FDM - Articles - Scientific Research Publishing

Additive Manufacturing of SiC Ceramics with Complicated Shapes Using the FDM Type 3D-Printer (Articles)

Hisaya Masuda, Yoshio Ohta, Mikito Kitayama

Journal of Materials Science and Chemical Engineering Vol.7 No.2，February 26, 2019

DOI: 10.4236/msce.2019.72001 2,543 Downloads 4,657 Views Citations
Numerical Study Using Statistical and Quantum Approaches for Solving Energy and Navier Stokes Momentum Equations (PDEs) (Articles)

Saeed J. Almalowi

Engineering Vol.14 No.3，March 28, 2022

DOI: 10.4236/eng.2022.143015 271 Downloads 941 Views Citations
Influence of Bed Temperature on Heat Shrinkage Shape Error in FDM Additive Manufacturing of the ABS-Engineering Plastic (Articles)

Young-Hyu Choi, Cheol-Min Kim, Hwan-Seock Jeong, Jeong-Ho Youn

World Journal of Engineering and Technology Vol.4 No.3D，October 20, 2016

DOI: 10.4236/wjet.2016.43D022 2,882 Downloads 7,058 Views Citations
A Scientific Review on Various Pellet Extruders Used in 3D Printing FDM Processes (Articles)

Yousuf Pasha Shaik, Jens Schuster, Aarif Shaik

Open Access Library Journal Vol.8 No.8，July 29, 2021

DOI: 10.4236/oalib.1107698 1,307 Downloads 11,784 Views Citations
Effect of Acetone Vapor Smoothing Process on Surface Finish and Geometric Accuracy of Fused Deposition Modeling ABS Parts (Articles)

Viviane Pestano, Mariana Pohlmann, Fabio Pinto da Silva

Journal of Materials Science and Chemical Engineering Vol.10 No.10，October 24, 2022

DOI: 10.4236/msce.2022.1010001 207 Downloads 1,182 Views Citations
FDM 3D-Print on Thermoplastic Polyurethane (TPU) with Different Process Parameters Using Gyroid and Zigzag Infill Patterns (Articles)

Venkat Reddy Yadavalli, Amar Kumar Myadam, Sriranga Babu Telu

Open Access Library Journal Vol.11 No.2，February 27, 2024

DOI: 10.4236/oalib.1111203 124 Downloads 829 Views Citations
Optimization of Fused Deposition Modelling (FDM) Process Parameters Using Bacterial Foraging Technique (Articles)

Samir Kumar PANDA, Saumyakant PADHEE, Anoop Kumar SOOD, S. S. MAHAPATRA

Intelligent Information Management Vol.1 No.2，November 30, 2009

DOI: 10.4236/iim.2009.12014 11,197 Downloads 21,922 Views Citations
Surface Roughness Quality and Dimensional Accuracy—A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost-Effective FDM 3D Printer (Articles)

Mohammad S. Alsoufi, Abdulrhman E. Elsayed

Materials Sciences and Applications Vol.9 No.1，January 5, 2018

DOI: 10.4236/msa.2018.91002 4,829 Downloads 13,281 Views Citations
Exploring the Potential to Uniquely Manufacture Curved VARTM Epoxy Composites Using Cost-Effective FDM Molds (Articles)

Syed Monis Raza Kazmi, Jens Schuster, Johannes Lutz

Open Journal of Composite Materials Vol.10 No.3，June 19, 2020

DOI: 10.4236/ojcm.2020.103004 741 Downloads 1,817 Views Citations
Higher Order Implicit Scheme for Nonlinear Time-Dependent Convection-Diffusion- Reaction Equation (Articles)

Uzair Ahmed, Daoud Suleiman Mashat, Dalal Adnan Maturi

American Journal of Computational Mathematics Vol.12 No.2，June 10, 2022

DOI: 10.4236/ajcm.2022.122014 201 Downloads 922 Views Citations
The Effect of Consumption on the Appearance of Closers Implemented by 3D Printer Technology (FDM) (Articles)

Sanaa Abdullah Alsiyami, Shadia Salah Salem

Journal of Textile Science and Technology Vol.8 No.4，September 16, 2022

DOI: 10.4236/jtst.2022.84014 214 Downloads 883 Views Citations
Recycled, Bio-Based, and Blended Composite Materials for 3D Printing Filament: Pros and Cons—A Review (Articles)

Khanh Q. Nguyen, Pascal Y. Vuillaume, Lei Hu, Jorge López-Beceiro, Patrice Cousin, Saïd Elkoun, Mathieu Robert

Materials Sciences and Applications Vol.14 No.3，March 10, 2023

DOI: 10.4236/msa.2023.143010 787 Downloads 5,399 Views Citations
Experimental Research on the Fabrication of Modular Devices for Drilling Using PLA for Model Parts (Articles)

Diana Băilă, Remigiusz Łabudzki, Igor Fodchuk, Mirian Bonilla

Open Journal of Applied Sciences Vol.14 No.10，October 17, 2024

DOI: 10.4236/ojapps.2024.1410182 50 Downloads 217 Views Citations
Numerical Solution of MHD Flow of Micropolar Fluid with Heat and Mass Transfer towards a Stagnation Point on a Vertical Plate (Articles)

N. T. El-Dabe, A. Y. Ghaly, R. R. Rizkallah, K. M. Ewis, A. S. Al-Bareda

American Journal of Computational Mathematics Vol.5 No.2，June 18, 2015

DOI: 10.4236/ajcm.2015.52013 3,173 Downloads 4,725 Views Citations
Study of Longitudinal Oscillations of a Building on the Basis of Continuum Plate Model (Articles)

Makhamatali K. Usarov, Gayratjon T. Ayubov

Journal of Applied Mathematics and Physics Vol.6 No.9，September 30, 2018

DOI: 10.4236/jamp.2018.69164 624 Downloads 1,236 Views Citations
3D Printing Role in Filling the Critical Gap in the Medical Supply Chain during COVID-19 Pandemic (Articles)

Mohsen Attaran

American Journal of Industrial and Business Management Vol.10 No.5，May 26, 2020

DOI: 10.4236/ajibm.2020.105066 5,625 Downloads 8,714 Views Citations
The G&G Model: A PDE Approach with Entropy and Irreversibility in Leadership and Policy Rehabilitation in the Democratic Republic of the Congo (Articles)

Glody Singa, Gilles-René Tamba Bokolo

Journal of Applied Mathematics and Physics Vol.13 No.5，May 28, 2025

DOI: 10.4236/jamp.2025.135107 23 Downloads 138 Views Citations

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies