On Efficient Monitoring of Process Dispersion using Interquartile Range

Abstract

The presence of dispersion/variability in any process is understood and its careful monitoring may furnish the performance of any process. The interquartile range (IQR) is one of the dispersion measures based on lower and upper quartiles. For efficient monitoring of process dispersion, we have proposed auxiliary information based Shewhart-type IQR control charts (namely IQRr and IQRp charts) based on ratio and product estimators of lower and upper quartiles under bivariate normally distributed process. We have developed the control structures of proposed charts and compared their performances with the usual IQR chart in terms of detection ability of shift in process dispersion. For the said purpose power curves are constructed to demonstrate the performance of the three IQR charts under discussion in this article. We have also provided an illustrative example to justify theory and finally closed with concluding remarks.

Share and Cite:

Ahmad, S. , Lin, Z. , Abbasi, S. and Riaz, M. (2012) On Efficient Monitoring of Process Dispersion using Interquartile Range. Open Journal of Applied Sciences, 2, 39-43. doi: 10.4236/ojapps.2012.24B010.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] W.A. Shewhart, "Economic control of quality manufactured product. D. Van Nostrand", (reprinted by the American Society for Quality Control in 1980, Milwauker, WI), New York, 1931.
[2] M. Riaz, "A Dispersion Control Chart", Communications in Statistics - Simulation and Computation, 37(6), 1239-1261, 2008.
[3] D.M. Rocke, "Robust Control Charts", Technometrics, 31(2), 173-184, 1989.
[4] L.G. Tatum, "Robust Estimation of the Process Standard Deviation for Control Charts", Technometrics, 39(2), 127-141, 1997.
[5] D.M. Rocke, " and Charts: Robust Control Charts", Journal of the Royal Statistical Society. Series D (The Statistician), 41(1), 97-104, 1992.
[6] H.A. David, "Early sample measures of variability", Statistical Science, 13(4), 368-377, 1998.
[7] S.A. Abbasi, and A. Miller, "On proper choice of variability control chart for normal and non-normal processes", Quality and Reliability Engineering International, 28(3), 279-296, 2012.
[8] B.W. Silverman, "Density Estimation for Statistics and Data Analysis", Chapman & Hall, London, 1986.
[9] M.D. Mart?nez - Miranda, M. Rueda, and A. Arcos, "Looking for optimal auxiliary variables in sample survey quantile estimation", Statistics, 41(3), 241-252, 2007.
[10] P.V. Sukhatme, and B.V. Sukhatme, "Sampling Theory of Surveys with Application", Iowa Statistical University Press, New York, 1970.
[11] M.M. Rueda, A. Arcos, J.F. Mu?oz, and S. Singh, "Quantile estimation in two-phase sampling", Computational Statistics & Data Analysis, 51(5), 2559-2572, 2007.
[12] M.M. Rueda, A. Arcos, and M.D. Martínez, "Difference Etimators of Quantiles in Finite Populations", TEST, 12(2), 481-496, 2003.
[13] D.C. Montgomery, "Introduction to Statistical Quality Control", 6, Wiley, New York, 2009.
[14] R.J.M.M. Does, and B.F. Schriever, "Variables control chart limits and tests for special causes", Statistica Neerlandica, 46(4), 229-245, 1992.
[15] M.B.C. Khoo, "Designs of runs rules schemes", Quality Engineering, 17, 27-43, 2004.
[16] M.V. Koutras, S. Bersimis, and P.E. Maravelakis, "Statistical process control using shewhart control chart with supplementary Runs Rules", Methodology and Computing in Applied Probability, 9, 207-224, 2007.
[17] M. Riaz, and A. Saghir, "A mean deviation-based approach to monitor process variability", Journal of Statistical Computation and Simulation, 79, 1173–1193, 2009.
[18] A. Saghir, Z. Lin, S.A. Abbasi, and S. Ahmad, "The Use of Probability Limits of COM–Poisson Charts and their Applications", Quality and Reliability Engineering International, 1-16, 2012.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.