Modeling and Numerical Simulation of Material Science
Vol.10 No.1(2020), Paper ID 96936, 14
pages
DOI:10.4236/mnsms.2020.101001
Numerical Model of Ultra-High Molecular Weight Polyethylene Abrasive Wear Tests
Tomas De la Mora Ramírez, Isaías Hilerio Cruz, Marco Antonio Doñu Ruiz, Noé López Perrusquia, David García Bustos, Martín Flores Martínez
Autonomous Metropolitan University, Azcapotzalco Unit, Azcapotzalco, Mexico City, Mexico
Autonomous Metropolitan University, Azcapotzalco Unit, Azcapotzalco, Mexico City, Mexico
Group of Materials Science and Engineering, Polytechnic University of the Valley of Mexico, Tultitlán, Mariano Escobedo, Mexico
Group of Materials Science and Engineering, Polytechnic University of the Valley of Mexico, Tultitlán, Mariano Escobedo, Mexico
University of Guadalajara, University Center of Exact Sciences and Engineering, Guadalajara, México
University of Guadalajara, University Center of Exact Sciences and Engineering, Guadalajara, México
Science and Engineering of Materials, Technological of Studies of Jocotitlán, Jocotitlán State of Mexico, Mexico
Copyright © 2020 Tomas De la Mora Ramírez, Isaías Hilerio Cruz, Marco Antonio Doñu Ruiz, Noé López Perrusquia, David García Bustos, Martín Flores Martínez et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
Ramírez, T. , Cruz, I. , Ruiz, M. , Perrusquia, N. , Bustos, D. and Martínez, M. (2020) Numerical Model of Ultra-High Molecular Weight Polyethylene Abrasive Wear Tests.
Modeling and Numerical Simulation of Material Science,
10, 1-14. doi:
10.4236/mnsms.2020.101001.