Metal Casting - Articles - Scientific Research Publishing

Effect of Cooling Intensity and Position on Solidification in Semi-Continuous Casting of Copper (Articles)

Amar H. Hameed, Ahmed A. Mohammed, Obaid T. Fadhil

Open Journal of Fluid Dynamics Vol.6 No.3，September 13, 2016

DOI: 10.4236/ojfd.2016.63015 2,240 Downloads 4,931 Views Citations
Effect of Copper and Silicon Carbide Content on the Corrosion Resistance of Al-Mg Alloys in Acidic and Alkaline Solutions (Articles)

Ahmad T. Mayyas, Mohammad M. Hamasha, Abdalla Alrashdan, Adel M. Hassan, Mohammed T. Hayajneh

J. of Minerals and Materials Characterization and Eng. Vol.11 No.4，April 20, 2012

DOI: 10.4236/jmmce.2012.114025 5,783 Downloads 7,911 Views Citations
Equal Channel Angular Pressing of Al-SiC Composites Fabricated by Stir Casting (Articles)

Farouk Shehata, Nahed ElMahallawy, Mohamed Arab, Mohamed Agwa

Open Journal of Metal Vol.3 No.2A，July 16, 2013

DOI: 10.4236/ojmetal.2013.32A1004 5,497 Downloads 10,444 Views Citations
This article belongs to the Special Issue on
Characteristics of Toxic Waste from Nine Casting Industries According to Mexican Standards: Prospective Study of West Mexico (Articles)

Walter Ramírez-Meda, José de Jesús Bernal-Casillas, Luis Alberto López-Tejeda, Gilberto Íñiguez-Covarrubias

Journal of Geoscience and Environment Protection Vol.5 No.3，February 16, 2017

DOI: 10.4236/gep.2017.53004 3,407 Downloads 4,185 Views Citations
Tribological Behaviour of Aluminium/Alumina/Graphite Hybrid Metal Matrix Composite Using Taguchi’s Techniques (Articles)

N. Radhika, R. Subramanian, S. Venkat Prasat

J. of Minerals and Materials Characterization and Eng. Vol.10 No.5，April 20, 2011

DOI: 10.4236/jmmce.2011.105032 11,566 Downloads 19,430 Views Citations
Analysis of Molten Metal Distribution in the Mold of a Horizontal Centrifugal Casting (Articles)

Miguel A. Barron, Dulce Y. Medina, Joan Reyes

Open Journal of Applied Sciences Vol.10 No.7，July 17, 2020

DOI: 10.4236/ojapps.2020.107031 702 Downloads 2,291 Views Citations
Development and Characterization of Aluminium-Based Metal Matrix Composites (Articles)

M. A. Gafur, Al Fahad Ahmed, Raisul Abrar, Surya Sabrin Soshi

Materials Sciences and Applications Vol.14 No.1，January 29, 2023

DOI: 10.4236/msa.2023.141001 330 Downloads 1,730 Views Citations
Influence of Reinforcement Type on Microstructure, Hardness, and Tensile Properties of an Aluminum Alloy Metal Matrix Composite (Articles)

Belete Sirahbizu Yigezu, Manas Mohan Mahapatra, Pradeep Kumar Jha

J. of Minerals and Materials Characterization and Eng. Vol.1 No.4，July 4, 2013

DOI: 10.4236/jmmce.2013.14022 7,752 Downloads 12,407 Views Citations
Effect of the Density of Molten Metal on the Raining Phenomenon in Horizontal Centrifugal Casting (Articles)

Miguel A. Barron, Joan Reyes

Open Journal of Applied Sciences Vol.14 No.7，July 30, 2024

DOI: 10.4236/ojapps.2024.147125 80 Downloads 303 Views Citations
Study of Microstructure and Mechanical Behavior of Aluminum/Garnet/Carbon Hybrid Metal Matrix Composites (HMMCs) Fabricated by Chill Casting Method (Articles)

M. G. Anantha Prasad, Nityanand Bandekar

Journal of Materials Science and Chemical Engineering Vol.3 No.3，March 12, 2015

DOI: 10.4236/msce.2015.33001 4,143 Downloads 5,842 Views Citations
Finite Element Wear Behavior Modeling of Al/Al₂SiO₅/C Chilled Hybrid Metal Matrix Composites (CHMMCs) (Articles)

Joel Hemanth

Materials Sciences and Applications Vol.2 No.7，July 29, 2011

DOI: 10.4236/msa.2011.27118 6,864 Downloads 11,840 Views Citations
Heat Transfer Analysis during External Chilling of Composite Material Castings through Experimental and Finite Element (FE) Modelling (Articles)

Joel Hemanth

Modeling and Numerical Simulation of Material Science Vol.4 No.1，January 2, 2014

DOI: 10.4236/mnsms.2014.41001 5,317 Downloads 8,478 Views Citations
Microstructural and Mechanical Characterization of Chicken Eggshell-Reinforced Al6061 Matrix Composites (Articles)

Surendra Kumar Dwiwedi, Ashok Kumar Srivastava, Koh-ichi Sugimoto, Manoj Chopkar

Open Journal of Metal Vol.8 No.1，March 27, 2018

DOI: 10.4236/ojmetal.2018.81001 1,386 Downloads 3,142 Views Citations
Microstructures and Properties of Recycled Composites – Particle Reinforced Iron Matrix Functionally Graded Materials Fabricated by Centrifugal Casting (Articles)

Yanpei Song, Shuangxu Bi, Xiuqing Li

Engineering Vol.2 No.5，May 31, 2010

DOI: 10.4236/eng.2010.25047 5,484 Downloads 9,889 Views Citations
Effect of Processing Paramters on Metal Matrix Composites: Stir Casting Process (Articles)

G. G. Sozhamannan, S. Balasivanandha Prabu, V. S. K. Venkatagalapathy

J. of Surface Engineered Materials and Advanced Technology Vol.2 No.1，January 12, 2012

DOI: 10.4236/jsemat.2012.21002 18,830 Downloads 45,681 Views Citations
Melt Infiltration Casting Of Zr₅₇Al₁₀Nb₅Cu_15.4Ni_12.6 Amorphous Matrix Composite (Articles)

K.Q. Qiu, Y.L. Ren

J. of Minerals and Materials Characterization and Eng. Vol.3 No.2，October 20, 2004

DOI: 10.4236/jmmce.2004.32010 6,132 Downloads 7,608 Views Citations
Effect of Electroless Copper Coating on the Corrosion Behavior of Aluminium Based Metal Matrix Composites Reinforced with Silicon Carbide Particles (Articles)

Mohamed Zakaulla, A. R. Anwar Khan, P. G. Mukunda

J. of Minerals and Materials Characterization and Eng. Vol.2 No.1，January 10, 2014

DOI: 10.4236/jmmce.2014.21004 5,039 Downloads 7,362 Views Citations
Cardiorespiratory Effects of Derotational Casting during Anesthesia for Children with Early Onset Scoliosis (Articles)

Robin D. Jensen, Andrew F. Stasic, Shyam Kishan, Eric Scott, Deann M. Martin, Stephen F. Dierdorf

Open Journal of Anesthesiology Vol.4 No.2，January 29, 2014

DOI: 10.4236/ojanes.2014.42005 3,966 Downloads 5,912 Views Citations
Effects of Pressure on the Mechanical Properties and Microstructure of Die Cast Aluminum A380 Alloy (Articles)

Kenneth N. Obiekea, Shekarau Y. Aku, Danjuma S. Yawas

J. of Minerals and Materials Characterization and Eng. Vol.2 No.3，May 28, 2014

DOI: 10.4236/jmmce.2014.23029 5,694 Downloads 9,296 Views Citations
Ultrasonic Fatigue of Ti₄₀Zr₁₀Cu₃₄Pd₁₄Sn₂ Glassy Alloy (Articles)

Shin-ichi Yamaura, Shengli Zhu, Katsuhiro Abe, Guoqiang Xie

Open Journal of Metal Vol.4 No.3，August 27, 2014

DOI: 10.4236/ojmetal.2014.43007 4,089 Downloads 5,175 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies