Plastic Filler - Articles - Scientific Research Publishing

Zr-Ti-Ni-Cu Amorphous Brazing Fillers Applied to Brazing Titanium TA2 and Q235 Steel (Articles)

Jie Cui, Qiuya Zhai, Jinfeng Xu, Yahui Wang, Jianlin Ye

Materials Sciences and Applications Vol.5 No.11，September 29, 2014

DOI: 10.4236/msa.2014.511082 3,630 Downloads 4,715 Views Citations
Adding Sn on the Performance of Amorphous Brazing Fillers Applied to Brazing TA2 and Q235 (Articles)

Jie Cui, Qiuya Zhai, Jinfeng Xu, Yahui Wang, Jianlin Ye

J. of Surface Engineered Materials and Advanced Technology Vol.4 No.6，October 8, 2014

DOI: 10.4236/jsemat.2014.46038 3,642 Downloads 4,374 Views Citations
This article belongs to the Special Issue on Surface and Interface of Materials
Influence of Nano-Barium Sulfate Agglomeration on Microstructure and Properties of the Hardened Cement-Based Materials (Articles)

Mohamed El-Shahate Ismaiel Saraya, Inas Mostafa Bakr

Journal of Materials Science and Chemical Engineering Vol.3 No.11，November 27, 2015

DOI: 10.4236/msce.2015.311009 3,180 Downloads 4,380 Views Citations
Adherence of Streptococcus mutans and Adsorption of Salivary Protein to Resin Composites Containing S-PRG Fillers (Articles)

Masato Hotta, Daisuke Tamura, Hirotomo Kotake, Shusuke Kusakabe, Taiyu Gen, Kazuki Oike

Open Journal of Stomatology Vol.7 No.3，March 13, 2017

DOI: 10.4236/ojst.2017.73011 1,390 Downloads 2,321 Views Citations
Study of the Mechanical Behaviour of Mortars Modified with Rice Husk Ash (Articles)

Issiaka Sanou, Moustapha Sawadogo, Mohamed Seynou, Lamine Zerbo, Raguilnaba Ouedraogo

J. of Minerals and Materials Characterization and Eng. Vol.7 No.6，October 21, 2019

DOI: 10.4236/jmmce.2019.76025 638 Downloads 2,083 Views Citations
Elaboration and Characterization of a Composite Material Based on Canarium schweinfurthii Engl Cores with a Polyester Matrix (Articles)

Dieunedort Ndapeu, Francis Tamwo, Morino Bernard Nganou Koungang, Ghislain Tchuen, Nicodème R. Sikame Tagne, Sophie Bistac, Ebénezer Njeugna

Materials Sciences and Applications Vol.11 No.3，March 19, 2020

DOI: 10.4236/msa.2020.113014 678 Downloads 1,448 Views Citations
Utilisation of Carbon Capture and Mineralisation Products: Considering Monohydrocalcite as a Potential Functional Filler (Articles)

Roneta Chaliulina

Open Access Library Journal Vol.9 No.12，December 27, 2022

DOI: 10.4236/oalib.1109436 62 Downloads 479 Views Citations
Valorisation of Industrial Waste for the Development of Fire Resistant Material to Be Used as Filler in Paints and Varnishes (Articles)

Konstantinos Miltiadis Sakkas, Christos Georgopoulos, Athanasios Kaforos, Themis Parousis

Open Access Library Journal Vol.10 No.11，November 24, 2023

DOI: 10.4236/oalib.1110773 59 Downloads 264 Views Citations
The Compactions of Elasto-Plastic and Visco-Plastic Granular Assemblies (Articles)

Pengfei He, Yuching Wu, Huiliang Chen

Open Journal of Civil Engineering Vol.3 No.1，March 29, 2013

DOI: 10.4236/ojce.2013.31005 4,085 Downloads 7,162 Views Citations
Measurement of the Energy Absorbed during Nanoscale Deformation of Human Peritubular and Intertubular Dentin (Articles)

Jiahau Yan, Burak Taskonak, John J. Mecholsky Jr.

Materials Sciences and Applications Vol.13 No.4，April 25, 2022

DOI: 10.4236/msa.2022.134010 216 Downloads 1,727 Views Citations
Presence of Microplastic in Personal Care and Cosmetic Products from Markets in Punjab, Pakistan (Articles)

Sajjad Hussain, Nuzhat Sial, Zarqa Nawaz, Muhammad Naeem, Rana Zeeshan Habib, Thies Thiemann

Journal of Environmental Protection Vol.16 No.4，April 22, 2025

DOI: 10.4236/jep.2025.164018 30 Downloads 183 Views Citations
Loop Ileostomy and Colostomy—A Comparison between Supporting Plastic Rods and Epicutaneous or Subcutaneous Silicon Drains (Articles)

Mike Ralf Langenbach, Stefan Sauerland, Eiyad Issa, Claudia Nitschke, Hubert Zirngibl

Surgical Science Vol.2 No.5，July 29, 2011

DOI: 10.4236/ss.2011.25056 7,434 Downloads 12,727 Views Citations
Patients Body Modeling: A Practical Theoretical Experience in Plastic Surgery (Articles)

José Humberto Cardoso Resende, Issacar de Oliveira Costa, Pedro Fernando Huertas Granobles, Rolando Arturo Romero Balcazar, Guilherme Bahia de Carvalho, Hugo Rojas Perdomo, Edmar Moreira Lisbôa, Mohamad Youssef Mohsen, Álváro Sanchez Vargas, Nébia Maria Almeida de Figueiredo

Modern Plastic Surgery Vol.9 No.3，July 31, 2019

DOI: 10.4236/mps.2019.93007 1,137 Downloads 2,277 Views Citations
Leaching of Lead, Chromium and Copper into Drinks Placed in Plastic Cups at Different Conditions (Articles)

Oliver Ahimbisibwe, Denis Byamugisha, Paul Mukasa, Timothy Omara, Emmanuel Ntambi

American Journal of Analytical Chemistry Vol.13 No.2，February 16, 2022

DOI: 10.4236/ajac.2022.132002 326 Downloads 2,244 Views Citations
An Assessment of the Accretion Rate of Pollutants, Chemical Risk and Pollution Load Index on Microplastics in the Coastal Waters of Limbe-Idenau, Cameroon: Using Gravimetric Analysis (Articles)

Eric Ndumbe Esongami, Veronica Ebot Manga, Josepha Tendo Foba, Eric Fongoh Ngwa

Journal of Geoscience and Environment Protection Vol.13 No.5，May 30, 2025

DOI: 10.4236/gep.2025.135017 24 Downloads 124 Views Citations
A Microwave-Based Invisible “Watermarking” Emulated by an Embedded Set of Electromagnetic Material in a Plastic Card (Articles)

Perambur Neelakanta, Swee-Hock Lim

Journal of Electromagnetic Analysis and Applications Vol.2 No.3，April 12, 2010

DOI: 10.4236/jemaa.2010.23018 5,128 Downloads 8,974 Views Citations
Plastic Flow Macrolocalization: Autowave and Quasi-Particle (Articles)

Lev B. Zuev, Svetlana A. Barannikova

Journal of Modern Physics Vol.1 No.1，May 7, 2010

DOI: 10.4236/jmp.2010.11001 5,617 Downloads 10,816 Views Citations
Assessment of Some Nigerian Coals for Metallurgical Application (Articles)

I. O. Akpabio, M. M. Chagga, A. Jauro

J. of Minerals and Materials Characterization and Eng. Vol.7 No.4，December 20, 2008

DOI: 10.4236/jmmce.2008.74023 6,253 Downloads 7,877 Views Citations
Effects of Variation of Some Process Variables on Recrystallization Rate of Aluminium Alloy (6063) (Articles)

O.E. Olorunniwo, P.O. Atanda, K.J. Akinluwade

J. of Minerals and Materials Characterization and Eng. Vol.8 No.1，January 20, 2009

DOI: 10.4236/jmmce.2009.81001 5,946 Downloads 8,173 Views Citations
On Plastic Notch Effects in Quenched and Tempered Steels (Articles)

Pasquale Russo Spena, Donato Firrao, Paolo Matteis

J. of Minerals and Materials Characterization and Eng. Vol.9 No.6，June 20, 2010

DOI: 10.4236/jmmce.2010.96035 5,921 Downloads 7,325 Views Citations

<123 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies