Design for Additive Manufacturing - Articles - Scientific Research Publishing

Quantitative Simulation Study of Metal Additive Manufacturing by Kinetic Monte Carlo (Articles)

Kepeng Ouyang, Youdi Kuang

Journal of Applied Mathematics and Physics Vol.10 No.5, May 18, 2022

DOI: 10.4236/jamp.2022.105110 330 Downloads 1,407 Views Citations
Effect of Acetone Vapor Smoothing Process on Surface Finish and Geometric Accuracy of Fused Deposition Modeling ABS Parts (Articles)

Viviane Pestano, Mariana Pohlmann, Fabio Pinto da Silva

Journal of Materials Science and Chemical Engineering Vol.10 No.10, October 24, 2022

DOI: 10.4236/msce.2022.1010001 334 Downloads 2,171 Views Citations
Characterization and Modeling of Mechanical Properties of Additively Manufactured Coconut Fiber-Reinforced Polypropylene Composites (Articles)

George Mosi, Bernard W. Ikua, Samuel K. Kabini, James W. Mwangi

Advances in Materials Physics and Chemistry Vol.14 No.6, June 21, 2024

DOI: 10.4236/ampc.2024.146008 230 Downloads 1,497 Views Citations
High Temperature Mechanical Properties of Additive Manufacturing CoCr F75 Alloy (Articles)

Daniel Moreno, Yohanan Nachmana, Matan Zakai, Omer Hollander, Ishai Alon, Elinor Itzhak, Moshe Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.13 No.2, February 28, 2025

DOI: 10.4236/jmmce.2025.132003 154 Downloads 1,149 Views Citations
Finite Element Modeling and Validation of Submerged Arc Welding for Repairing 136RE Heavy Rails (Articles)

Arman Ali Mohammadi, Zhiyong Wang, Hualiang Teng

Journal of Transportation Technologies Vol.16 No.1, December 22, 2025

DOI: 10.4236/jtts.2026.161005 41 Downloads 264 Views Citations
High-Temperature Stress-Strain Behavior and Fractographic Characterization of Additively Manufactured Inconel 939 (Articles)

Daniel Moreno, Matan Zakai, Yohanan Nahmana, Ariel Y. Cohen, Moshe Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.14 No.3, April 8, 2026

DOI: 10.4236/jmmce.2026.143006 50 Downloads 264 Views Citations
The Effect of Consumption on the Appearance of Closers Implemented by 3D Printer Technology (FDM) (Articles)

Sanaa Abdullah Alsiyami, Shadia Salah Salem

Journal of Textile Science and Technology Vol.8 No.4, September 16, 2022

DOI: 10.4236/jtst.2022.84014 299 Downloads 1,194 Views Citations
Recycled, Bio-Based, and Blended Composite Materials for 3D Printing Filament: Pros and Cons—A Review (Articles)

Khanh Q. Nguyen, Pascal Y. Vuillaume, Lei Hu, Jorge López-Beceiro, Patrice Cousin, Saïd Elkoun, Mathieu Robert

Materials Sciences and Applications Vol.14 No.3, March 10, 2023

DOI: 10.4236/msa.2023.143010 1,112 Downloads 7,310 Views Citations
Characterization of 3D Printed Poly(3-Hydroxybutyric-Co-3-Hydroxyvalerate) by Fused Granular Fabrication through Thermal and Mechanical Analyses (Articles)

Lok-Ching Wu, Cheng-Hao Lee, Yanming Wang, Yaohui Liu, Chi-Wai Kan

Journal of Materials Science and Chemical Engineering Vol.11 No.12, December 29, 2023

DOI: 10.4236/msce.2023.1112006 224 Downloads 814 Views Citations
The Construction of Pairwise Additive Minimal BIB Designs with Asymptotic Results (Articles)

Kazuki Matsubara, Sanpei Kageyama

Applied Mathematics Vol.5 No.14, July 28, 2014

DOI: 10.4236/am.2014.514207 2,768 Downloads 4,072 Views Citations
This article belongs to the Special Issue on Experimental Design
Effect of Melt Scan Rate on Microstructure and Macrostructure for Electron Beam Melting of Ti-6Al-4V (Articles)

Karina Puebla, Lawrence E. Murr, Sara M. Gaytan, Edwin Martinez, Francisco Medina, Ryan B. Wicker

Materials Sciences and Applications Vol.3 No.5, May 22, 2012

DOI: 10.4236/msa.2012.35038 8,210 Downloads 13,135 Views Citations
Characteristics of Biometallic Alloy to Additive Manufacturing Using Selective Laser Melting Technology (Articles)

Marcello Vertamatti Mergulhão, Maurício David Martins Das Neves

Journal of Biomaterials and Nanobiotechnology Vol.9 No.1, January 31, 2018

DOI: 10.4236/jbnb.2018.91008 1,829 Downloads 4,445 Views Citations
Surface Roughness Quality and Dimensional Accuracy—A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost-Effective FDM 3D Printer (Articles)

Mohammad S. Alsoufi, Abdulrhman E. Elsayed

Materials Sciences and Applications Vol.9 No.1, January 5, 2018

DOI: 10.4236/msa.2018.91002 5,246 Downloads 14,630 Views Citations
The Effects of Build Parameters and Strain Rate on the Mechanical Properties of FDM 3D-Printed Acrylonitrile Butadiene Styrene (Articles)

Kemar Hibbert, Grant Warner, Celeste Brown, Olusegun Ajide, Gbadebo Owolabi, Amin Azimi

Open Journal of Organic Polymer Materials Vol.9 No.1, January 31, 2019

DOI: 10.4236/ojopm.2019.91001 1,683 Downloads 4,661 Views Citations
Numerical Analysis and Modelling of a 100 N Hypergolic Liquid Bipropellant Thruster (Articles)

Grace Olileanya Ngwu, Benjamin Iyenagbe Ugheoke, Olatunbosun Tarfa Yusuf, Mopa Ashem Nyabam, Spencer Ojogba Onuh

Advances in Aerospace Science and Technology Vol.5 No.4, November 27, 2020

DOI: 10.4236/aast.2020.54006 964 Downloads 3,631 Views Citations
Mechanical Properties, Metallurgical Characteristics and Anisotropy of Additive Manufacturing of 316L (Articles)

D. Moreno, Y. Nahmana, O. Nafman, O. Kam, B. Wolfman, A. Y. Cohen, M. Shapira

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.2, March 31, 2022

DOI: 10.4236/jmmce.2022.102017 744 Downloads 2,275 Views Citations
Aspects of the Powder in Metal Additive Manufacturing: A Review (Articles)

Gladius Lewis

World Journal of Engineering and Technology Vol.10 No.2, May 25, 2022

DOI: 10.4236/wjet.2022.102022 973 Downloads 4,807 Views Citations
Application of Technology of Additive Manufacturing in Radiators and Heat Exchangers (Articles)

Chunhua Sun, Guangqing Shang

Journal of Power and Energy Engineering Vol.10 No.11, November 30, 2022

DOI: 10.4236/jpee.2022.1011003 389 Downloads 2,150 Views Citations
The Comparison of the Mechanical Characteristics of ABS Using Three Different Plastic Production Techniques (Articles)

Yousuf Pasha Shaik, Naresh Kumar Naidu, Venkat Reddy Yadavalli, Manish Reddy Muthyala

Open Access Library Journal Vol.10 No.5, May 24, 2023

DOI: 10.4236/oalib.1110097 469 Downloads 7,303 Views Citations
Optimization of Extrusion Process Parameters of Recycled High-Density Polyethylene-Thermoplastic Starch Composite for Fused Filament Fabrication (Articles)

Grace Njeri Wamuti, James Wamai Mwangi, Samuel Kabini Karanja, Leif Micke, Henning Zeidler

Open Journal of Composite Materials Vol.13 No.4, September 25, 2023

DOI: 10.4236/ojcm.2023.134006 338 Downloads 1,722 Views Citations

First <123 ...>Last

	customer@scirp.org
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies