Author(s)

Zufar I. Zaripov¹, Ilgiz R. Gabitov¹, Ruslan R. Nakipov¹, Farid M. Gumerov¹, Mansur I. Farakhov², Vener F. Khayrutdinov²

¹Federal State Budgetary Educational Institution of Higher Professional Education “Kazan National Research Technological University”, Kazan, Russian Federation.
²Limited Liability Company Engineering, Promotional Center “Inzhekhim”, Kazan, Russian Federation.

The investigation on thermodynamic properties (density ρ, viscosity ν) of heavy oil has been carried out in the temperature range 298 - 363 K at pressure 0.098 MPa, and thermal expansion coefficient α_p at pressures up to 49 MPa. The results of specific heat measurements of oil and oil products are presented at pressures up to 29 MPa and temperatures up to 613 K for heavy oil and temperature range of 323 - 473 K at atmospheric pressure for oil products. Thermal effects occurring during the processing of crude oil have been investigated. According to the obtained values of thermal expansion coefficients, density of the oil has been calculated for pressures up to 49 MPa.

Heavy Crude Oil, Mixtures, Specific Heat, Thermal Expansion Coefficient, Density, Viscosity, Heat Effect

Zaripov, Z. , Gabitov, I. , Nakipov, R. , Gumerov, F. , Farakhov, M. and Khayrutdinov, V. (2015) Impregnation of Carbonate Rock with Bituminous Compounds. III. Thermophysical Properties of the Impregnation Material. American Journal of Analytical Chemistry, 6, 1038-1049. doi: 10.4236/ajac.2015.613099.