH & Co. KG, ISBN: 978-3-8454-3910-5 (2011).
2. Mohammad Reza Allazadeh, “COOLING RATE OPTIMIZATION FOR QUENCHING AS-CAST STEEL IN INDUSTRY: INTRODUCING A TECHNICAL ROAD MAP TO OPTIMIZE THE COOLING RATE OF THE AS-CAST STEEL PRODUCED BY CONSCIOUSLY CAST STEEL METHOD”, VDM Publishing House, ISBN-13: 978-3639316612, (2010).
3. Mohammad Reza Allazadeh, “Using small Specimens technique in Nuclear Pressure Vessel survey: Studying Crack Propagation of Steel Used in Nuclear Pressure Vessel Using Small Specimen Technique”, VDM Publishing House, ISBN-13: 978-3639217186, (2009).
4. AllazadehM R, GarciaC I, AldersonK J, DeArdoA J: Using NDT Image Processing Analysis to Study the Soundness and Cleanliness of Accelerated Cooled Continuously Cast Steel Slabs, Materials Science and Technology Conference and Exhibition, MS and T'08. Pittsburgh: (2008). pp: 1853-1864.

Journals

1. Allazadeh M. R., Itani K Maher, Wosu Sylvanus N. ;”Compression of the material characteristics of steel, aluminum, wood and woven graphite epoxy composites in response to high strain rate load”, International Journal of Advances in Materials Science and Applications, Vol. 2 Issue 2, AMSA10006, (June 2013).
2. Allazadeh M. R., Lovel M., Marangoni R., „Liquid Level Sensor for High Temperature Molten Salt in Confined Container, Frontiers in Sensors” , Volume 1, Issue 2, No: FS012 (2013).
3. Allazadeh M. R., “Formation of defects in the steel microstructure during solidification and their effects on the steel material” STEEL GRIPS (2013) manuscript G 02368.
4. Mohammad Reza Allazadeh,“Cooling rate optimization of as-cast consciously cast steel”; IJMSE, Vol. 9, Number 3, September 2012.
5. Mohammad Reza Allazadeh, "A method to determine the cleanliness of steel qualitatively in as-cast continuously cast steel after secondary cooling stage", accepted for 8th International Conference on Clean Steel on 14-16 May 2012 in Budapest, Hungary.
6. Allazadeh M. R., Itani K Maher, Wosu Sylvanus N. ;"Characterization of Compressive Damage Behavior of Steel and Aluminum"; Journal of Materials Science Research, Vol. 1, No. 1, January 2012.
7. Turan Fatih, Allazadeh Mohammad R., Wosu Sylvanus N., " Effects of the Loading Direction on High Strain Rate Behavior of Woven"; Journal of Materials Science Research, Vol. 1, No. 2, April 2012.
8. Turan Fatih, Allazadeh Mohammad R., Wosu Sylvanus N, "Effect of the Contact Geometry on High Strain Rate Behavior of Woven Graphite/Epoxy Composites"; Journal of Materials Science Research, Vol. 1, No. 1, January 2012.
9. Allazadeh M. R., Garcia C.I.; “An FEM technique to study residual stresses developed in continuously cast steel during solid-solid phase transformation”, Ironmaking and Steelmaking: Processes, Products and Applications, Volume 38, Number 6; DOI: 10.1179/1743281211Y.0000000046. ISSN 0301-9233, Online ISSN: 1743-2812 (Publication date: 2011-08-01)
10. Allazadeh M. R. and Wosu Sylvanus N. ;"High Strain Rate Compressive Tests on Woven Graphite Epoxy Composites” Chemistry and Materials Science, Applied Composite Materials, Volume 18, Number 4, pp: 311-325, (August 2011), DOI: 10.1007/s10443-010-9159-6.
11. Allazadeh M. R. and Wosu Sylvanus N.;" High Strain Rate Compressive Tests on Wood”; Strain, An international Journal for Experimental Mechanics, STRAIN- (January 2011), DOI: 10.1111/j.1475-1305.2010.00802.
12. Allazadeh Mohammad R.;" Stresses introduced during cooling the as-cast steel slab", STEEL GRIPS 8 (2010) , Process technology, p. 285/289
13. Allazadeh Mohammad R.;"Brief history of controlling cooling rate in cast steel", STEEL GRIPS 8 (2010), Products & Quality p. 274/77.
14. Allazadeh M. R.; “Simulation of solid-solid phase transformation during cooling process”; symposium Domain Microstructures and Mechanisms for Advanced Properties in Phase Transforming Materials, session modeling of rolling and cooling, MST09 conference, (October 2009).
15. Allazadeh M. R., Garcia C. I., DeArdo A.J. and Lovell M. R.; “Analysis of Stress Concentration around Inclusions due to Thermally Induced Strain to the Steel Matrix”; Journal of ASTM International, paper No. 016905JAI, volume 6, issue 5, (May-2009).
16. Allazadeh M. R.; “The Effect of Cooling Rate on the Microstructural Configuration of Continuously Cast Steel Slabs”; PhD dissertation, University of Pittsburgh, (2009).
17. Allazadeh M. R., Garcia C.I., Alderson K.J., and DeArdo A.J.; “Using NDT Image Processing Analysis to Study the Soundness and Cleanliness of Accelerated Cooled Continuously Cast Steel Slabs”; Advanced Materials & Processes, Volume 166, Issue 12, (December 2008), pp: 26-27, DOI: 10.1361/amp16612p26.
18. Allazadeh M. R.; “Using small specimen testing and results in nuclear power plant survey”, Master's Thesis, University of Miskolc, (1999).