Materials Sciences and Applications
Vol.10 No.3(2019), Paper ID 91053, 11
pages
DOI:10.4236/msa.2019.103017
Strain Rate Effects on Tensile Properties of HDPE-PP Composite Prepared by Extrusion and Injection Moulding Method
Harekrushna Sutar, Himanshu Sekhar Maharana, Chiranjit Dutta, Rabiranjan Murmu, Sangram Patra
Chemical Engineering Department, Indira Gandhi Institute of Technology, Sarang, India
Materials Science and Engineering Department, Indian Institute of Technology, Kanpur, India
Chemical Engineering Department, National Institute of Technology, Trichy, India
Chemical Engineering Department, Indira Gandhi Institute of Technology, Sarang, India
Chemical Engineering Department, Indira Gandhi Institute of Technology, Sarang, India
Copyright © 2019 Harekrushna Sutar, Himanshu Sekhar Maharana, Chiranjit Dutta, Rabiranjan Murmu, Sangram Patra et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
Sutar, H. , Maharana, H. , Dutta, C. , Murmu, R. and Patra, S. (2019) Strain Rate Effects on Tensile Properties of HDPE-PP Composite Prepared by Extrusion and Injection Moulding Method.
Materials Sciences and Applications,
10, 205-215. doi:
10.4236/msa.2019.103017.