Mechanical Engineering Department, Hamirpur, India. - Articles

Thermal Sprayed CNT Reinforced Nanocomposite Coatings – A Review (Articles)

Manoj Kumar Singla, Harpreet Singh, Vikas Chawla

J. of Minerals and Materials Characterization and Eng. Vol.10 No.8，June 27, 2011

DOI: 10.4236/jmmce.2011.108056 9,744 Downloads 14,243 Views Citations
Mechanical and Machining Properties Analysis of Al6061-Cu-Reinforced SiC_P Metal Matrix Composite (Articles)

Serajul Haque, Prem Kumar Bharti, Akhtar Hussain Ansari

J. of Minerals and Materials Characterization and Eng. Vol.2 No.1，January 17, 2014

DOI: 10.4236/jmmce.2014.21009 6,510 Downloads 8,916 Views Citations
Studies on the Internal Ballistics of Composite Solid Rocket Propellants Incorporating Nano-Structured Catalysts (Articles)

Mukesh R., Sivasubramaniyam R., Elangovan R. R., Abhinaya Sree R., Harish R., Rajashree D., Satish Kumar Kanhar

Advances in Aerospace Science and Technology Vol.2 No.4，December 19, 2017

DOI: 10.4236/aast.2017.24005 2,420 Downloads 7,099 Views Citations
Assessment of Cutting Parameters Influencing on Thrust Force and Torque during Drilling Particulate Filled Glass Fabric Reinforced Epoxy Composites (Articles)

Bhadrabasol Revappa Raju, Bheemappa Suresha, Ragera Parameshwarappa Swamy, Bannangadi Swamy Gowda Kanthraju

J. of Minerals and Materials Characterization and Eng. Vol.1 No.3，May 24, 2013

DOI: 10.4236/jmmce.2013.13019 5,427 Downloads 8,094 Views Citations
Investigations on Mechanical and Tribological Behaviour of Particulate Filled Glass Fabric Reinforced Epoxy Composites (Articles)

Bhadrabasol Revappa Raju, Bheemappa Suresha, Ragera Parameshwarappa Swamy, Bannangadi Swamy Gowda Kanthraju

J. of Minerals and Materials Characterization and Eng. Vol.1 No.4，July 23, 2013

DOI: 10.4236/jmmce.2013.14027 4,310 Downloads 6,804 Views Citations
Analytical Estimation of Elastic Properties of Polypropylene Fiber Matrix Composite by Finite Element Analysis (Articles)

Bhaskar Pal, Mohamed Riyazuddin Haseebuddin

Advances in Materials Physics and Chemistry Vol.2 No.1，March 19, 2012

DOI: 10.4236/ampc.2012.21004 10,666 Downloads 17,566 Views Citations
FEM Simulation and Experimental Validation of Cold Forging Behavior of LM6 Base Metal Matrix Composites (Articles)

Hillol Joardar, Goutam Sutradhar, Nitai Sundar Das

J. of Minerals and Materials Characterization and Eng. Vol.11 No.10，October 31, 2012

DOI: 10.4236/jmmce.2012.1110100 5,929 Downloads 7,757 Views Citations
Thermal Conductivity Enhancement of Epoxy by Hybrid Particulate Fillers of Graphite and Silicon Carbide (Articles)

Krishnamachar Srinivas, Mysore Siddalingappa Bhagyashekar

J. of Minerals and Materials Characterization and Eng. Vol.3 No.2，March 5, 2015

DOI: 10.4236/jmmce.2015.32010 4,462 Downloads 6,359 Views Citations
Effect of Core Thickness and Core Density on Low Velocity Impact Behavior of Sandwich Panels with PU Foam Core (Articles)

Sunith Babu Loganathan, Hanumanahally Kambada Shivanand

J. of Minerals and Materials Characterization and Eng. Vol.3 No.3，May 4, 2015

DOI: 10.4236/jmmce.2015.33019 4,015 Downloads 5,452 Views Citations
Comparative Study of Different Materials with Al-Sic for Engine Valve Guide by Using FEM (Articles)

Hemendra Kumar Srivastava, Arurendra Singh Chauhan, Manmohan Kushwaha, Amaan Raza, Prashantkr Bhardwaj, Vaibhav Raj

World Journal of Engineering and Technology Vol.4 No.2，May 17, 2016

DOI: 10.4236/wjet.2016.42023 3,018 Downloads 5,106 Views Citations
Optimization of Wear Factors of Aluminium Hybrid Metal Matrix Composites Using Taguchi Method (Articles)

P. B. Asha, Sneha Sarika Murthy, C. R. Prakash Rao, V. Ravi Kumar, R. Kiran, C. N. Suresha

J. of Minerals and Materials Characterization and Eng. Vol.9 No.1，January 14, 2021

DOI: 10.4236/jmmce.2021.91003 678 Downloads 2,413 Views Citations
A Comparative Study of Thumba Seed Bio Diesel (Articles)

Shiv Lal, V. K Gorana, N. L Panwar

Journal of Environmental Protection Vol.2 No.4，June 27, 2011

DOI: 10.4236/jep.2011.24052 6,217 Downloads 11,015 Views Citations
Energy Parameter Correlation of Failure Life Data between Cyclic Ball Indentation and Low Cycle Fatigue (Articles)

Aneesh Bangia, Raghu V. Prakash

Open Journal of Metal Vol.2 No.1，March 30, 2012

DOI: 10.4236/ojmetal.2012.21005 4,554 Downloads 9,636 Views Citations
Machinability Study of Al-5Cu-TiB₂ In-situ Metal Matrix Composites Fabricated by Flux-assisted Synthesis (Articles)

A. Mahamani

J. of Minerals and Materials Characterization and Eng. Vol.10 No.13，November 1, 2011

DOI: 10.4236/jmmce.2011.1013097 3,956 Downloads 6,256 Views Citations
Study of Potentiodynamic Polarization Behaviour of Electroless Ni-B Coatings and Optimization using Taguchi Method and Grey Relational Analysis (Articles)

Suman Kalyan Das, Prasanta Sahoo

J. of Minerals and Materials Characterization and Eng. Vol.10 No.14，November 25, 2011

DOI: 10.4236/jmmce.2011.1014103 6,597 Downloads 9,025 Views Citations
Analysis of Tool Wear Rate in Drilling Operation using Scanning Electron Microscope (SEM) (Articles)

Anil Jindal

J. of Minerals and Materials Characterization and Eng. Vol.11 No.1，January 20, 2012

DOI: 10.4236/jmmce.2012.111004 9,979 Downloads 12,787 Views Citations
Finite Element Modeling of Stress Strain Curve and Micro Stress and Micro Strain Distributions of Titanium Alloys— A Review (Articles)

Gangi Setti Srinivasu, Narasimha Rao Raja

J. of Minerals and Materials Characterization and Eng. Vol.11 No.10，October 31, 2012

DOI: 10.4236/jmmce.2012.1110094 7,200 Downloads 9,987 Views Citations
Study of various molar crown designs and their assessment (Articles)

Rashmi Uddanwadiker

Journal of Biomedical Science and Engineering Vol.5 No.11，November 26, 2012

DOI: 10.4236/jbise.2012.511077 3,948 Downloads 5,892 Views Citations
Fabrication and Characterizations of Mechanical Properties of Al-4.5%Cu/10TiC Composite by In-situ Method (Articles)

Anand Kumar, Manas Mohan Mahapatra, Pradeep Kumar Jha

J. of Minerals and Materials Characterization and Eng. Vol.11 No.11，November 30, 2012

DOI: 10.4236/jmmce.2012.1111113 7,252 Downloads 10,470 Views Citations
Dispersion and Performance Properties of Carbon Nanotubes (CNTs) Based Polymer Composites: A Review (Articles)

Bhagwan F. Jogi, Mayur Sawant, Madan Kulkarni, Prakash K. Brahmankar

Journal of Encapsulation and Adsorption Sciences Vol.2 No.4，December 31, 2012

DOI: 10.4236/jeas.2012.24010 12,041 Downloads 20,884 Views Citations

<...345 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies