Biography

Prof. Nagwa Ahmed Abdelhalim Ibrahim

Automotive and tractor Engineering Department, Faculty of Engineering

Helwan University, Egypt


Email: nagwaibrahim2006@yahoo.co.uk


Qualifications

1998 PhD, Helwan University, Egypt

1992 M.Sc., Helwan University, Egypt

1984 B.Sc., Helwan University, Egypt


Publications (Selected)

  1. N A Abdel-Halim, D C Barton, D A Crolla and A M Selim, "Performance of multi-cone synchronisers for manual Transmissions", IMechE, August 1999.
  2. Al-Emam M.Selim, Said A. Hassan, Aly M.A.A. Abou El-Nour, and Nagwa A. Abdel-Halim, "A computerized operation and maintenance policy for a fleet of vehicles: on a very large corporation", Engineering Research Journal, Helwan University, Volume 70, August 2000.
  3. N A Abdel-Halim and M A A Emam, "Prediction of Automotive Single-Cone Synchronizer Performance Using the Artificial Neural Networks", Ain Shams Journal of Mechanical Engineering, ASJME, Vol. 1, pp. 79-88 April, 2008.
  4. Nagwa Abd-elhalim, Nabil Hammed, Magdy Abdel-hady, Shawki Abouel-Seoud and Eid S. Mohamed, "Vehicle Gearbox Condition Monitoring Using Vibration Signature Analysis", SAE Aerospace Manufacturing and Automated Fastening Conference and Exhibition, Paper 2008-01-2295, September 2008.
  5. Nagwa Abd-elhalim, Nabil Hammed, Magdy Abdel-hady, Shawki Abouel-Seoud and Eid S. Mohamed, " Dynamic Modeling of Vehicle Gearbox for Early Detection of Localized Tooth Defect", SAE Commercial Vehicle Engineering Congress and Exhibition Conference, Paper 2008-01-2630, October 7-9,2008.
  6. Nagwa Abd-elhalim, Nabil Hammed, Magdy Abdel-hady, Shawki Abouel-Seoud and Eid S. Mohamed, " The Importance of Vehicle Gear Tooth Meshing Stiffness in Gear Tooth Damage Quantification" SAE Commercial Vehicle Engineering Congress and Exhibition Conference, Paper 2008-01-2631, October 7-9, 2008.
  7. N A. Abdel-Halim, "The prediction of Loaded Static Tooth Behavior for Straight Bevel Gear", Ain Shams Journal of Mechanical Engineering, ASJME, Vol. 2, April 2009.
  8. Eid O. A. Abd Elmaksoud, El Adl M. Rabeih, N A Abdel-halim, Samir M. El Demerdash, “Investigation of the Torsional Vibration of Automatic Transmission System with Simple Planetary Gear Set during the Engagement”, Engineering Research Journal, Helwan University, Faculty of Engineering Mataria-Cairo. AT14-AT1, volume 127, September 2010.
  9. Eid O. A. Abd Elmaksoud, El Adl M. Rabeih, N A. Abdel-halim, Samir M. El Demerdash" Investigation of Torsional Vibration for Different Configurations of Automotive Automatic Transmission Systems During the Engagement Period”, Ain Shams Journal of Mechanical Engineering, ASJME, Volume 2, October 2010.
  10. Eid O. A. Abd Elmaksoud, El Adl M. Rabeih, N A. Abdel-halim, Samir M. El Demerdash, “Investigation of Self Excited Torsional Vibrations for Different Configurations of Automotive Automatic Transmission Systems During the Engagement Period”, Ain Shams Journal of Mechanical Engineering, ASJME, Vol. 1, pp. 79-88 October 2010.
  11. Eid O. A. Abd Elmaksoud, El Adl M. Rabeih, N A Abdel-halim, Samir M. El Demerdash, “Investigation of Self Excited Torsional Vibrations of Different Configurations of Automatic Transmission Systems during Engagement”, J. of Engineering; Vol. 3, May 10, 2011.
  12. N. A. Abdel-Halim, “Study of Stress Sources and Critical Stress Combinations for the Input Shaft of a Longitudinally Mounted Four Speed Automotive Automatic Transmission Model”, Modern Mechanical Engineering; Vol. 3, No. 1, February 2013.
  13. Nagwa Ahmed Abdel-Halim, “Use of Vehicle Power-Train Simulation with AMT for Fuel Economy and Performance”, Modern Mechanical Engineering; Vol. 3, No.3, August 2013.
  14. Nagwa A. Abdel-halim, “Reflection of Truck Loads Distribution Methods on the Truck Wheels Reaction Forces”, American Journal of Engineering, Technology and Society; Vol. 2, No. 4, May 30, 2015.
  15. Nagwa A. Abdel-halim, Mohamed M. M. Abdel-hafiz, “Stress and Strain Analysis for a Ladder Truck Chassis”, American Journal of Engineering, Technology and Society; Vol. 2, No.6, October 13, 2015.
  16. Nagwa Ahmed Abdel-Halim, “Dynamic Stress and Strain Analysis for 8x4 Truck Frame”, Mechanics, Materials Science & Engineering Journal (MMSE Journal) Vol. 4, May 2016.
  17. Eid Saber Mohamed, Shawki Abdelhady Abouel-seoud, Nagwa Ahmed Abdel-halim, Mohamed Mahmoud Abdel-hafiz, “Evaluation of Driveability Performance for an in-Use Microbus Equipped with Diesel/CNG Engines”, American Journal of Engineering, Technology and Society; ISSN: 2381-6171 (print); ISSN: 2381-618 (online), Vol.4, No.5, pp. 44-56, Aug 2, 2017. http://www.openscienceonline.com/journal/ajets
  18. Nagwa Ahmed Abdel-Halim, Mohamed Watany Mohamed Elsid, “Reflection of Truck Adjustable Wheel Angles on the Frame’s Stresses and Strains in Turning”, American Journal of Engineering, Technology and Society; ISSN: 2381-6171 (print); ISSN: 2381-618 (online), Vol. 4, No. 6, pp. 89-99, October 20, 2017. http://www.openscienceonline.com/journal/ajets
  19. Shawki Abdelhady Abouel-seoud, Mohamed Watany Mohamed Elsid, Nagwa Ahmed Abdel-halim, Eid Saber Mohamed, Ahmed Sultan Abdallah, “Index Noise Comfort Inside a Vehicle for the Passengers from Tire/Road Interaction”, International Journal of Public Health and Health Systems; Vol. 2, No. 2, pp. 26-36, January 8, 2018. http://www.openscienceonline.com/journal/ijphhs
  20. Shawki Abdelhady Abouel-seoud, Mohamed Watany Mohamed Elsid, Nagwa Ahmed Abdel-halim, Eid Saber Mohamed, Ahmed Sultan Abdallah, “Evaluation of Vibro-Acoustics Comfort Criterion Inside a Vehicle Manifested from Interaction of Tire/Road”, International Journal of Public Health and Health Systems; Vol. 3, No. 1, pp. 1-13, January 8, 2018. http://www.openscienceonline.com/journal/ijphhs
  21. Nagwa Ahmed Abdel-halim, “Investigation of Critical Stress Combinations for Turbine Input Shaft of Transaxle Automotive Automatic Transmission”, American Journal of Mechanical Engineering and Automation, Vol. 4, No. 2, pp. 13-20, February 3, 2018. http://www.openscienceonline.com/journal/ajmea
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top