Liquid Composite Molding; Wicking; Fiber Tow; Lucas-Washburn Model; Permeability; Sizing - Articles

Experimental Characterization by Fluorescence of Capillary Flows in the Fiber Tows of Engineering Fabrics (Articles)

François LeBel, Amir Ershad Fanaei, Édu Ruiz, François Trochu

Open Journal of Inorganic Non-metallic Materials Vol.2 No.3，July 19, 2012

DOI: 10.4236/ojinm.2012.23004 6,750 Downloads 14,080 Views Citations
Withdraw: Improvement on Adhesion Properties of Insert Injection Molding Composites: Effect of Inserted Parts, Adhesive Lengths and Injection Conditions (Articles)

Badin Pinpathomrat, Hiroyuki Hamada

Open Journal of Composite Materials Vol.7 No.4，July 27, 2017

DOI: 10.4236/ojcm.2017.74013 1,288 Downloads 2,729 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages
Production and Properties of Short Jute and Short E-Glass Fiber Reinforced Polypropylene-Based Composites (Articles)

Md Nuruzzaman Khan, Juganta K. Roy, Nousin Akter, Haydar U. Zaman, Tuhidul Islam, Ruhul A. Khan

Open Journal of Composite Materials Vol.2 No.2，April 26, 2012

DOI: 10.4236/ojcm.2012.22006 9,280 Downloads 19,613 Views Citations
Longitudinal Compressive Failure of Multiple-Fiber Model Composites for a Unidirectional Carbon Fiber Reinforced Plastic (Articles)

Tae Kun Jeong, Masahito Ueda

Open Journal of Composite Materials Vol.6 No.1，January 8, 2016

DOI: 10.4236/ojcm.2016.61002 5,191 Downloads 7,729 Views Citations
Simulation and Injection Molding of Ring-Shaped Polymer Bonded Nickel Braze Metal Composite Preforms Based on Rheological and Thermal Analyses (Articles)

Stefan Kirchberg

Open Journal of Composite Materials Vol.3 No.2，April 15, 2013

DOI: 10.4236/ojcm.2013.32004 5,784 Downloads 9,461 Views Citations
Effect of Thermal Shrinkage of Extruded Sheet on Mouthguard Thickness: Influence of Model Undercut (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.13 No.1，January 29, 2022

DOI: 10.4236/msa.2022.131004 196 Downloads 794 Views Citations
Qualitative and Quantitative Perfusion Parameters Determined by 3D Single-Shot GRASE ASL MR Imaging (Articles)

Claus Kiefer, Frauke Kellner-Weldon, Marwan El-Koussy, Martinus Hauf, Gerhard Schroth

Open Journal of Medical Imaging Vol.2 No.1，March 28, 2012

DOI: 10.4236/ojmi.2012.21001 4,250 Downloads 7,823 Views Citations
Using Capillary Pressure Derived Parameters for Improving Permeability Prediction (Articles)

Amir Maher S. Lala

International Journal of Geosciences Vol.4 No.9，November 29, 2013

DOI: 10.4236/ijg.2013.49126 7,532 Downloads 10,977 Views Citations
An Experimental Investigation to Examine the Wicking Properties of Silk Fabrics (Articles)

Md Kamrul Hasan, Juramirza Kayumov, Guocheng Zhu, Munna Khatun, Asaduzzaman Nur, Xinbo Ding

Journal of Textile Science and Technology Vol.5 No.4，November 6, 2019

DOI: 10.4236/jtst.2019.54010 916 Downloads 3,277 Views Citations
A Fiber Pull-Out Based Model for Synthetic Fiber Reinforced Concrete Beams under a Flexural Load (Articles)

Alessandro Paglia

Open Journal of Civil Engineering Vol.3 No.3，August 29, 2013

DOI: 10.4236/ojce.2013.33025 5,921 Downloads 9,620 Views Citations
Effects of the Fiber Diameter on Mechanic Properties in Polymethyl-Methacrylate Composites Reinforced with Goose Feather Fiber (Articles)

Kenan Büyükkaya

Materials Sciences and Applications Vol.8 No.11，October 27, 2017

DOI: 10.4236/msa.2017.811059 1,163 Downloads 2,790 Views Citations
Comparative Study on Tribological Behavior of Graphene/Polyimide and Carbon Fibers/Polyimide Composites: A Review (Articles)

Niyobuhungiro Daniel, Hong Liu

World Journal of Engineering and Technology Vol.9 No.1，December 16, 2020

DOI: 10.4236/wjet.2021.91003 764 Downloads 1,696 Views Citations
Ionic Liquid as Useful Media for Dissolution, Derivatization, and Nanomaterial Processing of Chitin (Articles)

Jun-Ichi Kadokawa

Green and Sustainable Chemistry Vol.3 No.2A，May 27, 2013

DOI: 10.4236/gsc.2013.32A003 6,769 Downloads 11,571 Views Citations
This article belongs to the Special Issue on Ionic Liquids —— More Than Green Solvents
Fabrication and Characterization on Physico-Mechanical and Structural Properties of Sawdust Reinforced Acrylonitrile Butadiene Styrene (ABS) Composites (Articles)

Budrun Neher, Nabila Tasnim Nova, Rakib Hossain, M. A. Gafur, Farid Ahmed

Materials Sciences and Applications Vol.11 No.9，September 22, 2020

DOI: 10.4236/msa.2020.119043 976 Downloads 2,212 Views Citations
Determination of the Optimal Speed of Pultrusion for Large-Sized Composite Rods (Articles)

Aleksandr Krasnovskii, Iliya Kazakov

Journal of Encapsulation and Adsorption Sciences Vol.2 No.3，September 28, 2012

DOI: 10.4236/jeas.2012.23004 4,633 Downloads 7,544 Views Citations
Progress in Recycling of Composites with Polycyanurate Matrix (Articles)

Christian Dreyer, Dominik Söthje, Monika Bauer

Advances in Chemical Engineering and Science Vol.4 No.2，April 14, 2014

DOI: 10.4236/aces.2014.42020 5,101 Downloads 7,187 Views Citations
Preparation of Composite Particles by Forming Pickering Emulsion Followed by Drying-In-Liquid and Effect of Stepwise Addition of Solid Powder on Structure of Composite Particles (Articles)

Yasushi Akutsu, Yoshinari Taguchi, Masato Tanaka

Materials Sciences and Applications Vol.4 No.12，December 6, 2013

DOI: 10.4236/msa.2013.412100 4,623 Downloads 6,558 Views Citations
Effect of Natural Fiber Reinforced Polypropylene Composite Using Resin Impregnation (Articles)

Gibeop Nam, Nanqi Wu, Kazuya Okubo, Toru Fujii

Agricultural Sciences Vol.5 No.13，November 26, 2014

DOI: 10.4236/as.2014.513143 4,689 Downloads 6,401 Views Citations
This article belongs to the Special Issue on Natural Fibers
Predicting the Permeability of Fractured Porous Rock (Articles)

Wenjing Lu, Haojiao Liu

Engineering Vol.10 No.2，February 28, 2018

DOI: 10.4236/eng.2018.102004 1,052 Downloads 2,219 Views Citations
Effects of Ultrasonic Waves during Resin Impregnation on the Mechanical Properties of Unidirectional Composite Materials (Articles)

Yasunari Kuratani, Aya Miki, Norimichi Nanami, Hayato Nakatani, Hiroyuki Hamada

Open Journal of Composite Materials Vol.8 No.1，December 18, 2017

DOI: 10.4236/ojcm.2018.81001 1,192 Downloads 2,376 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies