Simulation and Implementation of Solar Powered Electric Vehicle

A. Bharathi Sankar, R. Seyezhai

Department of EEE, SSN College of Engineering, Chennai, India.

DOI: 10.4236/cs.2016.76055                

Abstract

The rise in the price of oil and pollution issues has increased the interest on the development of electric vehicles. This paper discusses about the application of solar energy to power up the vehicle. The basic principle of solar based electric vehicle is to use energy that is stored in a battery to drive the motor and it moves the vehicle in forward or reverse direction. The Photo Voltaic (PV) module may be connected either in parallel or series, and the charge controllers direct this solar power to the batteries. The DC voltage from the PV panel is then boosted up using a boost DC-DC converter, and then an inverter, where DC power is converted to AC power, ultimately runs the Brushless DC motor which is used as the drive motor for the vehicle application. This paper focuses on the design, simulation and implementation of the various components, namely: solar panel, charge controller, battery, DC-DC boost converter, DC-AC power converter (inverter circuit) and BLDC motor for the vehicle application. All these components are modeled in MATLAB/SIMULINK and in real-time, the hardware integration of the system is developed and tested to verify the simulation results.

Keywords

Photo Voltaic Panel, DC-DC Converter, Brushless DC Motor, Electric Vehicle

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	Spina, M.A., de la Vega, R.J., Rossi, S.R., et al. (2012) Source Issues on the Design of a Solar Vehicle Based on Hybrid Energy System. International Journal of Energy Engineering, 2, 15-21. http://dx.doi.org/10.5923/j.ijee.20120201.03
[2]	Lalouni, S., Rekioua, D., Rekioua, T. and Matagne, E. (2009) Fuzzy Logic Control of Standalone Photovoltaic System with Battery Storage. Journal of Power System, 193, 899-907.
[3]	Mangu, R., Prayaga, K., Nadimpally, B. and Nicaise, S. (2010) Design, Development and Optimization of Highly Efficient Solar Cars: Gato Del Sol I-IV. Proceedings of 2010 IEEE Green Technologies Conference, Grapevine, 15-16 April 2010, 1-6.
[4]	Husain, I. (2005) Electrical and Hybrid Vehicles Design Fundamentals. CRC Press, Boca Raton, London, New York and Washington DC.
[5]	Miller, T.J.E. (1989) Brushless Permanent Magnet and Reluctance Motor Drive. Clarendon Press, Oxford.
[6]	Trembly, O., Dessaint, L.A. and Dekkiche, A.-I. (2007) A Generic Battery Model for the Dynamic Simulation of Hybrid Electric Vehicles. 2007 IEEE Vehicle Power and Propulsion Conference, Arlington, 9-12 September 2007, 284- 289. http://dx.doi.org/10.1109/vppc.2007.4544139
[7]	Bellur, D.M. and Kazimierczuk, M.K. (2007) DC-DC Converters for Electric Vehicle Applications. 2007 Electrical Insulation Conference and Electrical Manufacturing Expo, Nashville, 22-24 October 2007, 286-293. http://dx.doi.org/10.1109/eeic.2007.4562633
[8]	Shmilovitz, D. (2005) On the Control of Photovoltaic Maximum Power Point Tracking via Output Parameters. IEE Proceedings—Electric Power Applications, 152, 239-248. http://dx.doi.org/10.1049/ip-epa:20040978
[9]	Chiang, S.J., Chang, K.T. and Yen, C.Y. (1998) Residential Photovoltaic Energy Storage System. IEEE Transactions on Industrial Electronics, 45, 385-394. http://dx.doi.org/10.1109/41.678996
[10]	Underland, N.M.T.M. and Robinson, W.P. (2002) Power Electronics Converters Application and Design. 3rd Edition, John Wiley & Sons, Inc., Hoboken.
[11]	Shimizu, T. and Hirakata, M. (2001) Generation Control Circuit for Photovoltaic Modules. IEEE Transactions on Power Electronics, 16, 293-300. http://dx.doi.org/10.1109/63.923760
[12]	Beno, J., Thompson, R. and Hebner, R. (2002) Flywheel Batteries for Vehicles. Proceedings of the 2002 Workshop on Autonomous Underwater Vehicles, Piscataway, 99-101. http://dx.doi.org/10.1109/AUV.2002.1177211
[13]	Zhu, Z.Q. and Howe, D. (2007) Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell Vehicles. Proceedings of the IEEE, 95, 746-765. http://dx.doi.org/10.1109/JPROC.2006.892482
[14]	Karden, E., Ploumen, S., Fricke, B., Miller, T. and Snyder, K. (2007) Energy Storage Devices for Future Hybrid Electric Vehicles. Journal of Power Sources, 168, 2-11. http://dx.doi.org/10.1016/j.jpowsour.2006.10.090
[15]	Giannouli, M. and Yianoulis, P. (2012) Study on the Incorporation of Photovoltaic Systems as an Auxiliary Power Source for Hybrid and Electric Vehicles. Solar Energy, 86, 441-451. http://dx.doi.org/10.1016/j.solener.2011.10.019
[16]	Zhang, X., Chau, K.T., Yu, C. and Chan, C.C. (2008) An Optimal Solar-Thermoelectric Hybrid Energy System for Hybrid Electric Vehicles. Proceedings of IEEE Vehicle Power and Propulsion Conference, Harbin, 3-5 September 2008, 1-6.
[17]	Zhang, X., Chau, K.T. and Chan, C.C. (2010) Overview of Power Networks in Hybrid Electric Vehicles. Journal of Asian Electric Vehicles, 8, 1371-1377. http://dx.doi.org/10.4130/jaev.8.1371
[18]	Arsie, I., Rizzo, G. and Sorrentino, M. (2010) Effect of Engine Thermal Transients on the Energy Management of Series Hybrid Solar Vehicles. Control Engineering Practice, 18, 1231-1238. http://dx.doi.org/10.1016/j.conengprac.2010.01.015
[19]	Matsumoto, S. (2005) Advancement of Hybrid Vehicle Technology. Proceedings of IEEE European Conference on Power Electronics and Applications, Dresden, 11-14 September 2005, 1-7. http://dx.doi.org/10.1109/epe.2005.219775