Department of Materials and Metallurgical Engineering, University of Lagos. - Articles

Effects of Graphite Additions and Heat Treatment on the Microstructure, Mechanical and Tribological Properties of 13% Chromium White Iron (Articles)

J. O. Agunsoye, S. A. Bello, I. O. Awe, A. A. Yekinni, R. G. Adeyemo, A. O. Ologunagba

J. of Minerals and Materials Characterization and Eng. Vol.2 No.4，July 10, 2014

DOI: 10.4236/jmmce.2014.24032 2,741 Downloads 3,857 Views Citations
Fabrication of End Quenched Machine: Hardenability Evaluation (Articles)

A. A. Yekinni, J. O. Agunsoye, S. A. Bello, I. O. Awe, S. I. Talabi

J. of Minerals and Materials Characterization and Eng. Vol.2 No.2，March 14, 2014

DOI: 10.4236/jmmce.2014.22014 5,646 Downloads 8,149 Views Citations
Models for Assessment and Computational Analysis of Hardness of the Heat Affected Zone in Water Cooled Aluminum Weldment (Articles)

C. I. Nwoye, C. N. Anyakwo, E. Obidiegwu, N. E. Nwankwo

J. of Minerals and Materials Characterization and Eng. Vol.10 No.8，June 27, 2011

DOI: 10.4236/jmmce.2011.108055 4,715 Downloads 5,936 Views Citations
Review of Green Polymer Nanocomposites (Articles)

Samson O. Adeosun, G. I. Lawal, Sambo A. Balogun, Emmanuel I. Akpan

J. of Minerals and Materials Characterization and Eng. Vol.11 No.4，April 20, 2012

DOI: 10.4236/jmmce.2012.114028 13,446 Downloads 22,197 Views Citations
Strength Characteristics of Inoculated and Nodularised Thin Wall Ductile Iron Castings (Articles)

Ezenwanyi Fidelia Ochulor, Samson Oluropo Adeosun, Mohammed Olawale Hakeem Amuda, Sanmbo Adewale Balogun

J. of Minerals and Materials Characterization and Eng. Vol.3 No.2，March 16, 2015

DOI: 10.4236/jmmce.2015.32012 4,860 Downloads 6,411 Views Citations
Mechanical and Microstructural Evaluation of Plastically Deformed Brass (Articles)

Muideen Adebayo Bodude, Ibrahim Momohjimoh, Ruth Nkiruka Nnaji

Materials Sciences and Applications Vol.6 No.12，December 21, 2015

DOI: 10.4236/msa.2015.612112 6,201 Downloads 7,490 Views Citations
Microstructure and Mechanical Properties of Ceramic Composites (Articles)

V.S. Aigbodion, J. O. Agunsoye, V. Kalu, F. Asuke, S. Ola

J. of Minerals and Materials Characterization and Eng. Vol.9 No.6，June 20, 2010

DOI: 10.4236/jmmce.2010.96037 7,509 Downloads 10,430 Views Citations
Model for Quantitative Evaluation and Prediction of the Concentration of Phosphorus Removed during Pyro-Hydro Beneficiation of Haematite (Articles)

C. I. Nwoye, M. C. Menkiti, E. Obidiegwu, N. E. Nwankwo

J. of Minerals and Materials Characterization and Eng. Vol.10 No.7，June 6, 2011

DOI: 10.4236/jmmce.2011.107049 4,800 Downloads 5,975 Views Citations
Potential of Tin Tailings an Industrial Waste for Refractory Materials (Articles)

V.S. Aigbodion, A. AbdulRasheed, S.O. Olajide, J.O. Agunsoye, I.Y. Sulaiman

J. of Minerals and Materials Characterization and Eng. Vol.9 No.2，February 20, 2010

DOI: 10.4236/jmmce.2010.92011 4,708 Downloads 6,610 Views Citations
Evaluation of Cost Effectiveness of Onibode Fire-Clay for Production of High Quality Refractory Bricks (Articles)

David Ehigie Esezobor, Friday Ichifu Apeh, Mfon Okon Udo, Mustapha Fabiyi, Enebi Solomon Apeh

J. of Minerals and Materials Characterization and Eng. Vol.3 No.5，August 26, 2015

DOI: 10.4236/jmmce.2015.35042 6,164 Downloads 7,354 Views Citations
Effect of Groundnut Shell Powder on the Mechanical Properties of Recycled Polyethylene and Its Biodegradability (Articles)

Mohammed Awwalu Usman, Ibrahim Momohjimoh, Abdulahi S. B. Gimba

J. of Minerals and Materials Characterization and Eng. Vol.4 No.3，May 30, 2016

DOI: 10.4236/jmmce.2016.43021 4,550 Downloads 8,082 Views Citations
Utilisation of Indigenous Ceramic Raw Materials for the Production of Water Closet (Articles)

Z. U. Elakhame, Y. J. Obe, Y. L. Shuaib-Babata, L. K. Bankole, O. J. Omowunmi, I. O. Ambali, O. O. Akinsanya, A. J. Unachukwu, R. G. Adeyemo, M. Ikusedun

J. of Minerals and Materials Characterization and Eng. Vol.8 No.5，August 12, 2020

DOI: 10.4236/jmmce.2020.85023 525 Downloads 2,708 Views Citations
Characterization of Spent Household Zinc-Carbon Dry Cell Batteries in the Process of Recovery of Value Metals (Articles)

Majharul Haque Khan, A.S.W Kurny

J. of Minerals and Materials Characterization and Eng. Vol.11 No.6，June 15, 2012

DOI: 10.4236/jmmce.2012.116047 7,772 Downloads 10,271 Views Citations
Model for Predicting the Initial Solution pH at Pre-Assumed Final pH and Concentration of Dissolved Zinc during Leaching of Galena in Butanoic Acid Solution (Articles)

C. I. Nwoye

J. of Minerals and Materials Characterization and Eng. Vol.8 No.8，August 20, 2009

DOI: 10.4236/jmmce.2009.88054 5,275 Downloads 6,511 Views Citations
Model for Predicting the Quantity of Water Evaporated during Initial Stage Drying of Wet Clay Designated for Production of Bricks (Articles)

C. I. Nwoye

J. of Minerals and Materials Characterization and Eng. Vol.8 No.8，August 20, 2009

DOI: 10.4236/jmmce.2009.88056 5,525 Downloads 7,069 Views Citations
Potential Utilization of Solid Waste (Bagasse Ash) (Articles)

V. S. Aigbodion, S. B. Hassan, T. Ause, G.B. Nyior

J. of Minerals and Materials Characterization and Eng. Vol.9 No.1，January 20, 2010

DOI: 10.4236/jmmce.2010.91006 8,631 Downloads 13,281 Views Citations
Effect of Precipitation Hardening on Hardness and Microstructure of Austenitic Manganese Steel (Articles)

S. Aribo, K.K. Alaneme, D.O. Folorunso, F.O. Aramide

J. of Minerals and Materials Characterization and Eng. Vol.9 No.2，February 20, 2010

DOI: 10.4236/jmmce.2010.92014 7,638 Downloads 10,885 Views Citations
The Development of Mathematical Model for the Prediction of Ageing Behaviour for Al-Cu-Mg/Bagasse Ash Particulate Composites (Articles)

V.S. Aigbodion, S.B. Hassan, E.T. Dauda, R.A. Mohammed

J. of Minerals and Materials Characterization and Eng. Vol.9 No.10，October 20, 2010

DOI: 10.4236/jmmce.2010.910066 5,258 Downloads 7,140 Views Citations
Corrosion Behavior of Alumina Reinforced Aluminium (6063) Metal Matrix Composites (Articles)

K. K. Alaneme, M. O. Bodunrin

J. of Minerals and Materials Characterization and Eng. Vol.10 No.12，October 10, 2011

DOI: 10.4236/jmmce.2011.1012088 12,185 Downloads 18,790 Views Citations
Effects of Austenitising Conditions on the Microstructures and Mechanical Properties of Martensitic Steel with Dual Matrix Structure (Articles)

K.A. Bello, S.B. Hassan, O. Aponbiede

J. of Minerals and Materials Characterization and Eng. Vol.11 No.1，January 20, 2012

DOI: 10.4236/jmmce.2012.111006 6,358 Downloads 8,408 Views Citations

<123 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies