Department of Mechanical Engineering, G. E. C., Hassan, India - Articles

Wavelet Optimized Adaptive Mesh for MHD Flow Problems (Articles)

Bani Singh, Anuj Bhardwaj, Rashid Ali

Applied Mathematics Vol.3 No.2, February 23, 2012

DOI: 10.4236/am.2012.32020 4,392 Downloads 7,881 Views Citations
Design and Implementation of Efficient Reversible Arithmetic and Logic Unit (Articles)

Subramanian Saravanan, Ila Vennila, Sudha Mohanram

Circuits and Systems Vol.7 No.6, May 11, 2016

DOI: 10.4236/cs.2016.76054 3,064 Downloads 4,754 Views Citations
Design and Implementation of an Efficient Reversible Comparator Using TR Gate (Articles)

Subramanian Saravanan, Ila Vennila, Sudha Mohanram

Circuits and Systems Vol.7 No.9, July 27, 2016

DOI: 10.4236/cs.2016.79223 2,367 Downloads 4,662 Views Citations
Design and Performance Analysis of an Innovative Single Basin Solar NanoStill (Articles)

Moses Koilraj Gnanadason, Palanisamy Senthil Kumar, Vincent H. Wilson, Gajendiran Hariharan, Navaneethakrishnan Shenbaga Vinayagamoorthi

Smart Grid and Renewable Energy Vol.4 No.1, February 26, 2013

DOI: 10.4236/sgre.2013.41012 6,462 Downloads 11,104 Views Citations
Computational Study on Aerodynamic and Thermal Characteristics of a Hot Jet in Parallel Flow (Articles)

Merlin C. Das, Meribeni L. Jungio, N. Haritha, Abhilash Suryan, Heuy Dong Kim

Open Journal of Fluid Dynamics Vol.7 No.3, September 22, 2017

DOI: 10.4236/ojfd.2017.73023 1,102 Downloads 2,428 Views Citations
EDM Studies on Aluminum Alloy-Silicon Carbide Composites Developed by Vortex Technique and Pressure Die Casting (Articles)

M. Kathiresan, T. Sornakumar

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.1, January 20, 2010

DOI: 10.4236/jmmce.2010.91007 9,439 Downloads 16,586 Views Citations
Effect of Electrode Materials on Electric Discharge Machining of 316 L and 17 - 4 PH Stainless Steels (Articles)

Subramanian Gopalakannan, Thiagarajan Senthilvelan

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.7, July 25, 2012

DOI: 10.4236/jmmce.2012.117053 9,382 Downloads 13,942 Views Citations
Experimental Investigation of Dynamic Characteristics of Multilayer PU Foam Sandwich Panels (Articles)

Sourabha S. Havaldar, Ramesh S. Sharma

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.5, August 28, 2013

DOI: 10.4236/jmmce.2013.15031 6,465 Downloads 9,672 Views Citations
Influence of Angle Ply Orientation on Tensile Properties of Carbon/Glass Hybrid Composite (Articles)

M. N. GuruRaja, A. N. HariRao

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.5, September 13, 2013

DOI: 10.4236/jmmce.2013.15036 10,398 Downloads 13,077 Views Citations
Analysis on Multi Responses in Face Milling of Ammc Using Fuzzy-Taguchi Method (Articles)

Madiri Samuel Sukumar, Borra Vijay Sudheer Reddy, P. Venkataramaiah

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.4, June 10, 2015

DOI: 10.4236/jmmce.2015.34028 2,876 Downloads 4,094 Views Citations
Experimental Investigations on Electroless Deposition of Copper on Basalt Fibers (Articles)

S. Ezhil Vannan

Journal of Minerals and Materials Characterization and Engineering Vol.3 No.4, June 17, 2015

DOI: 10.4236/jmmce.2015.34031 2,739 Downloads 4,067 Views Citations
The Role of Corrugation Die Parameters on the Mechanical Properties of Aluminum Alloy (AA 5083) Processed by Repetitive Corrugation and Straightening (Articles)

N. Thangapandian, S. Balasivanandha Prabu

Journal of Materials Science and Chemical Engineering Vol.3 No.7, July 16, 2015

DOI: 10.4236/msce.2015.37028 3,701 Downloads 5,015 Views Citations
A Dynamical Model to Analyze the Influence of Sliding Friction on Motion on a Curve—An Analytical Method (Articles)

Prahlad Kulkarni

Open Journal of Applied Sciences Vol.5 No.8, August 12, 2015

DOI: 10.4236/ojapps.2015.58043 3,057 Downloads 4,223 Views Citations
Effect of Fillers on Mechanical Properties and Fracture Toughness of Glass Fabric Reinforced Epoxy Composites (Articles)

Basappa Hulugappa, Mysuru V. Achutha, Bheemappa Suresha

Journal of Minerals and Materials Characterization and Engineering Vol.4 No.1, January 13, 2016

DOI: 10.4236/jmmce.2016.41001 5,828 Downloads 10,232 Views Citations
The Design of a Novel Bearing Manufacturing Line Based on Simulation (Articles)

Abeshek Ram Natarajan

American Journal of Operations Research Vol.6 No.6, October 28, 2016

DOI: 10.4236/ajor.2016.66039 2,338 Downloads 4,586 Views Citations
Effect of Environmental Conditions on Flexural Strength and Fracture Toughness of Particulate Filled Glass-Epoxy Hybrid Composites (Articles)

Basappa Hulugappa, Mysuru Venkataramaiah Achutha, Bheemappa Suresha

Materials Sciences and Applications Vol.7 No.11, November 15, 2016

DOI: 10.4236/msa.2016.711057 1,622 Downloads 3,308 Views Citations
Investigation of Performance and Combustion Characteristics of DI Diesel Engine Fuelled with Ternary Fuel Blend at Different Injection Pressure (Articles)

Pani Sharanappa, Mallinath C. Navindgi

World Journal of Engineering and Technology Vol.5 No.1, February 28, 2017

DOI: 10.4236/wjet.2017.51011 1,954 Downloads 4,683 Views Citations
Grey Relational Optimization of Turning Parameters in Dry Machining of Austenitic Stainless Steel Using Zr Based Coated Tools (Articles)

Kaushik Vijaya Prasad, Kishore Triambak Kashyap, Madapat Job Richard, Posina Gerard Prabhu Rao, Abhishek Rajole, Rabara Hiren

Open Journal of Applied Sciences Vol.7 No.7, July 14, 2017

DOI: 10.4236/ojapps.2017.77027 1,290 Downloads 2,668 Views Citations
In Situ Synthesis of Titanium Carbide in Pure Aluminium (Articles)

Satish Babu Boppana

Journal of Materials Science and Chemical Engineering Vol.8 No.1, December 30, 2019

DOI: 10.4236/msce.2020.81001 987 Downloads 2,985 Views Citations
Influence of Nanocrystalline Structure on Wear and Corrosion Behavior of Al-SiC_P Composite (Articles)

Jagannati Venumurali, Gaddam Bhanodaya Reddy

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.2, March 25, 2020

DOI: 10.4236/jmmce.2020.82004 673 Downloads 1,639 Views Citations

First <...234 ...>Last

	customer@scirp.org
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies