Filler Loading - Articles - Scientific Research Publishing

Adding Sn on the Performance of Amorphous Brazing Fillers Applied to Brazing TA2 and Q235 (Articles)

Jie Cui, Qiuya Zhai, Jinfeng Xu, Yahui Wang, Jianlin Ye

J. of Surface Engineered Materials and Advanced Technology Vol.4 No.6，October 8, 2014

DOI: 10.4236/jsemat.2014.46038 3,642 Downloads 4,375 Views Citations
This article belongs to the Special Issue on Surface and Interface of Materials
Influence of Nano-Barium Sulfate Agglomeration on Microstructure and Properties of the Hardened Cement-Based Materials (Articles)

Mohamed El-Shahate Ismaiel Saraya, Inas Mostafa Bakr

Journal of Materials Science and Chemical Engineering Vol.3 No.11，November 27, 2015

DOI: 10.4236/msce.2015.311009 3,180 Downloads 4,381 Views Citations
Adherence of Streptococcus mutans and Adsorption of Salivary Protein to Resin Composites Containing S-PRG Fillers (Articles)

Masato Hotta, Daisuke Tamura, Hirotomo Kotake, Shusuke Kusakabe, Taiyu Gen, Kazuki Oike

Open Journal of Stomatology Vol.7 No.3，March 13, 2017

DOI: 10.4236/ojst.2017.73011 1,390 Downloads 2,321 Views Citations
Study of the Mechanical Behaviour of Mortars Modified with Rice Husk Ash (Articles)

Issiaka Sanou, Moustapha Sawadogo, Mohamed Seynou, Lamine Zerbo, Raguilnaba Ouedraogo

J. of Minerals and Materials Characterization and Eng. Vol.7 No.6，October 21, 2019

DOI: 10.4236/jmmce.2019.76025 639 Downloads 2,091 Views Citations
Elaboration and Characterization of a Composite Material Based on Canarium schweinfurthii Engl Cores with a Polyester Matrix (Articles)

Dieunedort Ndapeu, Francis Tamwo, Morino Bernard Nganou Koungang, Ghislain Tchuen, Nicodème R. Sikame Tagne, Sophie Bistac, Ebénezer Njeugna

Materials Sciences and Applications Vol.11 No.3，March 19, 2020

DOI: 10.4236/msa.2020.113014 679 Downloads 1,452 Views Citations
Determination of Levels of Asbestos Fiber in Cosmetic and Non-Cosmetic Products Sold within Enugu Metropolis—Enugu State, Nigeria (Articles)

Onyeka Okeke, Harold Chinedu Okeke, Ernest Ezeh, Charles Chukwubuikem Aniobi, Uchechi Rowland Imoh

Journal of Environmental Protection Vol.11 No.10，October 21, 2020

DOI: 10.4236/jep.2020.1110054 387 Downloads 1,424 Views Citations
Utilisation of Carbon Capture and Mineralisation Products: Considering Monohydrocalcite as a Potential Functional Filler (Articles)

Roneta Chaliulina

Open Access Library Journal Vol.9 No.12，December 27, 2022

DOI: 10.4236/oalib.1109436 62 Downloads 480 Views Citations
Valorisation of Industrial Waste for the Development of Fire Resistant Material to Be Used as Filler in Paints and Varnishes (Articles)

Konstantinos Miltiadis Sakkas, Christos Georgopoulos, Athanasios Kaforos, Themis Parousis

Open Access Library Journal Vol.10 No.11，November 24, 2023

DOI: 10.4236/oalib.1110773 60 Downloads 267 Views Citations
Two Algorithms of Power Loading for MCM System in Nakagami Fading Channel (Articles)

Lev GOLDFELD, Vladimir LYANDRES, Lior TAKO

Int'l J. of Communications, Network and System Sciences Vol.3 No.2，March 1, 2010

DOI: 10.4236/ijcns.2010.32030 4,073 Downloads 7,325 Views Citations
Remote Mapping of Thermodynamic Index of Ecosystem Health Disturbance (Articles)

Victor I. Gornyy, Sergei G. Kritsuk, Iscander Sh. Latypov

Journal of Environmental Protection Vol.1 No.3，September 28, 2010

DOI: 10.4236/jep.2010.13029 5,481 Downloads 9,689 Views Citations
Low Complexity Discrete Bit-loading for OFDM Systems with Application in Power Line Communications (Articles)

Khalifa S. Al-Mawali, Amin Z. Sadik, Zahir M. Hussain

Int'l J. of Communications, Network and System Sciences Vol.4 No.6，June 17, 2011

DOI: 10.4236/ijcns.2011.46043 5,309 Downloads 9,568 Views Citations
Effect of Local and Global Scour on Lateral Response of Single Piles in Different Soil Conditions (Articles)

Yasser E. Mostafa

Engineering Vol.4 No.6，June 19, 2012

DOI: 10.4236/eng.2012.46039 7,996 Downloads 11,936 Views Citations
Lever-Loading System Analysis and Application (Articles)

Bingli Liu, Bo Zang, Hongbiao Quan

Modern Mechanical Engineering Vol.3 No.1，February 27, 2013

DOI: 10.4236/mme.2013.31008 5,648 Downloads 9,401 Views Citations
Efficacy and Safety of Dexmedetomidine during Anesthesia Induction of Patients with Intracranial Tumor: A Preliminary Observational Trial (Articles)

Jiangbei Cao, Wenzhu Shi, Weidong Mi, Hong Zhang

Pharmacology & Pharmacy Vol.4 No.8，November 8, 2013

DOI: 10.4236/pp.2013.48084 3,195 Downloads 5,818 Views Citations
A Uniaxial Loading Device for Studying Mechanoresponses of Single Plant Cell (Articles)

Liqing Zhu, Xue Fu, Jie Yan, Junyu Liu

Engineering Vol.5 No.10B，December 17, 2013

DOI: 10.4236/eng.2013.510B085 3,962 Downloads 5,148 Views Citations
On the Advantages of the Theories of Plasticity with Singular Loading Surface (Articles)

Andrew Rusinko, Daniel Fenyvesi

Journal of Materials Science and Chemical Engineering Vol.2 No.11，October 30, 2014

DOI: 10.4236/msce.2014.211003 4,503 Downloads 6,375 Views Citations
Comparison of Loading Functions in the Modelling of Automobile Aluminium Alloy Wheel under Static Radial Load (Articles)

Samuel Onoriode Igbudu, David Abimbola Fadare

Open Journal of Applied Sciences Vol.5 No.7，July 31, 2015

DOI: 10.4236/ojapps.2015.57040 3,511 Downloads 5,127 Views Citations
A Theoretical Analysis of Functionally Graded Beam under Thermal Loading (Articles)

Abla El-Megharbel

World Journal of Engineering and Technology Vol.4 No.3，August 12, 2016

DOI: 10.4236/wjet.2016.43044 2,592 Downloads 4,454 Views Citations
Development of an Artificial Finger-Like Knee Loading Device to Promote Bone Health (Articles)

Sandeep Korupolu, Stanley Chien, Hiroki Yokota, Sohel Anwar

Journal of Biomedical Science and Engineering Vol.10 No.11，November 30, 2017

DOI: 10.4236/jbise.2017.1011041 1,348 Downloads 2,367 Views Citations
A Critical Review of Machine Loading Problem in Flexible Manufacturing System (Articles)

Ranbir Singh, Rajender Singh, B. K. Khan

World Journal of Engineering and Technology Vol.3 No.4，November 30, 2015

DOI: 10.4236/wjet.2015.34028 5,000 Downloads 6,812 Views Citations

<123 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies