Bending Test - Articles - Scientific Research Publishing

Bending Analysis of a Filament-Wound Composite Tube (Articles)

Gyula Szabó, Károly Váradi, Dávid Felhős

Modern Mechanical Engineering Vol.8 No.1，February 28, 2018

DOI: 10.4236/mme.2018.81005 1,821 Downloads 4,458 Views Citations
Structural Glass Fiber Reinforced Concrete for Slabs on Ground (Articles)

Philipp Löber, Klaus Holschemacher

World Journal of Engineering and Technology Vol.2 No.3B，September 18, 2014

DOI: 10.4236/wjet.2014.23B008 8,342 Downloads 12,176 Views Citations
A Study on the Flexural Performance of UHPC Precast Deck-Joint Interface by the Exposure of Steel Fiber (Articles)

Kilje Jung, Sung Yong Park, Sung Tae Kim, Byung-Suk Kim, Keunhee Cho

Engineering Vol.6 No.13，December 26, 2014

DOI: 10.4236/eng.2014.613090 4,191 Downloads 5,203 Views Citations
Evaluation of Contact Pressure in Bending under Tension Test by a Pressure Sensitive Film (Articles)

Luis Fernando Folle, Lirio Schaeffer

J. of Surface Engineered Materials and Advanced Technology Vol.6 No.4，October 28, 2016

DOI: 10.4236/jsemat.2016.64018 1,800 Downloads 3,007 Views Citations
Stress Distribution in Maxillary Central Incisors without Ferrules: A Finite Element Analysis of Post and Core Systems (Articles)

Akihiro Tagahara, Chihiro Masaki, Tomotaka Nodai, Takashi Munemasa, Taro Mukaibo, Yusuke Kondo, Ryuji Hosokawa

Open Journal of Stomatology Vol.11 No.7，July 14, 2021

DOI: 10.4236/ojst.2021.117022 267 Downloads 1,590 Views Citations
The division and bending of green and red semiconductor laser light at the same time (Articles)

Remzi Yıldırım

Natural Science Vol.3 No.10，October 21, 2011

DOI: 10.4236/ns.2011.310114 4,509 Downloads 8,430 Views Citations
3-Point Bending of Bars and Rods Made of Materials Obeying a Ramberg-Osgood Criterion (Articles)

José Luis Lanzagorta, Antonio Martín-Meizoso

World Journal of Mechanics Vol.1 No.3，July 6, 2011

DOI: 10.4236/wjm.2011.13010 9,007 Downloads 15,951 Views Citations
Belt-Parallel Shortening in the Northern Apennines and Seismotectonic Implications (Articles)

Marcello Viti, Enzo Mantovani, Daniele Babbucci, Caterina Tamburelli, Nicola Cenni, Massimo Baglione, Vittorio D’Intinosante

International Journal of Geosciences Vol.6 No.8，August 31, 2015

DOI: 10.4236/ijg.2015.68075 3,891 Downloads 5,056 Views Citations
Numerical Investigation of Flexural Bending in Biaxial Braided Structures for Flexor Tendon Repair (Articles)

Jerry Ochola, Benny Malengier, Lieva Van Langenhove

Journal of Biomedical Science and Engineering Vol.13 No.6，June 11, 2020

DOI: 10.4236/jbise.2020.136009 439 Downloads 1,409 Views Citations
New Methods Testing of Adhesion of the Coating to Sheet Metal by Bending (Articles)

Milan Dvořák, Emil Schwarzer

J. of Surface Engineered Materials and Advanced Technology Vol.2 No.2，April 5, 2012

DOI: 10.4236/jsemat.2012.22011 7,230 Downloads 12,200 Views Citations
Effect of Stacking Fault Energy on the Mechanism of Texture Formation during Alternating Bending of FCC Metals and Alloys (Articles)

Natalia Shkatulyak

International Journal of Nonferrous Metallurgy Vol.2 No.2，April 18, 2013

DOI: 10.4236/ijnm.2013.22005 6,631 Downloads 10,848 Views Citations
Peridynamic Solutions for Timoshenko Beams (Articles)

E. Thomas Moyer, Michael J. Miraglia

Engineering Vol.6 No.6，May 26, 2014

DOI: 10.4236/eng.2014.66034 6,943 Downloads 9,230 Views Citations
Springback of I-Section Beam after Pure Bending with von Mises Criteria (Articles)

Reham Saleh, Gamal Ali, Abla El-Megharbel

World Journal of Engineering and Technology Vol.6 No.1，February 2, 2018

DOI: 10.4236/wjet.2018.61006 910 Downloads 1,909 Views Citations
Assessment of Existing Bridge’s Beam Bending Stiffness Using Crack Characteristics (Articles)

Donglian Tan

Engineering Vol.12 No.2，February 10, 2020

DOI: 10.4236/eng.2020.122008 691 Downloads 2,035 Views Citations
Structural Inversion and Behavioural Changes as a Function of Composition in Sr-La-Al-B-Si Based Glasses (Articles)

Prasanta Kumar Ojha, Sangram K. Rath, Tapas K. Chongdar, Nitin M. Gokhale, Ajit R. Kulkarni

New Journal of Glass and Ceramics Vol.1 No.2，July 21, 2011

DOI: 10.4236/njgc.2011.12004 5,970 Downloads 11,679 Views Citations
Tunable Bending Stiffness, Buckling Force, and Natural Frequency of Nanowires and Nanoplates (Articles)

Hanxing Zhu, Z. B. Wang, T. X. Fan, D. Zhang

World Journal of Nano Science and Engineering Vol.2 No.3，September 28, 2012

DOI: 10.4236/wjnse.2012.23021 5,125 Downloads 8,377 Views Citations
Evaluation of the Bending Loss of the Hollow Optical Fiber for Application of the Carbon Dioxide Laser to Endoscopic Therapy (Articles)

Daisuke Kusakari, Hisanao Hazama, Rinna Kawaguchi, Katsunori Ishii, Kunio Awazu

Optics and Photonics Journal Vol.3 No.4A，August 9, 2013

DOI: 10.4236/opj.2013.34A003 5,660 Downloads 7,938 Views Citations
This article belongs to the Special Issue on Infrared Technology and Applications
Numerical Investigation of the Effect of Process and Sheet Parameters on Bending Angle in the Laser Bending Process (Articles)

Mehdi Safari

World Journal of Mechanics Vol.4 No.4，April 9, 2014

DOI: 10.4236/wjm.2014.44011 5,137 Downloads 6,929 Views Citations
Bending Stiffness of Truss-Reinforced Steel-Concrete Composite Beams (Articles)

Francesco Trentadue, Erika Mastromarino, Giuseppe Quaranta, Floriana Petrone, Giorgio Monti, Giuseppe Carlo Marano

Open Journal of Civil Engineering Vol.4 No.3，September 29, 2014

DOI: 10.4236/ojce.2014.43024 6,508 Downloads 9,087 Views Citations
Sheet Bending Deformation in Production of Thin-Walled Pipes (Articles)

Tatjana V. Brovman

World Journal of Mechanics Vol.4 No.12，December 22, 2014

DOI: 10.4236/wjm.2014.412035 2,842 Downloads 3,577 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies