Fabrication - Articles - Scientific Research Publishing

The Fabrication of Composite Material Based on Natural Macromolecules: A Review (Articles)

Rony Mia, Imon Biswas Shuva, Md. Abdullah Al Mamun, Md. Abu Bakar, Md. Faridul Islam Rumman, Md. Moshiur Rahman

Open Access Library Journal Vol.7 No.12，December 9, 2020

DOI: 10.4236/oalib.1106977 387 Downloads 1,845 Views Citations
Experimental Evaluation of the Mechanical Properties of Recycled Low Density Polyethylene/Bean Pod Ash Particulate Bio-Composites (Articles)

M. C. Ekwedigwe, E. E. Nnuka, C. U. Atuanya

J. of Minerals and Materials Characterization and Eng. Vol.3 No.5，August 24, 2015

DOI: 10.4236/jmmce.2015.35039 5,031 Downloads 6,086 Views Citations
Fabrication and Investigation of the Magnetic Properties of Co and Co3O4 Nanoparticles (Articles)

Fardin Taghizadeh

Optics and Photonics Journal Vol.6 No.8B，August 25, 2016

DOI: 10.4236/opj.2016.68B011 1,940 Downloads 4,491 Views Citations
Design and Fabrication of a Manually Operated Hydraulic Press (Articles)

Fisayo Adesina, Tiamiyu Ishola Mohammed, Oluwole Timothy Ojo

Open Access Library Journal Vol.5 No.4，April 26, 2018

DOI: 10.4236/oalib.1104522 7,424 Downloads 27,026 Views Citations
Design and Construction of a Telescopic Platform (Articles)

Akinnuli Basil Olufemi, Olabaniji Taye Sola, Yakubu Anakobe Jimoh

Open Access Library Journal Vol.5 No.9，September 29, 2018

DOI: 10.4236/oalib.1104784 700 Downloads 2,606 Views Citations
Development and Evaluation of Recycled Polypropylene and Bean Pod Powder Composite Biomaterial for Fused Filament Fabrication (Articles)

Felix Sotohou, James W. Mwangi, James M. Mutua, Erick K. Ronoh

Advances in Materials Physics and Chemistry Vol.13 No.3，March 31, 2023

DOI: 10.4236/ampc.2023.133003 248 Downloads 1,004 Views Citations
Characteristics of Yarn and Fabric Made out of Nanofibers (Articles)

S. A. Hosseini Ravandi, R. Bayat Tork, F. Dabirian, A. A. Gharehaghaji, A. Sajjadi

Materials Sciences and Applications Vol.6 No.1，January 21, 2015

DOI: 10.4236/msa.2015.61013 3,749 Downloads 5,791 Views Citations
Identification of Optimum Composition and Mechanical Properties of Al-Ni Metal Matrix Composite (Articles)

Manoj Kumar Pal, Simranjeet Singh Sandhu, Rohan Kalia, Arka Ghosh

J. of Minerals and Materials Characterization and Eng. Vol.3 No.4，July 8, 2015

DOI: 10.4236/jmmce.2015.34035 3,784 Downloads 5,570 Views Citations
Studies on Production Planning of Dispersion Type U₃Si₂-Al Fuel in Plate-Type Fuel Elements for Nuclear Research Reactors (Articles)

Miguel Luiz Miotto Negro, Michelangelo Durazzo, Marco Aurélio de Mesquita, Elita Fontenele Urano de Carvalho, Delvonei Alves de Andrade

World Journal of Nuclear Science and Technology Vol.6 No.4，September 28, 2016

DOI: 10.4236/wjnst.2016.64023 2,296 Downloads 3,570 Views Citations
Laser-Based Fabrication of Nanofoam inside a Hollow Capillary (Articles)

Alexander F. Courtier, James A. Grant-Jacob, Rand Ismaeel, Daniel J. Heath, Gilberto Brambilla, William J. Stewart, Robert W. Eason, Ben Mills

Materials Sciences and Applications Vol.8 No.12，November 3, 2017

DOI: 10.4236/msa.2017.812060 936 Downloads 1,760 Views Citations
This article belongs to the Special Issue on Laser Processing of Materials
Design and Fabrication of Aluminum Cladding and Curtain Wall of a Sports Club (Articles)

Muhammad Tayyab Naqash

Open Journal of Civil Engineering Vol.9 No.1，February 21, 2019

DOI: 10.4236/ojce.2019.91001 4,655 Downloads 14,743 Views Citations
Laser Polishing of Laser Powder Bed Fusion AlSi10Mg Parts—Influence of Initial Surface Roughness on Achievable Surface Quality (Articles)

Markus Hofele, Andre Roth, Jochen Schanz, David K. Harrison, Anjali K. M. De Silva, Harald Riegel

Materials Sciences and Applications Vol.12 No.1，January 20, 2021

DOI: 10.4236/msa.2021.121002 738 Downloads 2,587 Views Citations
This article belongs to the Special Issue on Material Surface Engineering
Trace Metal Leaching from Cookware Locally Fabricated from Scrap Metal: A Case Study of Ntungamo District, Uganda (Articles)

Samuel Habimaana, Hannington Gumisiriza, Grace Birungi

American Journal of Analytical Chemistry Vol.13 No.9，September 27, 2022

DOI: 10.4236/ajac.2022.139022 215 Downloads 1,364 Views Citations
Electrospun Gelatin Constructs with Tunable Fiber Orientation Promote Directed Angiogenesis (Articles)

Ramon B. Montero, Roberto I. Vazquez-Padron, Si M. Pham, Gianluca D’Ippolito, Fotios M. Andreopoulos

Open Journal of Regenerative Medicine Vol.3 No.1，March 3, 2014

DOI: 10.4236/ojrm.2014.31001 5,072 Downloads 7,215 Views Citations
Studies on Capacity Expansion of Fuel Plants for Nuclear Research Reactors (Articles)

Miguel Luiz Miotto Negro, Michelangelo Durazzo, Marco Aurélio de Mesquita, Elita Fontenele Urano de Carvalho, Roberto Navarro de Mesquita, Delvonei Alves de Andrade

World Journal of Nuclear Science and Technology Vol.8 No.2，April 9, 2018

DOI: 10.4236/wjnst.2018.82005 1,153 Downloads 2,153 Views Citations
Simulation and Experimental Analysis of Vortex Tube Using Steel Material (Articles)

Muhammad Bilal, Yaolong Chen, Jun Zha, Naveed Ullah

Open Journal of Fluid Dynamics Vol.10 No.3，July 1, 2020

DOI: 10.4236/ojfd.2020.103010 830 Downloads 3,462 Views Citations
Recipe Development and Mechanical Characterization of Carbon Fibre Reinforced Recycled Polypropylene 3D Printing Filament (Articles)

Mwambe Polline, James M. Mutua, Thomas Ochuku Mbuya, Kyekyere Ernest

Open Journal of Composite Materials Vol.11 No.3，July 30, 2021

DOI: 10.4236/ojcm.2021.113005 577 Downloads 2,203 Views Citations
Optimization of Extrusion Process Parameters of Recycled High-Density Polyethylene-Thermoplastic Starch Composite for Fused Filament Fabrication (Articles)

Grace Njeri Wamuti, James Wamai Mwangi, Samuel Kabini Karanja, Leif Micke, Henning Zeidler

Open Journal of Composite Materials Vol.13 No.4，September 25, 2023

DOI: 10.4236/ojcm.2023.134006 199 Downloads 976 Views Citations
From Waste to Wealth: Unlocking the Potential of Bangladesh’s Okra Fiber for Economic Prosperity (Articles)

Bashir Ahmed, Md. Ahshan Habib, Md. Shamsul Alam, Kamrul Hasan Bhuiyan, Md. Golam Rabbani, Md. Tajbir Husain

Journal of Textile Science and Technology Vol.11 No.1，February 24, 2025

DOI: 10.4236/jtst.2025.111003 46 Downloads 465 Views Citations
Cost-Benefit Analysis of Computer-Aided Technology Customization Projects (Articles)

Samar K. Saha

Open Journal of Business and Management Vol.5 No.2，April 14, 2017

DOI: 10.4236/ojbm.2017.52024 1,819 Downloads 3,205 Views Citations

<12 >

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies