Department of Industrial Engineering

University of Parma, Italy

Professor

Email: giulio.lorenzini@unipr.it

Qualifications

1999 Ph.D., Nuclear Engineering, Alma Mater Studiorum-University of Bologna, Italy

1994 M.Sc., Nuclear Engineering, Alma Mater Studiorum-University of Bologna, Italy

Publications (Selected)

1. G. Lorenzini, C. Biserni, L.A. Isoldi, E. Domingues dos Santos, L.A.O. Rocha (2011) Costructal design applied to the geometric optimization of y-shaped cavities embedded in a conducting medium, ASME Journal of Electronic Packaging, 133 (4), 041008-1– 041008-8.
2. G. Lorenzini, C. Biserni and L.A.O. Rocha (2011) Geometric optimization of isothermal cavities according to Bejan’s theory, International Journal of Heat and Mass Transfer, 54 (17-18), 3868 – 3873.
3. G. Lorenzini, R. Lima Correa, E. Domingues dos Santos and L.A.O. Rocha (2011) Constructal design of complex assembly of fins, ASME Journal of Heat Transfer, 133 (8), 081902-1– 081902-7.
4. G. Lorenzini and S. Moretti (2011) Bejan’s Constructal theory analysis of gas-liquid cooled finned modules, ASME Journal of Heat Transfer, 133 (7), 071801-1 – 071801-10.
5. G. Lorenzini and S. Moretti (2009) A Bejan’s Constructal Theory approach to the overall optimization of heat exchanging finned modules with air in forced convection and laminar flow condition, ASME Journal of Heat Transfer, 131 (8), 081801-1 – 081801-18.
6. G. Lorenzini and S. Moretti (2009) Numerical performance analysis of Constructal I and Y finned heat exchanging modules, ASME Journal of Electronic Packaging, 131(3), 031012-1 – 031012-10.
7. G. Lorenzini and L.A.O. Rocha (2009) Constructal design of T-Y assembly of fins for an optimized heat removal, International Journal of Heat and Mass Transfer, 52 (5–6), 1458 – 1463.
8. G. Lorenzini and S. Moretti (2008) Numerical heat transfer optimisation in modular systems of Y-shaped fins, ASME Journal of Heat Transfer, 130 (8), 081801-1 – 081801-5.
9. G. Lorenzini and E. Casalena (2008) CFD analysis of pulsatile blood flow in an atherosclerotic human artery with eccentric plaques, Journal of Biomechanics, 41 (9), 1862 – 1870.
10. G. Lorenzini and S. Moretti (2007) A CFD application to optimize T-shaped fins: comparisons to the Constructal theory's results, ASME Journal of Electronic Packaging, 129 (3), 324 – 327.
11. G. Lorenzini and Simone Moretti (2007) Numerical analysis on heat removal from Y-shaped fins: efficiency and volume occupied for a new approach to performance optimisation, International Journal of Thermal Sciences, 46 (6), 573 – 579.
12. G. Lorenzini and Simone Moretti (2007) Numerical analysis of heat removal enhancement with extended surfaces, International Journal of Heat and Mass Transfer, 50 (3 – 4), 746 – 755.
13. G. Lorenzini and Luiz A. O. Rocha (2006) Constructal design of Y-shaped assembly of fins, International Journal of Heat and Mass Transfer, 49 (23 – 24), 4552 – 4557.
14. D. De Wrachien and G. Lorenzini (2006) Modelling jet flow and losses in sprinkler irrigation: overview and perspective of a new approach, Biosystems Engineering, 94 (2), 297 – 309.
15. G. Lorenzini (2006) Water droplet dynamics and evaporation in an irrigation spray, Transactions of the ASABE, 49 (2), 545 – 549.