Prof. Hamid Alemohammad
Advanced Test and Automation Inc., Ontario, Canada
Email: shalemoh@uwaterloo.ca
Qualifications
2010 Ph.D., University of Waterloo, Mechanical Engineering
2005 M.Sc., Sharif University of Technology, Iran, Mechanical Engineering
2003 B.Sc., Sharif University of Technology, Iran, Mechanical Engineering
Publications (Selected)
-
H. Alemohammad, E. Foroozmehr, B.
Cotten, and E. Toyserkani1, “A dual-parameter optical fiber sensor for
concurrent strain and temperature measurement: design,fabrication, packaging,
and calibration” Accepted for publication in IEEE/OSA Journal of Lightwave
Technology, November 2012.
-
E. Foroozmehr, H. Alemohammad, X.
Wang, E. Toyserkani1, S. Esmaeili, “Laser Assisted Surface Patterning of
Magnesium with Silver Nanoparticles: Synthesis, Characterization and Modeling”,
Journal of Physics D: Applied Physics, vol. 44, 495305, 2011
(doi:10.1088/0022-3727/44/49/495305).
-
H. Alemohammad, E. Toyserkani, “Metal
Embedded Optical Fiber Sensors: Laser-Based Layered Manufacturing Procedures”,
ASME Journal of Manufacturing Science and Engineering, vol. 133, 031015, 2011.
-
H. Alemohammad, E. Toyserkani,
“Simultaneous Measurement of Temperature and Tensile Loading using Tunable
Superstructure FBGs Developed by Laser-Direct Writing of Periodic On-Fiber
Metallic Films”, Journal of Smart Materials and Structures, vol. 18, 095048,
2009.
-
H. Alemohammad, E. Toyserkani,
“Modification of the Optical Performance of Fiber Curriculum Vitae, Hamid R.
Alemohammad Bragg Gratings Using Femtosecond Laser Micromachining”, Journal of
Laser Micro/Nano Engineering, vol. 4, no. 1, pp. 61-65, 2009.
-
J. D. Loveless, H. Alemohammad, S.
Esmaeili, E. Toyserkani, J. Li, V. Gurtsman, D. Emadi, “Laser-Assisted Maskless
Microdeposition of Silver Nanoparticles on a Magnesium Substrate”, Materials
Letters, vol. 63, pp. 1397-1400, 2009.
-
H. Alemohammad, E. Toyserkani, A. J.
Pinkerton, “Femtosecond Laser Micromachining of Fiber Bragg Gratings for
Simultaneous Measurement of Temperature and Concentration of Liquids”, Journal
of Physics D: Applied Physics, vol. 41, Article no. 185101, 2008. [Remark:
Collaboration with Laser Processing Research Center (LPRC) of the University of
Manchester]
-
H. Alemohammad, O. Aminfar, E.
Toyserkani, “Morphology and Microstructure Analysis of Nano-silver Thin Films
Fabricated by Laser-Assisted Maskless Microdeposition”, Journal of Micromechanics
and Microengineering, vol. 18, Article no.115015, 2008.
-
H. Alemohammad, E. Toyserkani, C. P.
Paul, “Fabrication of Smart Cutting Tools with Embedded Optical Fiber Sensors
Using Combined Laser Solid Freeform Fabrication and Moulding Techniques”, Journal
of Optics and Lasers in Engineering, vol. 45, no. 10, pp. 1010-1017, 2007.
-
H. Alemohammad, E. Toyserkani, S.
Esmaeili, “Deposition of Co-Ti Alloy on Mild Steel Substrate Using Laser
Cladding”, Journal of Materials Science and Engineering A, vol. 456, no. 1-2,
pp. 156-161, 2007.
-
C. P. Paul, H. Alemohammad, E.
Toyserkani, A. Khajepour, S. Corbin, “Cladding of WC-12Co on Low Carbon Steel
Using a Pulsed Nd:YAG Laser”, Journal of Materials Science and Engineering A,
vol. 464, no. 1-2, pp. 170-176, 2007.