Interfacial Crack - Articles - Scientific Research Publishing

Study on Acoustic Emission Characteristics of Deformation Damage Process of Zirconia Ceramics (Articles)

Qingchuan Fu, Yushu Lai

Journal of Materials Science and Chemical Engineering Vol.12 No.2，February 27, 2024

DOI: 10.4236/msce.2024.122005 150 Downloads 396 Views Citations
Crack Width Comparison between ACI 318, Eurocode 2 and GB 50010 for Flexural RC Members (Articles)

Guoqiang Liu, Zhiyong Lu

Open Journal of Civil Engineering Vol.14 No.1，March 27, 2024

DOI: 10.4236/ojce.2024.141006 261 Downloads 1,597 Views Citations
Fracture Toughness Studies of Polypropylene- Clay Nanocomposites and Glass Fibre Reinfoerced Polypropylene Composites (Articles)

A. Ramsaroop, K. Kanny, T. P. Mohan

Materials Sciences and Applications Vol.1 No.5，December 1, 2010

DOI: 10.4236/msa.2010.15044 8,252 Downloads 16,727 Views Citations
Finite Element Modeling of Crack Tip Blunting for Estimation of Energy Release Rate Component of Mode I Crack near a Strength Mismatched Interface (Articles)

Sunil Bhat, Vijay G. Ukadgaonker

Applied Mathematics Vol.4 No.5A，May 21, 2013

DOI: 10.4236/am.2013.45A001 4,913 Downloads 7,771 Views Citations
This article belongs to the Special Issue on Finite Element Method
Effect Analysis of Gurson Model Parameters on Crack Extension of Pipeline (Articles)

Tieping Li, Xinlu Tian

Journal of Applied Mathematics and Physics Vol.1 No.6，December 3, 2013

DOI: 10.4236/jamp.2013.16011 3,700 Downloads 5,362 Views Citations
Numerical Simulation of the Behavior of Cracked Reinforced Concrete Members (Articles)

Pietro Croce, Paolo Formichi

Materials Sciences and Applications Vol.5 No.12，October 21, 2014

DOI: 10.4236/msa.2014.512090 5,098 Downloads 6,676 Views Citations
Determination of the Fracture Toughness of Optomechanical Devices (Articles)

George A. Kurilenko, Valerik S. Ayrapetyan

Optics and Photonics Journal Vol.6 No.11，November 14, 2016

DOI: 10.4236/opj.2016.611030 1,365 Downloads 2,519 Views Citations
On the Relation of Grain Orientation and Opening Crack of an Al-Cu-Mg Sheet (Articles)

Cai Hu

Engineering Vol.9 No.5，May 31, 2017

DOI: 10.4236/eng.2017.95031 1,594 Downloads 2,998 Views Citations
Theoretical Analysis and Experimental Verification of Crack Initiation Characteristics of Compression-Shear Plane Crack with Hydraulic Pressure (Articles)

Yajuan Xie, Song Yu, Bangxiang Li, Ziyao Xu, Weishen Zhu

World Journal of Mechanics Vol.8 No.9，September 29, 2018

DOI: 10.4236/wjm.2018.89028 928 Downloads 1,877 Views Citations
Numerical Comparison Research on the Solution of Stress Intensity Factors of Multiple Crack Problems (Articles)

Guo Zhao

Advances in Pure Mathematics Vol.10 No.12，December 22, 2020

DOI: 10.4236/apm.2020.1012044 370 Downloads 1,005 Views Citations
Fatigue Crack Arrest in Mild Steel via Iron Electroplating (Articles)

Jiaming Huang, Henry Cardenas

Materials Sciences and Applications Vol.12 No.11，November 15, 2021

DOI: 10.4236/msa.2021.1211032 301 Downloads 1,443 Views Citations
A Biophysical Approach to SARS-CoV-2 Pathogenicity (Articles)

Claudio Messori

Open Access Library Journal Vol.8 No.12，December 27, 2021

DOI: 10.4236/oalib.1108183 120 Downloads 1,896 Views Citations
The Comparative Study of Fatigue Crack Propagation Experiment and Computer Simulation on the Component Materials for the Crane Life Remained (Articles)

Sangyeol Kim, Hyungsub Bae, Myeongkwan Park, Seongsoo Kim, Hanshik Chung, Heekyu Choi

Low Carbon Economy Vol.2 No.1，March 9, 2011

DOI: 10.4236/lce.2011.21004 6,832 Downloads 15,071 Views Citations
Fatigue Crack Growth on Double Butt Weld with Toe Crack of Pipelines Steel (Articles)

Féthi Hadjoui, Mustapha Benachour, Mohamed Benguediab

Materials Sciences and Applications Vol.3 No.9，September 26, 2012

DOI: 10.4236/msa.2012.39085 6,376 Downloads 10,099 Views Citations
Evolution of Internal Crack in BCC Fe under Compressive Loading (Articles)

Dongbin Wei, Zhengyi Jiang, Jingtao Han

Journal of Modern Physics Vol.3 No.10，October 31, 2012

DOI: 10.4236/jmp.2012.310197 3,665 Downloads 5,671 Views Citations
Analysis of the Tracer Diffusion Phenomena through Cracks in the Porous Media by Means of X-Ray CT (Articles)

Akira Sato

Materials Sciences and Applications Vol.4 No.8A，August 14, 2013

DOI: 10.4236/msa.2013.48A003 4,583 Downloads 6,414 Views Citations
This article belongs to the Special Issue on Porous Materials
Analytical Solutions of a Symmetrical Dynamic Crack Model of Bridging Fibers in Unidirectional Composites (Articles)

Nianchun Lü, Yunhong Cheng, Yuntao Wang, Jin Cheng

World Journal of Mechanics Vol.3 No.5A，August 23, 2013

DOI: 10.4236/wjm.2013.35A004 4,654 Downloads 8,103 Views Citations
This article belongs to the Special Issue on Solid Mechanics and Its Applications
Determination of Coke, Pitch and Pores/Cracks in Green Anode by Image Analysis (Articles)

Dipankar Bhattacharyay, Duygu Kocaefe, Yasar Kocaefe, Brigitte Morais

J. of Surface Engineered Materials and Advanced Technology Vol.3 No.3A，September 25, 2013

DOI: 10.4236/jsemat.2013.33A001 7,069 Downloads 9,649 Views Citations
This article belongs to the Special Issue on Surface Characterization Techniques
The Heat Treatment Behavior of Super-High Strength Aluminum Alloys by Spray Forming (Articles)

Guowei Zhang, Zheng Chen, Xiurong Zhu, Gang Chen, Jing Zhai, Anzhen Guo

Journal of Materials Science and Chemical Engineering Vol.1 No.5，November 7, 2013

DOI: 10.4236/msce.2013.15012 3,742 Downloads 6,716 Views Citations
Analytical Solutions of Dynamic Crack Models of Bridging Fiber Pull-Out in Unidirectional Composite Materials (Articles)

Yuntao Wang, Yunhong Cheng, Nianchun Lü, Jin Cheng

Modern Mechanical Engineering Vol.3 No.4，November 29, 2013

DOI: 10.4236/mme.2013.34026 4,046 Downloads 5,898 Views Citations

<...234 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies