Surface roughness - Articles - Scientific Research Publishing

Understanding of Ultrasonic Assisted Machining with Diamond Grinding Tool (Articles)

Kyung-Hee Park, Yun-Hyuck Hong, Kyeong-Tae Kim, Seok-Woo Lee, Hon-Zong Choi, Young-Jae Choi

Modern Mechanical Engineering Vol.4 No.1，December 30, 2013

DOI: 10.4236/mme.2014.41001 7,494 Downloads 15,227 Views Citations
Comparative Response of CRL-11372 Cells to Surface Roughness and Crystalline Structure of the Surfaces Developed by Sandblasting, Etching, and TiO₂ Coating on Commercially Pure Ti Discs (Articles)

Sinem Yeniyol, Bahadır Kepenek, Ayhan Bilir, Ali Fuat Çakır, Nilüfer Bölükbaşı, Mefail Yeniyol, Tayfun Özdemir

Materials Sciences and Applications Vol.5 No.5，March 31, 2014

DOI: 10.4236/msa.2014.55029 3,385 Downloads 5,300 Views Citations
Comparative Assessment on Machinability of Nano-Structured Bainitic Steel and Titanium64 (Articles)

Ashwin Polishetty, Chinmay Sonavane, Prasad Patil, Guy Littlefair

Journal of Materials Science and Chemical Engineering Vol.2 No.7，July 8, 2014

DOI: 10.4236/msce.2014.27004 2,470 Downloads 3,913 Views Citations
Dependence of Atomic-Scale Si(110) Surface Roughness on Hydrogen Introduction Temperature after High-Temperature Ar Annealing (Articles)

Koji Araki, Ryuji Takeda, Haruo Sudo, Koji Izunome, Xinwei Zhao

J. of Surface Engineered Materials and Advanced Technology Vol.4 No.5，August 6, 2014

DOI: 10.4236/jsemat.2014.45028 4,647 Downloads 5,852 Views Citations
This article belongs to the Special Issue on Surface Modification
Numerical and Experimental Study of the Roughness Effects on Mechanical Properties of AISI316L by Nanoindentation (Articles)

Ling Chen, Aylin Ahadi, Jinming Zhou, Jan-Eric Ståhl

Modeling and Numerical Simulation of Material Science Vol.4 No.4，October 10, 2014

DOI: 10.4236/mnsms.2014.44017 5,433 Downloads 6,873 Views Citations
Surface Roughness Modification of Free Standing Single Crystal Silicon Microstructures Using KrF Excimer Laser Treatment for Mechanical Performance Improvement (Articles)

Mohamed Elwi Mitwally, Toshiyuki Tsuchiya, Osamu Tabata, Sherif Sedky

J. of Surface Engineered Materials and Advanced Technology Vol.5 No.1，January 6, 2015

DOI: 10.4236/jsemat.2015.51004 3,593 Downloads 4,620 Views Citations
This article belongs to the Special Issue on Surface and Interface of Materials
Studying the Preheating Effect on Certain Mechanical Properties of the Coating Layer by Vacuum Ion Plasma Coating (Articles)

Abdul Jaleel Hamad Majeed

Modern Mechanical Engineering Vol.5 No.4，November 11, 2015

DOI: 10.4236/mme.2015.54010 4,330 Downloads 5,309 Views Citations
Evaluation of Surface Roughness of Metal and Alloy Material (Articles)

Joon-Seong Lee

Journal of Materials Science and Chemical Engineering Vol.4 No.1，January 11, 2016

DOI: 10.4236/msce.2016.41013 4,330 Downloads 6,653 Views Citations
Determining the Effect of Cutting Fluids on Surface Roughness in Turning AISI 1330 Alloy Steel Using Taguchi Method (Articles)

Onyemachi Joachim Onuoha, James Oseni Abu, Sunday Albert Lawal, Edeki Mudiare, Michael Bolaji Adeyemi

Modern Mechanical Engineering Vol.6 No.2，May 5, 2016

DOI: 10.4236/mme.2016.62006 3,914 Downloads 6,838 Views Citations
Neural Network Modeling and Prediction of Surface Roughness in Machining Aluminum Alloys (Articles)

N. Fang, N. Fang, P. Srinivasa Pai, N. Edwards

Journal of Computer and Communications Vol.4 No.5，May 13, 2016

DOI: 10.4236/jcc.2016.45001 2,893 Downloads 4,422 Views Citations
Influence of Abrasive Waterjet Machining Parameters on the Surface Texture Quality of Carrara Marble (Articles)

Mohammad S. Alsoufi, Dhia K. Suker, Mohammed W. Alhazmi, Sufyan Azam

J. of Surface Engineered Materials and Advanced Technology Vol.7 No.2，April 20, 2017

DOI: 10.4236/jsemat.2017.72003 2,418 Downloads 5,020 Views Citations
Scanning Electron Microscopy (SEM) Analysis and Hardness of Diffusion Bonded Titanium-Titanium and Titanium-Copper Plates with Static Force and without Interlayers (Articles)

Joel Hemanth

Open Journal of Composite Materials Vol.7 No.2，April 30, 2017

DOI: 10.4236/ojcm.2017.72007 1,409 Downloads 3,352 Views Citations
Experimentation on Tool Wear and Surface Roughness in AISI D2 Steel Turning with WC Insert (Articles)

N. López-Luiz, O. Jiménez Alemán, F. Alvarado Hernández, M. Montoya Dávila, V. H. Baltazar-Hernández

Modern Mechanical Engineering Vol.8 No.3，August 29, 2018

DOI: 10.4236/mme.2018.83014 1,272 Downloads 3,235 Views Citations
Difference in Surface Roughness of Ethylene-Vinyl-Acetate Sheet before and after Application of Finishing Liquid (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.9 No.13，December 3, 2018

DOI: 10.4236/msa.2018.913071 943 Downloads 1,828 Views Citations
Introduction of Multiscaled Longitudinal Vortices by Fractal-Patterned Surface Roughness (Articles)

Manami Kosuda, Yoshihiro Kubota, Masao Yokoyama, Osamu Mochizuki

Journal of Flow Control, Measurement & Visualization Vol.7 No.2，April 28, 2019

DOI: 10.4236/jfcmv.2019.72010 847 Downloads 1,742 Views Citations
Simulation Analysis of Surface Roughness for Milling Process (Articles)

Bai Liu, Jixuan Yuan, Zhenjiu Zhang

Natural Science Vol.11 No.5，May 9, 2019

DOI: 10.4236/ns.2019.115014 1,066 Downloads 2,368 Views Citations
Laser Polishing of Laser Powder Bed Fusion AlSi10Mg Parts—Influence of Initial Surface Roughness on Achievable Surface Quality (Articles)

Markus Hofele, Andre Roth, Jochen Schanz, David K. Harrison, Anjali K. M. De Silva, Harald Riegel

Materials Sciences and Applications Vol.12 No.1，January 20, 2021

DOI: 10.4236/msa.2021.121002 739 Downloads 2,599 Views Citations
This article belongs to the Special Issue on Material Surface Engineering
Relationship between Lingual Papilla Surface Roughness and Oral Condition in Elderly Individuals (Articles)

Yoko Tada, Junichi Karaki, Junpei Kubota, Yasuaki Kakinoki

Open Journal of Stomatology Vol.11 No.2，February 5, 2021

DOI: 10.4236/ojst.2021.112007 346 Downloads 1,567 Views Citations
Improvement in Surface Roughness and Hardness for Carbon Steel by Slide Burnishing Process (Articles)

Hirotaka Kato, Wataru Hirokawa, Yoshikazu Todaka, Kazufumi Yasunaga

Materials Sciences and Applications Vol.12 No.5，May 8, 2021

DOI: 10.4236/msa.2021.125011 1,181 Downloads 3,034 Views Citations
This article belongs to the Special Issue on Material Processing
Risk Analysis of Cavitation in Hydraulic Structures (Articles)

Gabriel Echávez

World Journal of Engineering and Technology Vol.9 No.3，August 11, 2021

DOI: 10.4236/wjet.2021.93043 295 Downloads 1,450 Views Citations

<123 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies