[1]
|
D. Makovec, Z. Samadmija and M. Drofenik, “Solid Solubility of Holmium, Yttrium, and Dysprosium in Ba-TiO3,” Journal of the American Ceramic Society, Vol. 87, No. 7, 2004, pp. 1324-1329.
doi:10.1111/j.1151-2916.2004.tb07729.x
|
[2]
|
D. Maga, P. Igor and M. Sergei, “Influence of Impurities on the Properties of Rare-Earth-Doped Barium-Titanate Ceramics,” Journal of Materials Chemistry, Vol. 10, No. 4, 2000, pp. 941-947. doi:10.1039/a909647g
|
[3]
|
J. Zhi, A. Chen, Y. Zhi, P. M. Vilainho and J. L. Batptista, “Incorporation of Yttrium in Barium Titanate Ceramics,” Journal of the American Ceramic Society, Vol. 82, No. 5, 1999, pp. 1345-1348.
|
[4]
|
Y. P. Pu, W. H. Yang and S. T. Chen, “Influence of Rare Earths on Electric Properties and Microstructure of Barium Titanate Ceramics,” Journal of Rare Earths, Vol. 25, Suppl. 1, 2005, pp. 154-157.
doi:10.1016/S1002-0721(07)60546-8
|
[5]
|
A. Jane, T. K. Kundu, S. K. Pradhan and D. Chakravorty, “Dielectric Behavior of Feion-Doped BaTiO3 Nanoparticles,” Journal of Applied Physics, Vol. 97, No. 4, 2005, Article ID 044311. doi:10.1063/1.1846135
|
[6]
|
L. E. Cross, “Ferroelectric Ceramics: Materials and Application Issues,” Ceramic Transactions, Vol. 68, 1996, pp. 15-55.
|
[7]
|
V. Dharmadhikari and W. Grannemann, “Photovoltaic Properties of Ferroelectric BaTiO3 Thin Films rf Sputter Deposited on Silicon,” Journal of Applied Physics, Vol. 53, No. 12, 1982, p. 8988. doi:10.1063/1.330456
|
[8]
|
T. R. Shrout and J. P. Dougherty, “Lead Based Pb(B1B2)O3 Relaxors vs BaTiO3 Dielectrics for Multilayer Capacitors,” Ceramic Transactions, Ceramic Dielectrics: Composition, Processing, and Properties, American Ceramic Society, Vol. 8, 1990, p. 3.
|
[9]
|
G. H. Haertling, “Ferroelectric Ceramics: History and Technology,” Journal of the American Ceramic Society, Vol. 82, No. 4, 1999, pp. 797-818.
doi:10.1111/j.1151-2916.1999.tb01840.x
|
[10]
|
W. Heywang, “Resistivity Anomaly in Doped Barium Titanate,” Journal of the American Ceramic Society, Vol. 47, No. 10, 1964, pp. 484-490.
doi:10.1111/j.1151-2916.1964.tb13795.x
|
[11]
|
S. Chatterjee and H. S. Maiti, “A Novel Method of Doping PTC Thermistor Sensor Elements during Sintering through Diffusion by Vapour Phase,” Materials Chemistry and Physics, Vol. 67, No. 1-3, 2001, pp. 294-297.
doi:10.1016/S0254-0584(00)00454-5
|
[12]
|
F. Batllo, E. Duverger, J. C. Jules, B. Jonnet, “Dielectric and EPR Studies of Mn-Doped Barium-Titanate,” Ferroelectrics, Vol. 109, No. 1, 1990, pp. 113-118.
|
[13]
|
V. C. S. Prasad and L. G. Kishore, “Studies on Some BaTiO3 Based Commercial Electroceramics,” Ferroelectrics, Vol. 120, No. 1, 1990, pp. 141-150.
doi:10.1080/00150199008221472
|
[14]
|
F. D. Morrison, D. C. Sinclair and A. R. West, “An Alternative Explanation for the Origin of the Resistivity Anomaly in La-Doped BaTiO3,” Journal of the American Ceramic Society, Vol. 84, No. 2, 2001, pp. 474-776.
doi:10.1111/j.1151-2916.2001.tb00684.x
|
[15]
|
W. Luan, L. Gao and J. Guo, “Size Effect on Dielectric Properties of Fine-Grained BaTiO3 Ceramics,” Ceramics International, Vol. 25, No. 8, 1999, pp. 727-729.
doi:10.1016/S0272-8842(99)00009-7
|
[16]
|
C. Y. Chen and W. H. Tuan, “Effect of Silver on the Sintering and Grain-Growth Behavior of Barium Titanate,” Journal of the American Ceramic Society, Vol. 83, No. 12, 2000, pp. 2988-2992.
doi:10.1111/j.1151-2916.2000.tb01671.x
|
[17]
|
T. Li, K. Yang, R. Z. Xue, Y. C. Xue and Z. P. Chen, “The effect of CuO Doping on the Microstructures and Dielectric Properties of BaTiO3 Ceramics,” Journal of Materials Science: Materials in Electronics, Vol. 22, No. 7, 2011, pp. 838-842.
|