Stamp Forming - Articles - Scientific Research Publishing

Parallel Deformation of the Metals (Articles)

Chetan Nikhare

Modeling and Numerical Simulation of Material Science Vol.3 No.3，July 1, 2013

DOI: 10.4236/mnsms.2013.33010 3,193 Downloads 5,063 Views Citations
Development of Film Forming Agent HN-1 and Its Application in Drilling Fluid (Articles)

Youlin Hu

Geomaterials Vol.3 No.4，October 14, 2013

DOI: 10.4236/gm.2013.34015 3,003 Downloads 5,129 Views Citations
The Heat Treatment Behavior of Super-High Strength Aluminum Alloys by Spray Forming (Articles)

Guowei Zhang, Zheng Chen, Xiurong Zhu, Gang Chen, Jing Zhai, Anzhen Guo

Journal of Materials Science and Chemical Engineering Vol.1 No.5，November 7, 2013

DOI: 10.4236/msce.2013.15012 3,743 Downloads 6,718 Views Citations
Theoretical and Experimental Analysis of Deep Drawing Cylindrical Cup (Articles)

Najmeddin Arab, Abotaleb Javadimanesh

J. of Minerals and Materials Characterization and Eng. Vol.1 No.6，November 26, 2013

DOI: 10.4236/jmmce.2013.16051 6,005 Downloads 10,422 Views Citations
Experimental and Numerical Investigation of Cold Bulge Forming of Titanium Alloy Ti55 (Articles)

S. M. R. Tabatabaei, M. Safari, R. Shahrokh Esfahani, A. Abolghasemian. Sichani, M. Nourjani Pour Moghadam

World Journal of Mechanics Vol.3 No.9，December 10, 2013

DOI: 10.4236/wjm.2013.39035 4,452 Downloads 7,427 Views Citations
Sheet Bending Deformation in Production of Thin-Walled Pipes (Articles)

Tatjana V. Brovman

World Journal of Mechanics Vol.4 No.12，December 22, 2014

DOI: 10.4236/wjm.2014.412035 2,842 Downloads 3,578 Views Citations
Vaporization and Thermodynamics of Glass-Forming Oxide Melts: Mass Spectrometric Study and Modeling (Articles)

V. L. Stolyarova

Journal of Materials Science and Chemical Engineering Vol.3 No.7，July 1, 2015

DOI: 10.4236/msce.2015.37009 3,233 Downloads 4,026 Views Citations
Stretch Forming Simulation of Woven Composites Based on an Orthotropic Non-Linear Material Model (Articles)

N. A. Zanjani, S. Kalyanasundaram

Journal of Materials Science and Chemical Engineering Vol.3 No.7，July 16, 2015

DOI: 10.4236/msce.2015.37023 3,882 Downloads 4,799 Views Citations
Optimization of Leaky Feeder Slot Spacing for Better Beam Forming in Mines and Tunnels (Articles)

Noha Hassan, Wisam F. Farjow, Xavier Fernando

Int'l J. of Communications, Network and System Sciences Vol.9 No.4，April 27, 2016

DOI: 10.4236/ijcns.2016.94007 3,109 Downloads 4,553 Views Citations
Visualization of High-Speed Impact of Penetrator into Icy Target (Articles)

Kojiro Suzuki, Kazuya Namba, Yasumasa Watanabe

Journal of Flow Control, Measurement & Visualization Vol.4 No.2，April 29, 2016

DOI: 10.4236/jfcmv.2016.42006 2,485 Downloads 3,562 Views Citations
Hot Rolling of Large Gears (Articles)

Dirk Landgrebe, Andreas Sterzing, Mike Lahl, Thomas Druwe, Anne Manuela Taubert

Open Access Library Journal Vol.4 No.2，February 22, 2017

DOI: 10.4236/oalib.1103152 987 Downloads 2,948 Views Citations
The Effect of Unloading Positions and Times on Sheet Metal’s Stress-Strain Curve (Articles)

Kunmin Zhao, Wumei Fang, Baotang Wang, Daxin Ren

J. of Minerals and Materials Characterization and Eng. Vol.6 No.3，May 22, 2018

DOI: 10.4236/jmmce.2018.63029 892 Downloads 2,821 Views Citations
The Use of an Innovative Film-Forming Wound Dressing in the Treatment of Radiation Dermatitis during Concomitant Chemotherapy (Articles)

Iratxe Arranz Villandiego, Sara Gonzalez Aramberri

Journal of Cancer Therapy Vol.9 No.12，December 29, 2018

DOI: 10.4236/jct.2018.912086 1,039 Downloads 2,578 Views Citations
Analysis and Design of Different Methods to Reach Optimum Power in Butler Matrix (Articles)

Shahideh Kiehbadroudinezhad, Jean-François Bousquet, Michael Cada, Adib Shahabi, Mohammad Ali Kiehbadroudinezhad

Int'l J. of Communications, Network and System Sciences Vol.12 No.2，February 28, 2019

DOI: 10.4236/ijcns.2019.122003 2,242 Downloads 4,432 Views Citations
Film-Forming Systems in Topically Administered Pharmaceutical Formulations (Articles)

Flora Ferreira Duarte de Oliveira, Livia Rodrigues de Menezes, Maria Inês Bruno Tavares

Materials Sciences and Applications Vol.11 No.8，August 14, 2020

DOI: 10.4236/msa.2020.118038 1,744 Downloads 4,152 Views Citations
Simulation Analysis and Optimization of Rolling Process of Steel Rim (Articles)

Wenhua Lv, Mao Pang, Shunping Li, Miaolong Cao

World Journal of Mechanics Vol.11 No.3，March 26, 2021

DOI: 10.4236/wjm.2021.113004 740 Downloads 2,003 Views Citations
The Pairing Analysis Improvement of Magnetized Structure in Electromagnetic Bulging Process in Case of Tube with Field Shaper (Articles)

Blaise Kevine Lenz Soronga, Zhanqian Zhan, Jing Liu, Jonas Asamoah, Mohamed Bangali Bangura, Matala Makiese, N’kodia Kambani Chrionie, Md Jobayer Hossain, Yongdong Chen

Journal of Electromagnetic Analysis and Applications Vol.16 No.4，April 30, 2024

DOI: 10.4236/jemaa.2024.164004 110 Downloads 487 Views Citations
Forming Stages of Polycrystalline TiN Films Depending on the Nitrogen Concentration in Mixed Gas (Articles)

Anna L. Kameneva

Materials Sciences and Applications Vol.2 No.1，January 25, 2011

DOI: 10.4236/msa.2011.21002 7,859 Downloads 11,595 Views Citations
Comparative Analysis of Parabolic Bootlace Lens and Conventional Lens Approach (Articles)

Ravi Pratap Singh Kushwah, P. K. Singhal

Journal of Electromagnetic Analysis and Applications Vol.3 No.2，March 4, 2011

DOI: 10.4236/jemaa.2011.32011 5,501 Downloads 8,788 Views Citations
A New Way to Improve Thermal Capacities of Lubricants for the Manufacture of Flint Glass Perfume Bottles: Part A—How to Combine Thermal Analysis and Physico-Chemical Observations at the Glass/Punch Interface (Articles)

Philippe Moreau, Dominique Lochegnies, Christine Kermel, Jean-Marc Carpentier, Hugues Vivier

New Journal of Glass and Ceramics Vol.1 No.3，October 19, 2011

DOI: 10.4236/njgc.2011.13013 4,679 Downloads 8,737 Views Citations

<123 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies