Separator Design - Articles - Scientific Research Publishing

Application of High Tension Roll Separator for the Separation of Titanium Bearing Minerals: Process Modeling and Optimization (Articles)

Srijith Mohanan, Sunil Kumar Tripathy, Y. Ramamurthy, C. Raghu Kumar

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.10, October 31, 2012

DOI: 10.4236/jmmce.2012.1110103 7,887 Downloads 11,586 Views Citations
Development an Easy-to-Use Simulator to Thermodynamic Design of Gas Condensate Reservoir’s Separators (Articles)

Ahmadreza Ejraei Bakyani, Samira Heidari, Alireza Rasti, Azadeh Namdarpoor

Modeling and Numerical Simulation of Material Science Vol.8 No.1, January 31, 2018

DOI: 10.4236/mnsms.2018.81001 1,221 Downloads 3,698 Views Citations
Helical Dielectrophoretic Particle Separator Fabricated by Conformal Spindle Printing (Articles)

Nicolas Guérin, Martin Lévesque, Daniel Therriault

Journal of Biomedical Science and Engineering Vol.7 No.9, July 4, 2014

DOI: 10.4236/jbise.2014.79064 3,882 Downloads 5,551 Views Citations
This article belongs to the Special Issue on Microfluidics Application in Biomedical Engineering
Characterisation and Pre-concentration of Chromite Values from Plant Tailings Using Floatex Density Separator (Articles)

C. Raghu Kumar, Sunil Tripathy, D.S. Rao

Journal of Minerals and Materials Characterization and Engineering Vol.8 No.5, May 20, 2009

DOI: 10.4236/jmmce.2009.85033 7,465 Downloads 9,765 Views Citations
Recovery of Cassiterite and Topaz Minerals from an Old Metallurgical Dump, Eastern Desert of Egypt (Articles)

Suzan Sami Ibrahim, Khaled Ezzat Yassin, Tawfik Refaat Boulos, Ayman Aly Hagrass

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.1, January 29, 2022

DOI: 10.4236/jmmce.2022.101005 329 Downloads 1,817 Views Citations
Evaluation of Electrical Submersible Pump on Field Production Network Optimization in Niger Delta Oilfield (Articles)

Anthony Kerunwa, Julian Ubanozie Obibuike, Ndubuisi Uchechukwu Okereke, Stephen G. Udeagbara, Angela Nkechinyere Nwachukwu, Stanley Toochukwu Ekwueme

Open Journal of Yangtze Oil and Gas Vol.7 No.1, December 31, 2021

DOI: 10.4236/ojogas.2022.71003 520 Downloads 3,721 Views Citations
Methods for Reducing Seed Damage in the Technological Process of Cotton Processing (Articles)

Muradov Rustam, Isakhanov Khamidullo, Khosimov Khusanboy

Engineering Vol.14 No.3, March 25, 2022

DOI: 10.4236/eng.2022.143011 277 Downloads 1,130 Views Citations
Theoretical and Experimental Studies of the Effect of Inclined Scraper on Removal of Raw Cotton from Mesh Surface (Articles)

Muradov Rustam Muradovich, Karimov Abdusamat Ismonovich, Mardanov Botir Mardanovich

World Journal of Mechanics Vol.4 No.12, December 22, 2014

DOI: 10.4236/wjm.2014.412036 2,684 Downloads 3,677 Views Citations
Study of the Aerodynamic Process and Its Impact on Cotton Transportation Process through the Cotton Pipeline (Articles)

Shokhsanam Imomalieva, Anvar Makhkamov

Engineering Vol.13 No.12, December 24, 2021

DOI: 10.4236/eng.2021.1312048 353 Downloads 1,125 Views Citations
Study on Optimizing High-Gradient Magnetic Separation—Part 1: Improvement of Magnetic Particle Retention Based on CFD Simulations (Articles)

Yonas S. Shaikh, Christian Seibert, Percy Kampeis

World Journal of Condensed Matter Physics Vol.6 No.2, May 31, 2016

DOI: 10.4236/wjcmp.2016.62016 2,865 Downloads 5,060 Views Citations
Methods for Increasing the Efficiency of Cleaning the Transfer Device (Articles)

Salokhiddinova Makhliyo, Muradov Rustam

Engineering Vol.14 No.1, January 19, 2022

DOI: 10.4236/eng.2022.141005 317 Downloads 1,366 Views Citations
The Immersive Teaching and Smart Interactive Training Platform for Virtual Simulation System in Educational Reform Application (Articles)

Zhijian Huang, Xiankun Wu, Chenghui Jing

Open Access Library Journal Vol.13 No.3, March 17, 2026

DOI: 10.4236/oalib.1114958 25 Downloads 182 Views Citations
The Nature of Design through the Lenses of the Sociological Imagination (Articles)

Lubomir Popov

Advances in Applied Sociology Vol.11 No.11, November 29, 2021

DOI: 10.4236/aasoci.2021.1111048 440 Downloads 2,333 Views Citations
The Part Count Tool (PaCT) for Design Concept Selection (Articles)

Tarang Parashar, Kerry Poppa, Katie Grantham Lough, Robert B. Stone

Modern Mechanical Engineering Vol.1 No.2, November 30, 2011

DOI: 10.4236/mme.2011.12003 6,313 Downloads 12,308 Views Citations
A Combined Probabilistic and Optimization Approach for Improved Chemical Mixing Systems Design (Articles)

Matthew J. Opgenorth, William E. McDermott, Peter Laz, Corinne S. Lengsfeld

Engineering Vol.3 No.6, June 23, 2011

DOI: 10.4236/eng.2011.36077 5,801 Downloads 9,273 Views Citations
Design in Visual Communication (Articles)

Mustafa Günay

Art and Design Review Vol.9 No.2, April 8, 2021

DOI: 10.4236/adr.2021.92010 10,394 Downloads 24,714 Views Citations
Does Design Thinking Run Counter to Design? (Articles)

Shukai Wang

Art and Design Review Vol.10 No.1, January 14, 2022

DOI: 10.4236/adr.2022.101004 494 Downloads 2,315 Views Citations
An Interactive Evolutionary Environment for Creative Design (Articles)

Wissam M. Alobaidi, Eric Sandgren

Modern Mechanical Engineering Vol.11 No.2, May 31, 2021

DOI: 10.4236/mme.2021.112003 540 Downloads 2,419 Views Citations
Probabilistic Simulation Approach to Evaluate the Tooth-Root Strength of Spur Gears with FEM-Based Verification (Articles)

EL-Sayed S. Aziz, Constantin Chassapis

Engineering Vol.3 No.12, December 14, 2011

DOI: 10.4236/eng.2011.312142 9,759 Downloads 14,871 Views Citations
A Study on the Conceptual Design of Fashion Product (Articles)

Yue Hu, Ying Liu

Art and Design Review Vol.5 No.4, November 22, 2017

DOI: 10.4236/adr.2017.54020 2,212 Downloads 8,086 Views Citations

First <12 3 ...>Last

	customer@scirp.org
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies