Dr. Hongwei Wu
School of
Engineering and Technology
University of
Hertfordshire, UK
Email: h.wu6@herts.ac.uk
Qualifications
2004 PhD, Mechanical and Aerospace Engineering, Beihang University &
Hong Kong Univ. of Science and Technology, China
2000 MSc, (Distinction)
Mechanical and Aerospace Engineering, Beihang University, China
1998 BEng, (1st Class Honours)
Mechanical and Aerospace Engineering, Beihang University, China
Publications (selected)
-
(2017) Yang, B., Chang, S., *Wu,
H., Zhao, Y., Leng, M., “Experimental and Numerical Simulation of Heat Transfer
in an Array of Impingement Jets on Concave Surface” Applied Thermal
Engineering, 127:473-483
-
(2017)
Zhai, L, Xu, G., Quan, Y., Song, G., Dong, B., *Wu, H., “Numerical Analysis of
the Axial Heat Conduction with Variable Fluid Properties in a Forced Laminar
Flow Tube” International Journal of Heat and Mass Transfer, 114:238-251
-
(2017)
Yuan, Y., Xu, G., Quan, Y., *Wu, H., Song, G., Gong, W., Luo, X., “Performance
Analysis of a New Two-stage Organic Rankine Cycle for Waste Heat Recovery”
Energy Conversion and Management, 148:305-316
-
(2017)
Gao, X., Yuan, Y., Cao, X., Wu, H., Zhao, X., “Coupled Cooling Method and
Application of Latent Heat Thermal Energy Storage Combined with Pre-cooling of
Envelope: Sensitivity Analysis and Optimization” Process Safety and
Environmental Protection, 107:438-453
-
2017)
Shi, S., Xie, Y., Li, M., Yuan, Y., Yu, J., *Wu, H., Liu, B., Liu, N.,
“Non-steady Experimental Investigation on an Integrated Thermal Management
System for Power Battery with Phase Change Materials” Energy Conversion and
Management, 138:84-96
-
(2017)
Li, H., Huang, H., Xu, G., Wen, J., Wu, H., “Performance Analysis of a Novel
Compact Air-air Heat Exchanger for Aircraft Gas Turbine Engine using LMTD
method” Applied Thermal Engineering, 116:445-455
-
(2017)
Xie, Y., Gilmour, M.S., Yuan, Y., Jin, H., *Wu, H., “A Review on House Design
with Energy Saving System in the UK” Renewable and Sustainable Energy Reviews,
71:29-52
-
(2017)
Deng, Y., Wu, H., Su, F., “Combustion and Exhaust Emission Characteristics of
Low Swirl Injector” Applied Thermal Engineering, 110:171-180
-
(2017)
Chen, M., Xie, Y., *Wu, H., Shang, S., Yu, J., “Modeling Solubility of Nitrogen
in Clean Fire Extinguishing Agent by Peng-Robinson Equation of State and a
Correction of Henry’s Law Constants” Applied Thermal Engineering, 110:457-468
-
(2017) Yuan, Y., Gao, X., Wu, H., Zhang, Z., Cao, X., Yu, N.,
“Coupled Cooling Method and Application of Latent Heat Thermal Energy Storage
Combined with Pre-cooling of Envelope: Method and Model development” Energy,
119:817-833
-
(2016) Liu, D., Tao, Z., Luo, X., Kang, W., *Wu, H., Yu, X.,
“Investigation on the Impact of Protrusion Parameter on the Efficiency of
Converting Additional Windage Loss for Ingress Alleviation in Rotor-Stator
System” ASME Journal of Engineering for Gas Turbines and Power,
138(11):112604-112604-9
-
(2016) Zhu, J., Wang, K., Jiang, Z., *Wu, H., Wang, D., Lin, F.,
Li, Y., “Experimental Study of the Energy and Exergy performance for a
Pressurized Volumetric Solar Receiver” Applied Thermal Engineering,104:212-221
-
(2016) Liu, X., Zhang, X., Lu, T., Mahkamov, K., *Wu, H.,
Mirzaeian, M., “Numerical Simulation of Sub-cooled Boiling Flow with Fouling
Deposited inside Channels” Applied Thermal Engineering, 103:434-442
-
(2016) Wang, C., Chang, S., Leng, M., *Wu, H., Yang, B., “A
Two-dimensional Splashing Model for Investigating Impingement Characteristics
of Supercooled Large Droplets” International Journal of Multiphase Flow.
80:131-149
-
(2016) Jiang, Z., Wang, K., *Wu, H., Wang, Y., Du, J., “A
Two-dimensional Analytical Model for Prediction of the Radiation Heat Transfer
in Open-cell Metal Foams” Applied Thermal Engineering, 93:1273-1281
-
(2016) Liu, D., Tao, Z., Luo, X., *Wu, H., Yu, X., “Development of
a New Factor for Hot Gas Ingestion Through Rim Seal” ASME Journal of
Engineering for Gas Turbines and Power, 138:072501-1.
-
(2016) Chang, S., Leng, M., *Wu, H., Thompson, J.M. “Aircraft Ice
Accretion Prediction Using Neural Network and Wavelet Packet Transform.”
Aircraft Engineering and Aerospace Technology, 88(1):128-136.
-
(2015) Wang, K., *Wu, H., Wang, D., Tong, Z., Olabi, A.
“Experimental Study on a Coiled Tube Solar Receiver under Variable Solar
Radiation Condition”, Solar Energy, 122:1080-1090.
-
(2015) Zhu, J., Wang, K., *Wu, H., Wang, D., Du, J., Olabi, A.
“Experimental Investigation on the Energy and Exergy Performance of a Coiled
Tube Solar Receiver.” Applied Energy, 156:519-527.
-
(2015) Xie, Y., Zhang, J., Yu, Y., Xie, L., Wu, H., Zhang, H.,
Gao, H. “Experimental Investigation On the Operating Characteristics of a Dual
Compensation Chamber Loop Heat Pipe Subjected to Acceleration Field.” Applied
Thermal Engineering, 81:297-312.
-
(2015) Wang, C., Chang, S., Wu, H. “Lagrangian Approach for
Simulating Supercooled Large Droplets’ Impingement Effect.” AIAA Journal of
Aircraft, 52(2):524-537.
-
(2015) Wang, C., Chang, S., Wu, H., Ding, L., Thompson, J.M.
“Theoretical Modeling of Spray Drop Deformation and Breakup in the Multimode
Breakup Regime.” Atomization and Sprays, 25(10):857-869.
-
(2014) Luo, X., Wang, L., Zhao, X., Xu, G., *Wu, H. “Experimental
Investigation of Heat Transfer in a Rotor-Stator Cavity with Cooling Air Inlet
at Low Radius.” International Journal of Heat and Mass Transfer, 76:65-80.
-
(2014) Luo, X., Zhao, X., Wang, L., *Wu, H., Xu, G. “Flow
Structure and Heat Transfer Characteristics in Rotor-Stator Cavity with Inlet
at Low Radius.” Applied Thermal Engineering, 70:291-306.
-
(2014) Luo, X., Han, G., *Wu, H., Wang, L., Xu, G. “Experimental
Investigation of Pressure Loss and Heat Transfer in a Rotor-Stator Cavity with
Two Outlets.” International Journal of Heat and Mass Transfer, 78:311-320.
-
(2014) Luo, X., Liu, D., *Wu, H., Tao, Z. “Particle Image
Velocimetry Measurement and Computational Fluid Dynamic Simulations of the
Unsteady Flow within a Rotating Disk Cavity.” ASME Journal of Engineering for
Gas Turbines and Power, 136:112601-1.
-
(2014) Chen, Q., Yang, R., Zhao, B., Li, Y., Wang, S., Wu, H.,
Zhuo, Y, Chen, C. “Investigation of Heat of Biomass Pyrolysis and Secondary
Reactions by Simultaneous Thermogravimetry and Differential Scanning
Calorimetry.” Fuel, 134:467-476.
-
(2014) Wang, C., Chang, S., Wu, H., Xu, J. “Modeling of Drop
Breakup in the Bag Breakup Regime.” Applied Physics Letters, 104 (15):154107.
-
(2014) Xie, L., Xie, Y., Wu, H., Yu, J. “High Gravity Influence on
Boiling Heat Transfer in Helical Coils.” International Journal of Heat and Mass
Transfer, 73:706-715.
-
(2013) Wu, H., Tassou, SA., Karayiannis TG. “Modelling and Control
Approaches for Energy Reduction in Continuous Frying Systems.” Applied Energy,
112:939-948.
Profile Details
http://researchprofiles.herts.ac.uk/portal/en/persons/hongwei-wu(917b22b5-2228-4961-a480-03149ae43905).html